Performa diagram pdet920ayw why my Performa Dryer model no. PDET920AYE won't heat but still work properly.

It is possible that the motor start/run capacitor has failed, rendering the motor unable to get going. The capacitor will look something like this

http://como-reparar.com/guides/tumble-dryer-turning-find-fault-replace-motor-capacitor/

This is a pretty simple dryer. Unplug it and pop the top then remove the front. The heater and limits are all mounted on the lower left hand side on the heating element.

While you is in there do a good cleanup and oil the rollers and idler. Use zoomspout oil.
Replace the belt if she looks worn out.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101

tust

It is in the back left corner behind the drum,inside the cabinet.

Flat side of the belt goes agaist the drum. The diagram is on the new belt

need an electrical diagram for a 2008 performa series

Go to this site for info on your dryer type, you may find what you need there...

http://www.applianceaid.com/ww-and-mc.html

Do not buy or use a maytag performa dryer model number pye2300ay at all. I fyou have one unplug it and take to the landfill or scrap yard. They are complete junk and nothing but a hassle. One problem after the other on this model no matter what you do. they are complete trash and a waste of your money.

i am having the exact same problem with this model as well just happened 4 days ago.