Question about NewAir AW-210ED 21 Bottle Thermoelectric Wine Cooler

Open Question

NewAir aw-210ed top half has no power

No power to the led panel on the top zone

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

taran_2005
  • 10515 Answers

SOURCE: I have AW-280E NewAir 28

Hi,
I am sorry to hear the trouble.
From what you are explaining sounds like the fan was the problem to begin with...The fan cools the compressor...If it is not working properly then the compressor over heats and will not start.You might hear clicking sound when you turn it ON. Unplug the fridge ...Let the compressor cool...Take any kind of household fan...Point it so it is blowing on the compressor..Plug the fridge back in...If the compressor runs OK with the fan blowing on it ..then replace the fan motor....If it does not work then your compressor is bad...Not worth fixing.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!

Posted on Sep 22, 2011

imufo2
  • 3773 Answers

SOURCE: I think the fan on

FREEZER FAN MOTOR MAY NEED REPLACED. THE EASIEST WAY IS TO TAKE OFF THE BACK PANEL IN FREEZER AND REMOVE THE FAN
MOTOR, TAKE IT TO THE NEAREST APPLIANCE PARTS STORE WITH YOUR MODEL NO.
EASY JOB.
I'm including my article on Refrigerator Repair for your help and convenience.;
Please click or copy and paste into browser for Article

http://www.fixya.com/support/r5816737-fix_refrigerator_psychologically

need more help go here:

http://www.applianceaid.com/procedures.html

MORE TIPS AND TRICKS:
-----------------------------------------------------------------------------------------------------
STOP PAYING FOR EXPENSIVE WATER FILTERS FOR YOUR REF. DO THIS====
http://www.fixya.com/support/r9962087-stop_paying_high_price_refrigerator
-------------------------------------------------------------------------------------------------------
WATER SPLASHING IN FREEZER AT ICEMAKER
THE FILL TUBE IN BACK OF REFRIGERATOR CAN SLIP
AGAINST THE FILL RESERVOIR CAUSING A PARTIAL BLOCKAGE
OR BECOME CLOGGED WITH ICE.
REMOVE THE ICEMAKER AND INSPECT THE FILL TUBE.
RUN WATER IN TUBE TO ELININATE BLOCKAGE AND CHECK
TEMP IN FREEZER. IF TEMP IS BELOW 0 DEGREES, THATS
OVERKILL AND USUALLY A WASTE OF ELECTRICITY TO KEEP IT THAT COLD, NOT TO MENTION THE FILL TUBE FREEZING UP
----------------------------------------------------------------------------------------------------------------------
Thanks for using fixya
Leo Ponder
imufo2
Please VOTE FOR ME AND GIVE ME YOUR TESTIMONIAL IF POSSIBLE, IF THIS WAS HELPFUL
ITWILL BE MUCH APPRECIATED.

Posted on Sep 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't it connect to sensors?


From your description, it seems that the transmitter section of SC-001 is working properly. What you have done to reinstall the system may not be thorough. And it is unclear whether the control panel is not responding to keychain transmitter or sensor or both.

I assume that you have followed the instructions in the manual to clear the zones. Simply unplugging the AC power and removing battery will not clear the zones. Note that sensors can be programmed into zones 1 to 4. Keychain transmitter can be programmed into zone 5 only. There is no LED indication for zone 5.

Secondly, follow the instructions to program the sensor or keychain transmitter to the control panel. The corresponding zone LED will be flashing during programming. There is sound indication as well for successful programming of the device.

If you do not program the sensor or keychain transmitter to the control panel after clearing the zones, the control panel will no longer respond to the device.

The dialer and siren is not cleared on the control panel. They can be cleared only from the dialer or siren itself.

Dec 11, 2015 | Skylink Group Skylink Sc-100 Security...

1 Answer

Ids 816 alarm system problems


My indicator lights are not working on my control panel eg, power light etc, yet all the numbered keys are lit up. When I take the plug out the wall then the whole control panel does not work, need help please, I am not currently able to arm the alarm.

Apr 25, 2013 | Home Security

1 Answer

How to re-wire a Compaq Presario SR2150NX Case power Switch


The plastic front of your desktop computer is the Front Panel.

The area of contact pins on the motherboard, that the wires from the Front Panel go to, is the Front Panel header.

F_PANEL_1

The Front Panel header contains connections for the Power On switch, Power On LED light, HarDDrive activity LED light, and so on.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00864922&tmp_task=prodinfoCategory&cc=us&dlc=en&lang=en&lc=en&product=3339274

(Look at the motherboard photo. The Front Panel header is at the bottom right. Scroll down for the motherboard illustration )

There are 9 contact pins.
4 across the Top row, and 5 across the Bottom row.

The four pins across the Top row are numbered EVEN.

From the Left side going towards the Right side;
Pins 2, 4, 6, and 8. There is NO pin 10, just a blank spot.

The five pins across the Bottom row are numbered ODD.
Pins 1, 3, 5, 7, and 9.

A) Pins 2 and 4 are for the Power On switch

B) Pins 6 and 8 are for the Power On LED

(LED is dim when the computer is on? Switch the wires around )

C) Pins 1 and 3 are for the HarDDrive activity LED

(LED is dim when the harddrive is operating? Switch the wires around)

D) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

How to know which wires are for the Power On switch, Power On LED, and HDD LED?

Follow the wires into the Front Panel. Remove the Front Panel, and follow them.
(Need guidance removing the Front Panel post in a Comment )

For additional questions please post in a Comment.

Regards,
joecoolvette

May 02, 2012 | HP Compaq Presario SR2150NX PC Desktop

1 Answer

Mercury Motherboard PI845GLM-L manual needed for wire connections... please help me


If my information is correct;

Orient the motherboard so that we are both looking at it in the same direction,
Processor to the top, Ram Memory slots to the right, white PCI slots to the bottom.

The front plastic panel of your computer that has the Power On button, Harddrive activity LED light, and Power On LED light, is the Front Panel.

The area of pins on the motherboard, that the wires from the Front Panel go to, is the Front Panel header.

The Front Panel header is all the way down on the right corner. Panel 1.

The Front Panel header, or Panel 1, is a rectangular block that is positioned lengthwise, across the bottom of the motherboard.

There are 4 pins across the Top, and 5 pins across the Bottom.

The pins are numbered.
They are numbered Even across the Top row.
Pins 2, 4, 6, and 8. (There is NO Pin 10. Just a blank spot)

They are numbered Odd across the Bottom row.
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED light. (HDD LED)
Pin 1 is for the Positive wire. ( + )
{ Pin 2 is for the Negative wire. ( - ) }

If the LED light is dim when operating, turn the wires around.

B) Pins 5 and 7 are for a Reset switch, (Reset button), IF a Reset switch is used.
Pin 5 is for the Negative wire

C) Pin 9 is RVSD_DNU
Reserved Do Not Use.

D) Pins 2 and 4 are for the Power On LED light.
Pin 2 is for the Positive ( + ) wire.

If the LED light is dim turn the wires around.

E) Pins 6 and 8 are for the Power On switch.

For additional questions please post in a Comment.

Regards,
joecoolvette

Sep 16, 2011 | Mercury P4VM800M7 Motherboard

1 Answer

How to hook up the face plate of a emachine w3400 Wich includes 3 wires 1 power butten and 2 led lights


Look at the pinout of the Front Panel header, of the eMachine W3400's motherboard.

The plastic front of the computer is the Front Panel.
The area of pins on the motherboard, that the cables (Wires) from the Front Panel connect to,
is the Front Panel header.

The motherboard for an eMachines W3400 desktop computer is an MSI ms-7145
(Micro Star International)

Orient the motherboard in your view so that we are both looking at it the same way.
Processor to the Top, Ram Memory slots to the Right, white PCI slots (3) to the Bottom.

JFP1 is the Front Panel header.
(Junction Front Panel 1)

JFP1 is on the Bottom Right corner. There are two columns of pins arranged vertically.
(The JFP1 header runs parallel to the Right side of the motherboard)

The Left side column of the JFP1 header is numbered Odd.
Starting at the Top and going Down, the pins are numbered;
1, 3, 5, 7, and 9

The Right side column is numbered Even.
Starting at the Top and going Down, the pins are numbered:
2, 4, 6, and 8.
There is NO Pin 10

A) Pins 1 and 3 are for the HarDDrive Activity LED light. (HDD)
If the LED light is dim will operating switch the wires around

B) Pins 5 and 7 are for the Reset switch. (Reset button)
> IF Used

C) Pin 9 is Not used. (NC. No Connection)

D) Pins 2 and 4 are for the Power On LED light (If dim switch the wires around)

E) Pins 6 and 8 are for the Power On switch. (Power On button)

Trace the wires back to the Power On switch. Even if it means temporarily removing part of the Front Panel to see.

Same with the LED lights.
See which wires go to the Power On LED, and HDD Activity LED. (Harddrive Activity LED)

Follow the 3 wires, and tell me where they go to on the Front Panel.
USB port?
Memory Card Reader?
Firewire port? (a1394)

Nov 27, 2010 | AMD eMachines Desktop System w/ 17'' CRT...

1 Answer

My power led connector (green,white) power sw connector (black,white) got out of place and i dont where they go


The eMachines T3302 desktop computer, uses an FIC K8M-800M motherboard.
(First international Computer, Inc.)

Where those wires go on the motherboard, is termed a Front panel header.

The Front Panel is the plastic front bezel of your computer.
(Where the Power On button is, Power On LED light, and so on)

Looking at the motherboard with the Processor to the Top, Ram Memory slots to the Right, the Front Panel header is at the bottom right corner, and over to the left.

Look at the jumper block in the bottom right corner. Right in the corner.
This is the LED type selector, jumper block.
Has 6 pins.
3 across the Top, 3 across the Bottom.

(This jumper block is to set whether you are using a Power On LED light, that has Dual Colors, or a Single color.
The default setting of the jumper on the block, is set to use a Dual Color LED light, for the Power On LED)

Move to the left of this jumper block. The Front Panel header is to the left of this jumper block.

(FIC terms it a Front Panel Block Connector)

It should be White in color.
Is right against the bottom edge of the motherboard. (Parallel to the outside edge of the motherboard)

Has two rows of pins sticking up.
5 across the Top.
4 across the Bottom.

The pins are numbered from the Right, going towards the Left.

(From the Power On LED jumper block, towards the Front Panel header)

On the Top row going from Right, towards the Left,
Pins 1 ,3, 5, 7, and 9.

On the Bottom row going from the Right, towards the Left,
Pins 2, 4, 6, and 8.

A) Pins 1 and 3 are for the Power On LED light.
Pin 1 is for the Positive ( + ) wire.
(Green)

B) Pins 5 and 7 are for the Power On switch.
Pin 5 is for the Positive ( + ) wire.
(Black)

[Although it really doesn't matter which way the wires go. It's a SWITCH]

C) Pins 2 and 4 are for the HarDDrive activity LED.
Pin 2 is for the Positive wire ( + )

D) Pins 6 and 8 are for the Reset switch.
(IF used)

If any of your LED lights are dim, after attaching the Positive wire for each LED, it's because the Positive wire is on the wrong pin.
Switch the wires around

Aug 23, 2010 | E-Machines T3302 PC Desktop

1 Answer

On a hp compaq 6710b where/ how do i switch wifi on?


The wireless button should be located on the top left part of your laptop. It will be the 3rd button from the left.

11bffdfe321d68aa11aa600332bfe03c.png e8721ff914fb66ee83d789398c8a2a31.png e8721ff914fb66ee83d789398c8a2a31.png d44fad740e4749adb4fe5f87725dd44f.png 1. Volume mute button with LED indicator
2. Volume scroll zone with up/down LED indicators
3. Integrated microphone 4. RJ-11/modem port
5. Optical drive 6. Media Card Reader 7. 2 USB 2.0 ports 8. HP Fingerprint Sensor 9. Integrated stereo speakers 10. Touchpad with scroll zone 11. Touchpad Buttons 12. Hard drive activity / HP 3D DriveGuard LED 13. Battery charging LED
14. Power/standby LED
15. Wireless on/off LED
16. Power button with LED
17. HP Info / HP QuickLook button with LED indicator
18. Wireless on/off button with LED indicator
19. HP Presentation button with LED indicator
20. WLAN antennas (with WLAN option)
21. WWAN antennas (with WWAN option

Jul 11, 2009 | HP Smart Buy Notebook

1 Answer

Fan flow error 1611 I/O


The ProLiant DL380 G3 server requires that both primary and redundant fans exist in a specific configuration in order to perform optimally. Any deviation from the specified configuration will cause one of the above error messages to occur and the internal Health LED to illuminate. In a ProLiant DL380 G3 server without the redundant fan option, the server will shut down after the error message is displayed. In a server with the redundant fan option, the internal Health LED will illuminate and the appropriate error message regarding fan redundancy will be displayed. The purpose of this document is to detail the required configuration for both primary and redundant fans.
DETAILS Both primary and redundant fans in the ProLiant DL380 G3 server must be configured to meet specific requirements in order to avoid the error messages above and in some instances, subsequent shutdown of the server.
All primary fan locations (2, 4, 5, 6 and 7) must be populated with a fan before the redundant fan locations (1, 3, or 8) are populated. If a primary fan location is left unpopulated, the server will display one or more of the error messages shown above. In addition, the internal Health LED (the top LED on the front panel of the server) will display the status of the fans.
When the redundant fan option is used, all redundant fan locations must be populated. ProLiant servers do not support partial population of redundant fans. If any redundant fan location is populated without also populating all other redundant fan locations in the server, the fan system will not be fully redundant and one or more of the error messages above will be displayed.
Figure 1 below illustrates a ProLiant DL380 G3 server configured with all eight fans installed for fan redundancy. The server airflow is divided into three zones: processor, I/O and power supply. Shared fans 4 and 7 each provide airflow for two zones. If a shared fan fails, the failure is experienced in both zones.
Figure 1: ProLiant DL380 G3 server configured with all eight fans installed for fan redundancy
The internal Health LED (the top LED on the front panel of the server) indicates failed or missing components. The internal Health LED should be observed to determine the status of the fans as follows:
RED LED: A red LED indicates that the minimum fan requirements have not been met. Minimum fan requirements indicate that all primary fan slots must be populated with functioning fans.
  • If the 1611 fan "x" is not present (where "x" is the fan location) error message is displayed at POST and the internal Health LED is red , then a primary fan is missing.

  • If the 1611 fan "x" failure (where "x" is the fan location) error message is displayed at POST and the internal Health LED is red , then a primary fan has failed.
AMBER LED: An amber LED indicates that the minimum fan requirements have been met; however, requirements for redundant fan configuration have not been met. This means that all primary fan slots are populated with functioning fans, but at least one redundant fan has either failed or is missing.
  • If the 1611 fan "x" is not present (where "x" is the fan location) error message is displayed at POST and the internal Health LED is amber , then a redundant fan is missing.

  • If the 1611 fan "x" failure (where "x" is the fan location) error message is displayed at POST and the internal Health LED is amber , then a redundant fan has failed.
Note: In a redundant fan configuration, the error message fan system not fully redundant will also be displayed at POST if any redundant fan slot is left unpopulated or if a redundant fan has failed.

Nov 21, 2008 | HP Compaq ProLiant DL580 G4 (430811001)...

Not finding what you are looking for?
NewAir AW-210ED 21 Bottle Thermoelectric Wine Cooler Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top NewAir Heating & Cooling Experts

Donni Steen

Level 3 Expert

659 Answers

L Pfaff
L Pfaff

Level 3 Expert

11573 Answers

Tom Chichester

Level 3 Expert

33294 Answers

Are you a NewAir Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...