Question about Eljer Home

Open Question

Won't heat electricity verified to plug

Posted by on

  • US Parts Center
    US Parts Center Jul 03, 2014

    Hi bill bourlon, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
    I need to know what kind of heater is on the tub.

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Carrier Furnace won't start up


Sequence of events: call for heat at T-stat, inducer motor turns on, negative pressure created in heat exchanger closes pressure switch, pressure switch control wire runs through all safety's (these must all be in closed/safe position) if ok then glow plug lights. Time delay then gas valve opens, flame verified by "flame rod" t-stat = :)

Apr 22, 2013 | Heating & Cooling

1 Answer

Philips GC 2510 won't light up or heat up


If the iron doesn't heat, make sure power is on to the outlet,,test the outlet with desk lamp for to see if working. check the electrical cord, and check the thermostat + fuse inside replace if necessary.
God bless you1_25_2013_8_06_03_pm.jpg

Jan 25, 2013 | Philips GC 2510 Iron

1 Answer

WON'T HEAT AT ALL


check fuse, may need a thermostat,motor switch or a heating element. Check the heating element first. You need a voltage meter to do this. And hopefully the dryer is plugged into 240 electric

Sep 28, 2012 | Dryers

1 Answer

Cook top won't work and oven won't heat


check the plug it sounds like the plug is not secure only getting one leg of current push in firmly

Jul 29, 2012 | Maytag MER5775Q Electric Kitchen Range

1 Answer

Dryer won't heat up, therefore won't dry clothes. good air flow from vent. not sure what part may need.


If your ELECTRIC dryer is still running, but does NOT produce heat, the following two links can give you advice on how to troubleshoot an ELECTRIC dryer with a no heat problem:

http://www.fixya.com/support/r3576548-dryer_runs_but_does_not_heat

http://www.fixya.com/support/r3574266-thorough_dryer_advice


IMPORTANT: Your problem may or may not be related to a heating element problem as there are numerous factors that can cause a dryer not to heat. The heating element has protection devices that are designed to regulate the heat and internal temperatures. If the dryer overheats the Thermal Cut-Out (TCO) typically will blow BEFORE the heating element. The replacement kit is much cheaper than purchasing a new heating element that may or may not be the problem.

Begin by verifying the source voltage at the receptacle and service breaker, and verify your power cord.

The reason a dryer may still run if the input voltage is incorrect, is because the drive motor only uses a portion of the 220 service. The motor runs off 110-120VAC, while the heating circuits require 220-240VAC. So, if you are missing 1/2 your input voltage due to a tripped breaker or bad power cord, your dryer may exhibit these symptoms.


If you determine the problem to be internal, the heating circuits will either be located in the rear of the dryer on the right hand, or under the dryer drum. Usually, an easy way to determine is by the location of the lint screen filter. If the filter is on top of the dryer, the heating circuits are in the back of the dryer. If the lint screen is in the door, the heating circuits are located under the dryer drum.


NOTE: If either the TCO or Hi-Limit Thermostat are determined to be bad, replace BOTH components at the same time. That is why these components are commonly sold as a set. Failure to do so may result in premature failure of any parts you replace.

Replacement parts can be purchased at any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

The first three sites listed also have helpful exploded view parts illustrations that you can use to locate and properly identify any parts you may need. If you have questions, require additional assistance, please post back and let me know. I hope this helps you.

Aug 17, 2011 | KitchenAid KEYS700LQ Electric Dryer

1 Answer

My iron won't heat. it has electricity but won't heat


Hi,

Here is a tip that I wrote about Electric Irons and why they do not heat....

Electric Ironnot Heating Up or not Working Right heatman101

Jun 25, 2011 | Rowenta DE-480 Iron

1 Answer

No heat, I have verified 220 service both breakers are not tripping, 220 plug gets current. No obstruction in vent also ran without vent pipe attached I did notice last night sensor dyer level light...


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101

May 03, 2011 | Maytag MDE9700AYM Electric Dryer

1 Answer

No heat glow plug doesnt lite


If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer not Working Gas Dryer Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer Troubleshooting2_bing.gif Electric Dryer won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

May 11, 2010 | Whirlpool LGR5636L Gas Dryer

2 Answers

Admiral wont heat


Your breaker in the breaker box has a double pole breaker for the stove one breaker is shot so you still have 120volts which runs the lights 240volts for the elements.Turn main power off and replace the breaker. To verify for sure pull the stove out and unplug it check power at the plug you need 240volts at the plug. If i dont have a plug and wired straight in disconnect the wires and check the wires.

Sep 01, 2009 | Maytag Admiral LER3330AAW / LER3330AAZ /...

Not finding what you are looking for?
Home Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eljer Home Experts

john h

Level 3 Expert

12173 Answers

Mike

Level 3 Expert

4340 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you an Eljer Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...