Question about Samsung RS2630SH Side by Side Refrigerator

1 Answer

Small ice cubes The ice maker is not supplying enough water. The result is very small ice cubes. The water supply pressure is on max, can there be a way to adjust the water level? The tray is not even filled half way.

Posted by on

  • 2 more comments 
  • Anonymous Mar 12, 2014

    water supply is good, temp is cold enough, ice in tray but will not come out

  • Anonymous Mar 15, 2014

    crashed ice ,and cube ice and water kept switcing by itself

  • Anonymous Mar 16, 2014

    I have my ice maker on cubed but it gives me both cubed and crush at the same time and it takes forever to fill my glass

  • Anonymous Mar 31, 2014

    ice maker is producing ice but it is large ice cubes and stuck together

×

Ad

1 Answer

The ice maker is time filled, it only has a certain time in which to fill. There is no way to adjust the water level. Check the pressure limiting valve which is in the water line before the filter. Have you replaced the filter? Remove the filter and pressure limiting valve and see if the ice maker receives more water. If it does, then replace the filter and check again. If it is still good, the pressure limiting valve is faulty.

Posted on Nov 03, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ice maker is not producing ice and the control light is blinking red


Inspect the ice maker mold to see if there are ice cubes present. If there are no cubes or very small cubes, then you should look for issues with the water fill system. Inspect the fill tube and the fill cup area at the back of the ice maker to make sure that they are not frozen. If there is an ice buildup in that area, confirm no foreign objects have disrupted the flow of water into the fill cup. If nothing obvious has caused the ice buildup then suspect the inlet valve, tubing or low water pressure. Inspect the outlet tubing from the fill valve to the ice maker fill tube for any signs of restrictions and replace if necessary.


Check the water inlet valve for any restrictions. You will need to shut off the valve from the household water supply before you disconnect the inlet tubing. Some water inlet valves may have a screen to filter debris before it can enter the valve. If the screen is plugged, water flow will be restricted and the result will be small or layered ice cubes. Remove and clean the screen or replace the valve.

Jun 04, 2015 | Refrigerators

1 Answer

Ice cubes are too thin. Making on time, but no volume due to small cubes. What part will correct this?


Well this thing is made to make ice cubes so if the ice cube are to small thin then you water supply must be restricted because its cold enough to make the ice just the volume of water isn't their .Check the feed system for restrictions .

Jun 01, 2015 | Whirlpool Gold Series GI15NDXT 15"...

1 Answer

Ice maker makes small cubes. Low water pressure at door


Is water pressure to house normal? Have you moved Refrigerator recently? if so you may have crimped water supply pipe or tube.
Is the valve for that pipe full on? Or was it turned off to do something to the water supply? Last time Water filter was changed? Electric valve for water dispenser may be clogged. That's the last place I would look. Small cubes may be an adjustment or switch to cause partial fill.

Mar 17, 2015 | Maytag MSD2758GEB Side by Side...

1 Answer

Poor quality ice


Is the ice too small or is it dirty in appearance? If it is too small then the 1.4 inch water supply line may be pinched or clogged. Trun off the water to the unit and remove the line connected to the rear of your fridge. Then get a large bowl and have someone turn on the water supply. If there is sufficient pressure then more than likely the inlet screen to the ice maker water valve is obstructed and will require cleaning. Follow the input water line to the ice maker water valve. Some valved can have the screen cleaned with the valve installed by removing the input line and then the input screen. You can gain access to the screen by removing the flexible back panel, remove it by using a pointed tool on the outside of the screen ede only. Then wash / or scrub it clean with your fingers while running water over it. Reinstall the screen, reconnect the valve input line and then reconnect the water supply line and turn on the water supply. It can take several hours before the unit starts making ice cubes again as you have intorduced air into the system and it will self purge during the next few ice making cycles. You should have the correct sized cubes within 24 hours. If the cubes are dirty then go to any appliance parts supply store, purchase a charcoal filter and install it just above the inlet supply line connection.

Jan 02, 2010 | Whirlpool 21.0 cu. ft. Top Freezer...

1 Answer

Our ice machine does not make full ice cubes. they are small and not complete, they are full of holes.


The icemaker requires a water pressure of 1.5 - 8.5kgf/cm2. It is acceptable if the water supply fills a cup of 180cc with water in 3 seconds. The icemaker produces small cubes if the water fed into it is not enough and lumped together if too much water is supplied. In order to obtain the desired size of ice cubes, the amount of water supplied to the ice maker needs to be adjusted. Adjust the valve supplying water to the icemaker or the unit in general in such a way that right amount of water fills the ice tray.

Nov 06, 2009 | Whirlpool 25.6 cu. ft. Side-by-Side...

1 Answer

How do you change the ice cube setting on the 25cf LG French Door bottom freezer? I cannot see anywere in the manual where it indicates where you change this setting?!


The icemaker requires a water pressure of 1.5 - 8.5kgf/cm2. It is acceptable if the water supply fills a cup of 180cc with water in 3 seconds. The icemaker produces small cubes if the water fed into it is not enough and lumped together if too much water is supplied. In order to obtain the desired size of ice cubes, the amount of water supplied to the ice maker needs to be adjusted. Adjust the valve supplying water to the icemaker or the unit in general in such a way that right amount of water fills the ice tray.

Nov 05, 2009 | LG LFX25960 Bottom Freezer French Door...

1 Answer

My ice maker is letting too much water go into the ice tray so it freezes in a solid piece. Cubes do fall down but there is so much water it freezes into a solid block


The icemaker produces small cubes if the water fed into it is not enough and lumped together if too much water is supplied. In order to obtain the desired size of ice cubes, the amount of water supplied to the ice maker needs to be adjusted. Adjust the valve supplying water to the icemaker or the unit in general in such a way that right amount of water fills the ice tray.

Oct 30, 2009 | Sub-Zero Bottom Freezer Refrigerator

1 Answer

Cube size adjustment location on lg refrigerator


The icemaker requires a water pressure of 1.5 - 8.5kgf/cm2. It is acceptable if the water supply fills a cup of 180cc with water in 3 seconds. The icemaker produces small cubes if the water fed into it is not enough and lumped together if too much water is supplied. In order to obtain the desired size of ice cubes, the amount of water supplied to the ice maker needs to be adjusted. Adjust the valve supplying water to the icemaker or the unit in general in such a way that right amount of water fills the ice tray.

Oct 29, 2009 | ASUS Eee PC 900 Notebook

1 Answer

ICE MAKER NOT WORKING CORRECTLY


Hello deloreslovat
welcome,

You said ,your ice maker makes the ice but does not drop it into the bucket. It just leave it in the upright position in the ice maker device. It also seems to not be making all of the ice cubes only a portion of them.

Here are somethings to check that may cause this

The ice cubes are hollow or small
NOTE: This is an indication of low water pressure.
Water shutoff valve not fully open? Turn the water shutoff
valve fully open.
 Kink in the water source line? A kink in the line can reduce
water flow. Straighten the water source line.
 Reverse osmosis water filtration system connected to
your cold water supply? This can decrease water pressure.
See “Water Supply Requirements.”
 Questions remain regarding water pressure? Call a
licensed, qualified plumber.

Let me know if this helps.
Huuum



Oct 13, 2008 | Whirlpool GS6NBEXR Side by Side...

1 Answer

550 Ice Maker Making Hollow cubes or Small Cubes


Hollow cubes are usually a result of lack of water supply

Jul 12, 2008 | Sub-Zero Bottom Freezer Refrigerator

Not finding what you are looking for?
Samsung RS2630SH Side by Side Refrigerator Logo

588 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...