Manual missing in box

The service manual for your model is here. That and my video here will give you disassembly info.

More questions? Contact me directly here.*

* always include the full model number and FCC ID number from the label on / in your microwave

You probably mean Model# LMVM2055ST

You can get new installation hardware from Sears Parts Direct.

I think you are looking for the screws in item #4 on the following page...
http://www.searspartsdirect.com/partsdirect/part-model/LG-Parts/Microwave-Parts/Model-LMVM2055ST/3204/0123370/50030491/00007?adcell=Part2ModelLookup_ModelResultsPg_DiagramLink

Do you mean the Whirlpool Microwave Hood Combination GH4155XPQ0? Most Whirlpool appliance manuals are available here: https://www.whirlpool.com/webapp/wcs/stores/servlet/OCManualsLiteratureSearchView?catalogId=10561&langId=-1&storeId=10211&krypto=5QgxQhneFliXuEuX564wSQ%3D%3D&ddkey=http:OCManualsLiteratureSearchView . The direct link to the manual for the GH4155XPQ0 is https://www.whirlpool.com/digitalassets/MLPDF/Use%20and%20Care%20Guide%20-%208204919.pdf .

Sharp doesn't have a microwave with this model number. If you gave the incorrect model number but the correct manufacturer, please add a comment with the correct model number.

I hope this helps.

Cindy Wells

There should be a sticker in the back that quotes this. 40 Watt is the highest you may go but....buy the 130volt brands as this is a higher rating for 120volt and it will not burn out as quick. Make sure it is an appliance bulb. Most hardware stores like ACE have them. Big Walmarts do too but check the package.

Most likely the touch panel is bad. You can try ordering a new one from repairclinic.com by searching with your model number. If you find that replacing it doesn't help, return the panel within 30 days and you are only out the shipping costs. With what you describe, it should be the panel itself. Let me know what you find out.

Benjamin

I replaced outer door with key panel on my LG MICRO MODEL LMVM2055ST which solved my problem but when I went to put the handle back on it did not fit. The tophole in new panel for the handle is round and the old one is rectangle. LG says I have right part can not help me.A new handle comes rectangle shape. What now?

HI. this LCD is attached to the PWB assembly board. Unfortunately, this lcd is not sold separately and, you will need to replace the whole PWB assembly in order to fix this issue.This is actually a pwb(pcb) assembly failure.

CLICK HERE TO ORDER YOUR NEW PWB ASSEMBLY(LCD)

Can't help with part number as it's not an Australian Model, but refer to http://us.lgservice.com/index_b2c.jsp to help you find a service location!

Same issue here. LMVM1935 about 2 months past warranty keypad stopped working. Apparently they need to add something in the manual about not boiling water on the range over which the microwave is installed (gee who would have thought that there would be steam over the cooktop and we should seal the membrane?).

The silver traces on the keypad got corroded and no longer conduct. After complaining to Sears (NO HELP) and LG (EVEN MORE INEPT) and running on 30sec button for about 6 months, I found a replacement keypad $30 w/ shipping and didn't break anything taking the door apart, thanks to the parts list link above. Thanks Rickzilla!

Life's Good, Their Keypad SUCKS, or apparently we are the only people that boil water anymore.

You can download Samsung over the range microwave installation instructions here. If that's no good, try here.

Otherwise, visit this page, click on click on the left-side arrow "Busque por Codigo del Modelo" in the big purple rectangle, enter your model number in the box, then click "Buscar". They may list an English version manual available for download.

Good luck.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.