Question about Toshiba e-STUDIO 282 Black and White Copier
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
F103 indicates HDD transfer time-out.
U can try format the HDD (08-690).
Then u perform the bad sector check (08-694). *take long time
If the check result is OK, recover the data in the HDD. If
the check result is failed, replace the HDD.
* replacement of HDD require firmware update
Posted on Jul 02, 2009
C-430: Thermistor abnormality after abnormality judgment: Abnormality of the thermistor is detected after a specified period of time has passed from power-ON (including ready state).
You can try going into (08) mode by holding 0 and 8 while turning on the copier. Once the copier starts up key in 400 and press start, input "0" and press interrupt. Try rebooting the copier, if this doesn't clear that call for service then you are going to need to get work done on your fuser.
Posted on Aug 27, 2010
Tips for a great answer:
Mar 28, 2017 | Toshiba E-Studio 282 estudio 282
Mar 17, 2015 | Toshiba E-studio 282 Multifunction Copier
Nov 17, 2014 | Toshiba e-Studio 282 Printer
Jan 02, 2012 | Toshiba e-Studio 232 Black and White...
Feb 22, 2011 | Office Equipment & Supplies
Jul 02, 2009 | Toshiba e-STUDIO 282 Black and White...
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: