Question about Winchester Safes Locks & Locksmithing

Open Question

Electronic lock on safe wont open the door

Changed the batteries, red light comes on, we hear a click and a buzz but the door remains locked

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
dmathwizard
  • 113 Answers

SOURCE: small floor safe Sentry Model 3877 electronic lock and key

This manual will answer both of your questions.
http://www.sentrysafe.com/pdfs/OwnersManuals/501664.pdf

Posted on Mar 05, 2008

Ad
brainyass
  • 242 Answers

SOURCE: The Door Handle Will Not Unlock!

Remove both sides of the handle and you should be able to slide the lock mechanism so the door opens.

Posted on Oct 23, 2008

  • 15 Answers

SOURCE: i have a master lock mini key safe with a code. i

You don't know the code or you aren't setting it correctly. If it is brand new, retry the default code.

Posted on Sep 05, 2009

  • 3600 Answers

SOURCE: Door locked on safe

Brian We can't give advise on the safe but you can call the manufacture of the safe and if you have registered it they will help you otherwise federal law requires a lock smith to identify you and your information and your ownership of the safe before they will unlock it for you. This is to protect you or the safe owner and the lock smith from being sued and losing his licence.. There should be a sticker on the safe with a 800 number for you to call to get help. But you must have registered it first. They may have a way to verify it some other way but am not sure.

Posted on Nov 22, 2009

loxmith
  • 21 Answers

SOURCE: Sentry Model 1610 Won't Open

Hi,
here is the customer service phone number for you. I am sure they will be able to help you. 800-828-1438

Posted on Jul 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the battery compartment in my ce electronical digital safe?


do you have a round lock pad. This model has 2 9 volt batteries under the key pad

http://bestbatterytips.com/change-replacement-batter/safes-with-electronic-locks-replacing-the-battery/

Lots of info here

  • How to open digital safe when battery is flat and key not ... www.youtube.com/watch?v=aqC9V7SDKdQ
    • BY KHTHHONL
    • 1 MIN
    • 417K VIEWS
    2012-11-09 · How to open a digital safe when the battery is flat and the ... How to open digital safe when battery is flat and ... How Secure Are Electronic Safe ...
  • Locked out of my Digital Safe [Archive] - PPRuNe Forums www.pprune.org/archive/index.php/t-357319.html PPRuNe Forums > Misc. Forums > Computer/Internet Issues & Troubleshooting > Locked out of my Digital Safe. ... CE (Chinese made) electronic security safe ... battery ...
  • LA GARD LG Basic digital electronic safe lock changing ... www.youtube.com/watch?v=M07EpfSmoAU
    • BY DEANSAFE
    • 3 MIN
    • 99K VIEWS
    2009-10-13 · For instructions on this and other electronic digital safe ... How to change the combination and battery on ... Basic digital electronic safe lock changing ...
  • User Manual for Safe EA25 Installation - Tayabally www.tayabally.com/digitalsafe/mannuals/Safe EA25 Installation... You should change the code as soon as possible after opening the ... BATTERY REPLACEMENT. This safe uses ... MAINTENANCE FOR KEY AND ELECTRONIC SAFE.
  • Elektronischer Digitaler Safe Electronic Digital Safe www.produktinfo.conrad.com/...799999/...DigitalerSafe_de_en_fr_nl.pdf · PDF file Electronic Digital Safe Version 12/08 ... (CE). Any usage other than ... Replace your batteries when both the red and green light illuminate. 1.
  • Instructions for an Electronic Digital Safe ' eHow www.ehow.com > Home > Home Safety > Home Safes Instructions for an Electronic Digital Safe By Shawn McClain eHow Contributor Pin Share ... Replace the used batteries with new ones. For most safes, ...


  • Apr 24, 2016 | Locks & Locksmithing

    1 Answer

    I can hear it click but it wont open with the key either.


    Auto Repair : Power Door Lock Troubleshooting - YouTube

    ? 1:52
    https://www.youtube.com/watch?v=wsqbE_ztTYw
    May 12, 2009 - Uploaded by ehowauto
    Hi i have a locked driver side door that will not open.when i lift the locking ... I press the power lock, and hear a sound but all four doors remain locked or unlocked ... Hey sorry for the botherbut I need help.my key button don't unlock or lock.the button inside the car doesn't work either to unlock or lock.so I'm ...

    Fixing A Car That Does Nothing When You Turn The Key ...

    ? 3:37
    https://www.youtube.com/watch?v=TSE0fOrujW0
    Aug 16, 2012 - Uploaded by Scotty Kilmer
    2005 Mustang wont start or crank from the key.. wont say nothing good battery ..... all I hear is clicking noise my radio and lights and everything comes on but it will not do nothing what couldthis be have I blown something?

    Jan 06, 2016 | Cars & Trucks

    2 Answers

    Manual for stramm digital electronic safe manual


    The Stramm safe we have is a small one that we use to store keys for our drivers. To change the combination, open the safe with the current combination. Sorry, can't help you if you don't know that. Inside the door is a plastic panel covering the batteries. Pinch the plastic catch at the top and open the panel. There is a small red button which you can press to change the combination. When you press it, you will hear a double beep. Enter your desired new combination. The trick is that the last digit must be either an "A" or a "B" which signals the end of your combination. For example, if you want your new combination to be 123456, you can't do that. The closest you can come is 123456A or 123456B. Hope this helps. Steve, Mbeya, Tanzania

    Apr 06, 2013 | Safe International Digital Electronic Safe...

    1 Answer

    How do i change my code on my safe? it is a S-25E i have keys but want 2 change the code


    Try this,

    NOTE: The safe needs to be upright and right side up or the locking mechanism
    won't work.
    ELECTRONIC SAFES
    To open an electronic safe the first time, press the following numbers/letters on the
    electronic keypad -159B. (These numbers are preset. You should change the code as soon
    as possible after opening the safe to insure proper security). After you have entered the
    factory set code, you will need to turn the knob on the faceplate to open the door. You will
    have 5 seconds to turn the knob before the locking mechanism is reactivated.
    ENTERING YOUR SECURITY CODE
    To enter your own security code you will need to follow the steps listed below:
    1. After opening the electronic safe (with the pre -set factory code of 159B) locate the
    small red button on the inside of the door near the hinge.
    2. Press the red button and then release it, you will hear a beep.
    DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT YOUR NEW
    SECURITY CODE HAS BEEN ENTERED CORRECTLY.
    3. With the door open, enter your own personal security code, which can be 3- 8 digits
    long, and confirm your new code by pressing the letter "B" on the electronic touch pad.
    Before you close the door, try the new security code to make sure the lock release the
    knob so you can turn it and retract the live action locking bolts.


    Good luck

    Thanks


    Apr 29, 2011 | Office Equipment & Supplies

    1 Answer

    Just put new batterys in safe . but safe will not stop bleeping what is the problem


    Please follow these steps
    Programming a user code
    There are two ways to program a user code.
    A 1. Press the Program key.
    2. Enter the Factory Code. The green LED remains ON
    while you enter the 5-digit user code of your choice.
    After 5 digits are entered the green LED turns OFF.
    (To enter a new User Code, repeat these steps.)
    B 1. Press the red button inside the safe. The lock will
    beep and the green LED will come on.
    2. Enter a 5-digit user code.
    (To enter a new User Code, repeat these steps.)
    Keep your new user code secure.
    For your records, please copy it here:
    ____ ____ ____ ____ ____
    Programming a password
    1. Press the Program key.
    2. Press it a second time.
    3. Enter your 5-digit User Code. The green LED remains ON.
    4. Enter the 5-digit Password of your choice (any combination
    except 00000.) After 5 digits are entered, the green LED
    turns OFF.
    (To enter a new Password, repeat these steps. To erase the
    Password, press Program twice, enter your User Code and then
    enter 00000.)

    Battery replacement
    Below When old batteries are removed for replacement, your Password will be voided; only Factory and User Codes will work. To
    reestablish your Password, follow the directions above under
    Programming a Password.
    Key override
    If your electronic lock fails or you do not have any codes
    available, you may use a key override to access this unit.
    1. Remove the battery cover, disconnect and remove the
    battery holder.
    2. Insert the skeleton key (second set of keys provided)
    into the key hole inside the opening for the battery.
    3. Turn the key to the right.
    4. Turn the four bit key to the right.
    5. Open the door.
    Signals
    Your electronic-lock safe communicates by means of several
    audio/visual signals.
    Red (Error) LED + three beeps indicates
    one of the following:
    1. You have pressed Program key out of sequence
    2. You have entered an invalid code or password.
    3. You have let 5 seconds or more elapse between key entries.
    Green (Proceed) LED + single beep occurs
    1. After entering each digit of Factory or User Code, or
    Password
    2. After pressing Clear key
    3. After pressing Program key
    Green LED only
    1. Comes on after you enter a valid code/password and
    remains lit during the 4-second period in which the safe
    can be opened.
    2. Comes ON in the Program User Code mode after you enter
    the Factory Code and remains lit until you have finished
    entering a 5-digit User Code.
    3. Comes ON in the Program Password mode after you have
    entered your User Code and remains ON until you have
    entered a 5-digit password.
    Yellow LED
    Indicates low battery and will typically not turn ON until
    battery has been in use approximately two years or longer.
    Your electronic lock automatically performs a low battery test
    during each lock use.
    If a �low battery� condition is detected the Yellow LED will
    come ON and remain ON during each subsequent lock
    operation. (The lock will continue to function in a Low Battery
    state, until battery failure.) The Yellow LED will turn OFF only
    after three consecutive Good Battery readings or after the low
    batteries are replaced. (Note: If the new batteries are installed
    in less than 60 seconds the Yellow LED may come ON and stay
    ON during the first lock operation before it returns to OFF.)
    NOTE: It is recommended you replace the batteries after two
    years, or when the yellow LED remains on.

    Jan 09, 2011 | Safe International Electronic Digital Safe...

    4 Answers

    How to unlock a cathedral electronic safe ea25


    After opening the electronic safe (with the pre-set factory code of 159B) locate the small red button on the
    inside of the door near the hinge.

    2. Press the red button and then release it, you will hear a beep. DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT YOUR NEW SECURITY CODE HAS BEEN ENTERED CORRECTLY.
    3. With the door open, enter your own personal security code, which can be 3- 8 digits long, and confirm your new code by pressing the letter “B” on the electronic touch pad. Before you close the door, try the new security code to make sure the lock release the knob so you can turn it and retract the live action locking bolts.
    If the code fails, go through steps 1-3 again. If the code works successfully, then you should lock the safe. When you open the safe in the future enter the security code you have set followed by the letter “B” and turn the knob.

    If the incorrect security code is entered 3 times you will have an automatic lockout for 20 seconds before you can try your code again. If the incorrect security code is entered 3 additional times there will be a 5- minute lockout before the code can be tried again.

    BATTERY REPLACEMENT
    This safe uses 4- AA batteries. Under normal use, batteries will last about 1 year. When the battery is low, a red light will come on warning you that the battery is low. To test the batteries, enter your security code. If the batteries are low the red light located in the middle of the top of the keypad will start to flash.

    To replace the batteries, open the safe door with your security code and turn the knob. Push the batteries cover plate, which is located on the back of the door, and replace the old batteries.

    YOU MUST PROGRAME YOUR SECURITY CODE AFTER YOU REPLACE THE BATTERIES. SEE STEPS 1- 3 UNDER “ENTERING YOUR SECURITY CODE”.
    TROUBLE KEY
    A “Trouble key” has been provided in case you forget or lose your security code. Remove the small central panel from the front of the faceplate. Insert the key and turn it counter clockwise. Then turn the knob on the door towards the right. This will manually open your safe. If you lose your key, you may purchase a replacement key by referencing the serial number located under the central panel by the lock.
    MAINTENANCE FOR KEY AND ELECTRONIC SAFE
    If the door of the safe starts to rub on the door frame, open the door per the instructions above. By the door hinges you will find a threaded stem. Use an Allen wrench to tighten the threaded stem. This will help realign the door and give you trouble free access to the contents of your safe.

    Nov 01, 2009 | Home Security

    2 Answers

    Gordon item#45891 digital safe, lost code the door is open


    there is red button on the inside of the door (hinge side) press this , then key in a new code

    Oct 07, 2009 | Safe International Digital Electronic Safe...

    6 Answers

    I forgot the safewell electronic code and didnt have the key


    NOTE: The safe needs to be upright and right side up or the locking mechanism
    won’t work.
    ELECTRONIC SAFES
    To open an electronic safe the first time, press the following numbers/letters on the
    electronic keypad –159B. (These numbers are preset. You should change the code as soon
    as possible after opening the safe to insure proper security). After you have entered the
    factory set code, you will need to turn the knob on the faceplate to open the door. You will
    have 5 seconds to turn the knob before the locking mechanism is reactivated.
    ENTERING YOUR SECURITY CODE
    To enter your own security code you will need to follow the steps listed below:
    1. After opening the electronic safe (with the pre -set factory code of 159B) locate the
    small red button on the inside of the door near the hinge.
    2. Press the red button and then release it, you will hear a beep.
    DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT YOUR NEW
    SECURITY CODE HAS BEEN ENTERED CORRECTLY.
    3. With the door open, enter your own personal security code, which can be 3- 8 digits
    long, and confirm your new code by pressing the letter “B” on the electronic touch pad.
    Before you close the door, try the new security code to make sure the lock release the
    knob so you can turn it and retract the live action locking bolts.

    If you can not get this open more then likely you will have to cut it open.. One last thing to try is to email safewell sales@safewellsafe.com
    \
    Good luck

    Sep 14, 2009 | Locks & Locksmithing

    3 Answers

    Nutool sf20 safe


    I need an instruction Manual for a Nutool sf20 safe

    Jul 15, 2009 | Computers & Internet

    11 Answers

    Sentry Model 1610 Won't Open


    Hello,

    I am a Safe Specialist i have been reading some of your problems and this should help there is no code if you have lost yours only the default code for the model 1610 the default code is: 77,22,09,11,64 try that if you havent changed it and with this problem with people not getting the handle open with the green light happening i suspect this is a issue with the lock mechanism i have had many of the same problems with people bringing them in when you get you safe open it and where the lock is put some lubricate on the lock regulary as the lock sticks and wont open if you havent done this then you cannot get it open see you local safe specialist and tell them what i have said and they may or may not be able to get your safe open i hope this has helped Rob Safe Specialist World.

    Mar 29, 2008 | Sentry Fireproof Safe

    Not finding what you are looking for?
    Locks & Locksmithing Logo

    Related Topics:

    120 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Winchester Safes Locks & Locksmithing Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    ray gallant

    Level 3 Expert

    44382 Answers

    Tom Chichester

    Level 3 Expert

    34789 Answers

    Are you a Winchester Safes Lock and Locksmithing Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...