Question about Frigidaire PLHS67EGSB Stainless Steel Side by Side Refrigerator

1 Answer

Frigidaire PLHS67EGSB1, the digital guage to set the tempoearture keeps chaning. set it at 0, day later might read 16, one tap down and goes back to 0. Next day might read 8, same thing. What can cause this, and how to stop this so my freezer quits getting warm and holds the set temperature?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Frigidaire Master
  • 4,654 Answers

Most likely the=> 241608401 Thermistor and the=> 241608501 Freezer Thermistor You will need to begin somewhere and with the symptoms you are having it brings the controls the regulate temperatures to the top of my list for what may be causing this. PLHS67EGSB1 Controls item 21 and 21A are the thermistors I am here should you have questions, Thanks, John Tripp Appliance 911

frigidaire PLHS67EGSB1, the digital guage to set t - uploads>parent.mediatoolbar.onimageuploaded('error with image');

Posted on Feb 13, 2014

Testimonial: "Thanks, I agree, should be a good place to start. I'm fairly mechanical, is this a fairly straight forward part to put in? Any tips or tricks? I had a repair place out to look at the freezer last week, he left in 30 seconds saying 'I can't find anything wrong', and charged me $70. I'd like to do it myself if possible. Thanks much!!!"

  • John Tripp
    John Tripp Feb 16, 2014

    Sorry I did not get back with you sooner. Fixya did have a time when the customer replied I would be notified. They are going through some big changes and I just don't know how to handle the changes. I just want you to try the parts I recommend. Make sure they are put back exactly as they were located. If you still need help let me know by getting my e-mail at this address=> The link below revels my address, Thanks John Tripp http://www.google.com/recaptcha/mailhide...

  • Russ Peterson
    Russ Peterson Feb 17, 2014

    thanks John. I'm about to try these parts. Freezer did it again a few times. So 'something' is telling the display to change temperatures, and then to hold that temperature. Thermistor do that? Good part is, if i have it set at 0, it checks out at 0, if it 'changes' itself to 14, the temp is 14, so no issues there. Just on how to get the display to quit thinking someone is changing the temp on it. . . . . Still thinking thermistor? Thaks!

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fridgetech
  • 473 Answers

SOURCE: food stays frozen regardless of temperature setting

It is possible it has a bad thermostat but most likely cause would be a bad damper motor.  It is the vent inside the fridge that opens and closes, based on temp. setting, to allow cold air from the freezer into the fridge section.

Posted on Oct 14, 2007

  • 1314 Answers

SOURCE: Frigadaire freezer cold but fridge compartment is warm

i need the complete model number to narrow it down they still make the frs20zrg to this day the last two numbers like frs20zrgwo or frs20zrgw9 is what will tell me what kind of defrost system it has the serial plate is in the fridge side up by the light bulb or on the left hand side or right hand side of the fridge compartment up near the top sorry to be a bother but its necessary

Posted on Mar 30, 2008

aborcass
  • 2651 Answers

SOURCE: does outside temperature affect performance of freezer

Top mount refrigerator installed in a garage and the food in the freezer is defrosting when
the temperature in the garage goes below 55 degrees fahrenheit.
On top mount refrigerators you cycle the compressor and fan/fans from the food
compartment temperature. When the room temperature gets colder than 55 F, you have
long off times waiting for the food compartment to warm enough to trip the cold control.
This long off time is allowing the freezer temperature to get high enough that food can start
to defrost.
There is a kit for refrigerators installed in applications where the temperature can go as low
as 34 F and still maintain good freezer temperatures. The kit part number is 5303918301
and it contains a heater that mounts in the control box and an instruction sheet advising
how to install the heater.
Kit 5303918301 contains:
Part # 5303950194 Instruction sheet
Part # 241532101 Heater

Posted on Nov 21, 2008

  • 72 Answers

SOURCE: Frigidaire Frig side by side making a loud buzzing noise

it sounds like the compressor, or something near it. it is generally the only moving part in a refrigerator other than the door, so would be my first guess. If it is constantly running, but staying cool in the freezer there may be a small leak somewhere or the compressor is losing power, and pumping slower.

Posted on Jun 15, 2009

heatman101
  • 43501 Answers

SOURCE: Refrigerator gets too warm, then too cold, back and forth...

Hi,
There are a few reasons why the refrigerator part will not cool...here are a couple of tips that will help you to figure out why the refrigerantor is not cooling...

Refrigerator2_bing.gif not Cooling or Fridge not Cooling
http://www.fixya.com/support/r3662945-refrigerator_not_cooling_or_fridge_not

How to Defrost Refrigerator Defrost Timer Problem
http://www.fixya.com/support/r3771673-defrost_refrigerator_defrost_timer

heatman101

Posted on May 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fridge temperature too hot won't go down with temperature controls


This looks like there is a problem with thermstat in the fridge. We had a fridge that would not cool and we found it to be the thermastat problem. You have to replace the thermstat on the fridge. Not 100% sure but a high possibility.

Mar 23, 2014 | Frigidaire Refrigerators

1 Answer

Frigidare PLHS67EGSB1 IS 6 YEARS OLD Temperatue Fluctuates On freezer side


Good Morning bernie3003 - For this particular model, the control on the door is the brain which controls all the functions of the unit. If the temperature inside the unit is not reading the correct temperature, then there might be a thermistor or wiring issue between the thermistor and the main control board on the door. I would personally contact a professional to accurately diagnose the refrigerator to determine the root cause to reduce the risk of unnecessary parts.

May 19, 2013 | Frigidaire 22.5 Cu. Ft. Counter-Depth...

1 Answer

2010 FLHTK HARLEY-DAVIDSON I noticed the oil pressure dropped from around 32 to what appeared to be 16. Then it dropped almost to 0. I pulled over and let it cool down for 15 minutes and rode to my de


Hi Tonykoegel, if your oil pressure gauge is acting eratic or your oil pressure light stays on you could have a faulty sending unit, gauge or air in the system or a restricted oil filter, start by checking oil level in tank and make sure it is between the add and full mark. With engine at normal operating temperature 180-230 degrees and the use of a 10 micron synthetic media oil filter, oil pressure will be 30-38 psi at 2,000 RPM and 3-5 psi. at idle. The oil pressure light is designed to come on at 2 psi. or less. To accurately test oil pressure remove oil pressure sending unit and install known good oil pressure gauge that reads 0-50, there might possibly be some plumbing required for hard to access points. If you are out in the middle of nowhere and there is no cell phone service and your oil pressure gauge isn't working and your oil pressure light is burned out, despair not, you still have one last line of defense left HYDRAULIC LIFTERS, as long as those tireless workers are quiet, you have oil pressure, maybe not much, but enough to get you down the road at a slow to moderate speed using the least amount of RPMS as necessary. Good luck and have nice day.

Jul 02, 2012 | 2010 Harley Davidson FLHTK Electra Glide...

1 Answer

Gardenline - garden tap timer.I can't work out the instructions- the timer won't work . Please help and give me an easy guide line to the instructions.


1. Press PROG
2. Press up/down arrows to select the programme you wish to set (16 spaces are available)
3. Press SET
4. Press up/down arrows to set the hour at which watering is to start
5. Press SET to store the hour
6. Press up/down arrows to set the minutes at which watering is to start
7. Press SET to store the minutes
8. Press up/down arrows to set the number of hours over which watering is to take place (0-9)
9. Press SET to store the hours
10. Press up/down arrows to set the number of minutes over which watering is to take place (0-59)
11. Press SET to store the minutes
12. Press up/down arrows to select which days of the week watering is to take place (2nd means every second day, 3rd means every third day). When the required day of week is displayed press SET to store that day. The next day of the week will then be displayed and Set can again be used to store that day. Carry on throughout the seven days of the week as required.
13. Press the clock symbol to store the programme.

Mar 07, 2011 | Hardware & Accessories

1 Answer

How do i set timer


How to program Raindrip R673CT

Download R673CT manual at raindrip

Other models
R683CP
R672CT
Raindrip drip water guide

R673CT
b555ee0.jpg

Install 2 AAA batteries to power display

Set current time:
Press TIME and hour digit flashes > Use up-down arrows to set 24 hour clock
Press SET to confirm hour
Use up-down arrows to set minute
Press SET to confirm minute
Use up-down arrows to set day of week
Press SET to confirm day

Program review
Timer can set 16 watering schedules
When programming, look at display:
Notice: PROG for programming mode, #1, start time, run time, SU MO WE for days
7f63762.jpg
Press PROG and display appear just like image above
Use arrows to select 1, 2, 3, 4 through 16 different watering schedules


Programming
Press PROG and display appear just like image above
Use arrows to select 1, 2, 3, 4 through 16 different watering schedules
Start time hour will flash
Once hour flashes, use arrows to select hour
Press SET to confirm hour
Minutes will flash
Use arrows to select minute
Press SET to confirm minutes
Run time hours will flash
Use arrows to set run time hours duration (0 to 9 hours)
Press SET to confirm
Run time minutes will flash
Use arrows to set run time minutes
Press Set to confirm

Now #2 shows on display this is about which days the timer will water
Decide 1) every other day, 2) every third day, or 3) watering at will

1) To water every other day:
While 2nd is flashing, press SET and SU TU WE FR will appear in display
Press SET to confirm

2) To water every third day:
While 2nd is flashing, press down-arrow
3rd will start flashing and TU WE SA will display
Press SET to confirm

3) To water at will:
While 2nd is flashing, press down-arrow twice
SU will flash
Press down-arrow to go to MO TU WE etc
Press SET when day you want appear on display

To set another watering program
Scroll back up to "programming" on this page
Press arrows to select programming 1 thru 16
Repeat programming sequence

After programming is set, press clock button and current time will show

Oct 07, 2010 | Raindrip R673CT Digital Water Timer

1 Answer

Fuel guage moving all over 2006 chevy trailblazer


I had this problem as well. Took it to the garage and it was a $700 bill the part alone was $440 they had to drop the gas tank - and since then it's not been working right. The fan clutch went a week later another $700 bill. Picked it up and it was still making the same sound - garage replaced another sensor without charging me--picked it up and three days later the service engine light came on. Back to garage and another $80 part was needed under the hood. All this with just 52,500 miles and I keep it well maintained. Not a happy camper at all! Holding my breath but it's been only two days so far so good.

Apr 30, 2010 | 2006 Chevrolet Trailblazer

1 Answer

Date and Time Setting


You can download the manual for the 1260-3 which I guess is very similar from the link below: http://www.victortech.com/admin/images/products/1260-3%20manual.pdf Here are examples of the date & time setting: Set DATE to September 14, 2004 (09-14-04) 1. Depress the C or C/CE key.Your display with show 0. and the tape will read 0.C. 2. Depress the TIME/DATE key and hold until the display is flashing. 3. Enter the month, in our example, 09. Your display will show 9. 4. Enter the day, in our example, 14. Your display will show 914. 5. Enter the year, in our example 2004, as 04. Your display will show 91404. 6. Tap the TIME/DATE key to set the DATE. Your display will now show 09-14-2004. 7. To PRINT the DATE, depress the (#/S) key, your tape will show # 9.14.2004. Set TIME to 4:37 PM 1. Depress the C or C/CE key. Your display with show 0. and the tape will read 0.C. 2. Depress the TIME/DATE key and hold until the display is flashing. 3. Tap the TIME/DATE key to go to Time Mode. 4. Enter the hour, in our example 16 in military time. Your display will show 16. 5. Enter the minutes, in our example 37. Your display will show 1637. 6. Tap the TIME/DATE key to set the TIME. Your display will now show P 04-37-00 and the seconds will begin counting. 7. To PRINT the TIME, depress the (#/S) key, your tape will show #?04?37. Please update the question & let us know if the information given was useful to you - Good Luck!

Aug 17, 2007 | Victor 1260-2 Calculator

Not finding what you are looking for?

Open Questions:

See all Frigidaire PLHS67EGSB Stainless Steel Side by Side Questions

Frigidaire PLHS67EGSB Stainless Steel Side by Side Refrigerator Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Refrigerators Experts

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Frigidaire Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...