Question about JVC DR-MV5S DVD Recorder/VCR

Open Question

What channel setting shold the dvd need to be on is L1 still good

Or what tv imput

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

VOTIT
  • 2071 Answers

SOURCE: I have a LT-37sh6 tv

No sound problem is power amplifier trouble maybe the IC there is defected or cold solder of joint of the parts.Cold solder issues - each component is soldered into small holes on the printed circuit board which in turn connects said component to the other components. Due to time, heat, use, some solder joints would be cracked or loose. It is possible that the cold solder is still minimally connected (hanging by a thread). When the receiver turns on heat would be generated which would be sufficient to further loosen up the solder joint to the point it no longer provides electrical contact. Jarring the unit creates movement inside enough to re establish the contact, sometime good enough sometimes not enough.

Again, since the unit still operates (sometimes) then it is highly probable that there are no defective components. As you have surmised, it is possibly a loose connection, solder joints are "connections" except that molten soldering lead is used to attach/connect the component to the board, "loose connection" in this sense is equal to "cold solder".

Again on the assumption of no defective parts, then seeking a more experienced buddy for the soldering might be to your advantage. This is of course in addition to the possible electrical hazards when repairing....If i have helped,please click fixya.It is the only way i get paid for my work...

Posted on Jul 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was able to connect a dvd player to old tv with a rf modulator.now is there a way to hook up a vcr on same rf modulator so as not to change connections each time you want to watch the vcr with instead of...


well...the reason its sooo hard is that this modulator is not intended for this use. its used for BIG jobs. you can normally do what you want with a simple rf modulator you buy at walmart or radio shack as it has a cable in and cable out, but

You dont even need a rf modulator.
The VCR can do it for free simply; hook the yellow , white if your vcr has red as well (depending on how old )...BOTH or all Three color to color from VCR(INPUT) to DVD
then use a piece of coax cable from the vcr out to tv.

test vcr by making sure that it work on either channel 3 - or 4 on tv. (leave VCR on)

Then to test your DVD connection first turn DVD player on.;.Then on front of VCR press channel down ON VCR until it says L1 or L2 this is under channel 2 when channel downing.

you should now see the dvd player on screen on either L1 or L2 depending on vcr.

now buy doing this your vcr must be on the L1 (L2) anytime you watch a dvd but when you want to watch a tape you just put it in and press play since TV itself is never changed.
when you want to go back to dvd,...stop tape and should still be right on the L1 or L2 again.

Aug 05, 2011 | Channel Vision E-1200 Video/audio Rf...

3 Answers

I cannot record from tv ? how do you get the channel on that you want to record ? i can dub, play tapes or dvd's, but can't record ?


This model does not have a tuner so you will not be able to record off of tv unless you run your cable box or dish satellite's audio and video outputs through the dvd recorder's front or back inputs(L1 or L2) and record from those sources. Even then the cable box or satellite box would have to be tuned to the channel that you want to record. If you choose to do this you must go to your on screen menu and under setup/general settings/video/video input you will need to select the video input source(L1,rear or L2, front).

Sep 21, 2010 | Magnavox ZV427MG9 DVD Recorder VCR

1 Answer

I can't find the input channel on my TV. Spent over 90 minutes searxhing for it! No VCR ever has been that complicated!


If you are using a Coax link, has to be channell 3 or 4.
If you are using a diferent set of wires, then look for AV imput or Component imput on your tv.

Dec 05, 2009 | Philips Magnavox DVD/VCR Dual Player

2 Answers

How do I record a TV Program.


Video & Left,Right audio go out of Comcast cable box to L1 input on DVD recorder,Video & Left,Right audio go out of DVD recorder to a line input of your TV.  Record L1 input on DVD recorder.

Jan 10, 2009 | Panasonic DMR-E80H DVD Recorder

3 Answers

RCS Scenium


What is your TV input connection? Are you using Antenna? Cable? Dish?

The Unusable Signal sounds like the TV is not getting a signal. Does your TV have a built in HD Tuner?

If you are using Antenna you might want to try setting up the connections and it should search for quality channels that you get good signal strength. If you are on channel 2 and there is no over the air channel 2 it may say "unusable signal".

Sep 24, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Dvd/vcr combo


I'l make sure, but I beleave L1 and L2 are inputs. You need to select the one where the show comes from, Its it coming from the L1 connector or L2.

Your device doesn't have a tuner input jack. To record TV programs on your DVD/VCR, you need to connect this DVD/VCR to an external tuner device (e.g., set top box, cable box or satellite receiver) that has audio/video output jacks.

Il confirm this and reply to you in a moment.

May 18, 2008 | Televison & Video

1 Answer

Imput channel or imput switch


if you scan down below channel 2 doesn't video show up? otherwise there should be a input / video button

Dec 31, 2006 | Zenith B27B40Z 27" TV

1 Answer

Will not work with cable


The set has a problem with the tuner itself and there are no resets in this new sets,you should remove the back cover and carefully tap with a wooden or rubber handle the tuner area where the cable comes in to see if a channel would tunes in,if it does react is likely it has loose conections in the tuner grounds or pins,the conector where you screw the cable to can not be loose either,it should be nice and solid,if you are familiar with tv service is something you can try but if you are not too familiar call for assistance from a servicer or just save the money and use a vcr to change the channels using the same imput as the dvd player unless you have two separete aux.imputs. Let Us know if you need more information.

Nov 10, 2006 | Sony KV-35S45 35" TV

2 Answers

Can I play the video and a dvd without the remote control?


Your set should have external video and audio imput jacks besides the tuner imput for antenna,you can use the video and audio outputs from the vcr or DVD and conect them to the video and audio imputs in the tv then you can select a channel below 1 or push the switch that says Video/antenna.

Oct 02, 2006 | Samsung CXD2512 25 in. Combo

1 Answer

External DVD won't play - no manual available anywhere


The tv has a set of imputs for audio and video ,there is a posibility your dvd is not working right,you can also try a vcr by using the rca audio and video outputs of the vcr to the rca audio and video imputs of the tv,that will tell you if the dvd is not working ,the tv should have a switch selector for video and antena or have a channel below 1 called aux.

Oct 02, 2006 | RCA T13208 13 in. TV/VCR Combo

Not finding what you are looking for?

Open Questions:

See all JVC DR-MV5S DVD Recorder/VCR Questions

JVC DR-MV5S DVD Recorder/VCR Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73591 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...