Question about Televison & Video

Open Question

Superscan tv LCD KSJ2520 getting picture but no sound

Cannot get sound on television. have dish hooked up, picture clear as day, absolutely no sound coming out of speakers on the television. appears to be a hookup issue as opposed to tv according to dish.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Kimi
  • 277 Answers

SOURCE: My Television Turns on, but there is no sound or picture, Is there a Resent Button?

There isn't any reset button. All you have to do is to take out the power source. Anyway, double check the wires... are you sure all are well connected?

Posted on Dec 20, 2005

nfandres
  • 168 Answers

SOURCE: High Pitch Sound From Samsung TXN3071WHF 30" TV

I think its the flyback and its starting to leak. this is a component responsible for the high voltage of your tv set. always observe safety in dealing with this. Have it check by a qualified technician. Good luck!

Posted on Feb 26, 2007

Nandakishore
  • 304 Answers

SOURCE: no sound

This might be configuration problem. Some TV Audio and AUX Ports we have to manually select from remote. Please check the configuration settings or else please refer the TV manual for Audio settings.
Hope soon you will rectify the problem.,
Bye...

Posted on Jun 04, 2008

  • 7 Answers

SOURCE: HD Hookup on Dish Network 2nd Location

In order for you to receive HD broadcasting you must have a HD-TV, otherwise you wont get the picture in HD. Also I should point out that you need to make sure that the signal itself is being broadcast in HD.

Posted on Jul 19, 2008

  • 10 Answers

SOURCE: How do I hook up my Dish Satelite to it?

should go from your satellite to dish box might say sat on bck of box then the next [connection think says tv that should go to tv itsself or dvd vcr whatever ur hooking up to it then from that point hook it to ur tv

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I get the sound to come through my T.V speakers?


You have to hook from the cable/dish box straight to the audio on the TV. That will get you audio out of the tv.

Dec 09, 2014 | Sony 32" 31.5" Diag Bravia Bx320 Series...

1 Answer

No sound on lg 37lc7d 37 in lcd hdtv


Apparently something else has failed on the circuit board(s).

Nov 10, 2013 | LG 37LC7D 37 in. LCD HDTV

1 Answer

Sled4668w tv scans channals but always shows 0 found hooked upto dish network


This Orion TV made by Sansui was bought by me two weeks ago. It didn't last a week. The sound was terrible, picture was great, and it wouldn't hook up to soundbar without hearing a long delay in sound (A/V or Digital output tried two). I contacted their customer support twice, they were awesome. Told me this model has know issues and said to just bring it back. I found another TV for same price ($399) and same size (46) but it's LCD not LED, better picture and great sound! It is Insignia don't remember the model #. Bought at Best Buy (their house brand).

Feb 22, 2013 | Televison & Video

1 Answer

Once the TV is turned on, the sound and picture disappears and replaced by a blank screen. If one turns it off again and on imediately the picture and sound returns. This may happen several times in a row,...


Could be ethier one the dish box or the tv itself have cold solders joints on the FBT-Flyback transformer.That the big black block of plastic with a red wire with a black cap hook to the CRT-(tv tube).Call ur tv Dish box customer service,get a replacement box.See, if this will solved ur tv problems.If not,than the tv must be taken aparts and must have tools like a soldering iron,a roll of solders,also must know basic soldering.Resolders all the coldsolders joints on the FBT for a better High voltages contact to the CRT-(tv tube).This problems,will be solved.

Dec 03, 2010 | Philips Magnavox 27MS343S 27" TV

1 Answer

Cannot get a clear picture with dish network I have a Clear picture when using DVD


Sometimes the input/channel for the DISH Network and the DVD are different, and if using the same for both, then you will get an unclear picture on one. If at TV1, the tv will need to be on channel 3 or 4, and possibly an input such as video 1 or 2. The DVD player may be on a different input, such as video 3, or even just on channel 3 only. If at TV2, the tv needs to on channel 60 or 73. When using the DVD, try putting the tv on channel 3 or 4, that is normally the channel that the tv needs to be on. Also, make sure that the DVD player is not on while you are trying to watch just the dish.

Becki Barned
DISH Network Customer Service

Dec 03, 2010 | Apex Digital LD4088 LCD TV

1 Answer

SOUND BUT NO PICTURE


The two long LCD inverter boards are dead.Replaced the 2 long inverter boards will get ur picture back.Tries websites like Shopjimmy.com,Ebay.com to buy the 2 long board LCD inverter boards for the replacement.

Jun 07, 2010 | RCA L42WD22 42 in. LCD Television

1 Answer

No picture just sound thru dish network


There are a few reasons that this could happen. The main reason would be that the tv is on the incorrect channel or input. You will want to make sure that if you are at TV1, the channel is on 3 or 4, and an input if needed, such as VIDEO 1 or 2. If at TV2, the channel needs to be on 60 or 73. Cabling is another reason this could be. You want to make sure that if you are at TV1, all cables going from the receiver to the TV are connected on the back of the receiver at the green TV1 location. For TV2, the cable needs to be connected to the HOME DISTRIBUTION output on the back of the receiver.


Becki Barned
DISH Network Customer Service

Jun 01, 2010 | LG 52LG50 52 in. LCD HDTV

1 Answer

I have a 42 inch Insignia plasma tv. I only hook


If you have the audio cables hook up correctly to where the video cable from DVD is connected to, it should be RED and WHITE wires for audio. Then go to on screen audio setup menu to see if the speakers is turn off in the menu. Also try hooking up the powered PC speakers to the AUDIO LINE out RCA jacks to see if you get the sound OK there.

Nov 03, 2009 | Insignia 15 in. Flat Panel LCD HDTV

1 Answer

No sound


Sometimess it is the dish receiver have you tried rebooting the dish receiver, hold down the power button on the dish receiver until the picture goes away then turn the button aloose then don't mess with it until the receiver reboots, then see if your audio returns.

Sep 03, 2009 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

Tv has sound but no picture.


If it works on DVD but not on your Dish, and when you connected it to another house it had the same problem then it sounds like your input connection is bad on the TV. That is if I am understanding this right. From what I am reading your Dish network is not showing a picture but the audio is working fine. The DVD player works fine on the TV though. Then you took the TV and hooked it to another dish system and it was the same problem. That sounds to me like you TV is having a problem, either that or the cables for your Dish network are bad. Try switching to a different input, like the one the DVD player is on and seeing if it works there. If not, then the cables are bad and you just need to replace the cables. If it does work though where the DVD was working before then your TV input is bad on that port you were hooked to before.

Let me know if you have any other questions and if this was helpful. If you need some more clarification let me know, I hope this is helpful. Good luck and have a good weekend. Get it fixed before the Super Bowl.

Jan 25, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5100 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...