Question about Panasonic PT-47WX49 47" Rear Projection Television

Open Question

Panasonic cinema vision hdtv 10801

Double picture

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

SD Tech
  • 14553 Answers

SOURCE: panasonic hdtv 1080i all of the sudden has double

Go INTO the customer menu and select CONVERGENCE--what you are looking for is will blue or red not move in some direction?

If you find in your case blue OR red is wacked and will not adjust let me know--I can post here start to finish instructions for this repair on this set.....

You only need to be able to know how to solder and get at the chips--you can buy a pair of the chips on Ebay for less than 14 dollars plus shipping.

If you cannot do it yourself--let me know and I will give you options.

I am here to help people--if this information helps you rate this solution--I do this here for free.


Posted on Nov 03, 2009

Testimonial: "Quick feedback with helpful questions."

  • 57 Answers

SOURCE: We have blue lines or arches on the bottom and top

if you are handy with screw driver i suggest you remove all cd,dvd or anything you got on top of the unit and remove the back panel from this tv after you unplug the unit of course .first thing you want to do is clean your lenses most time dirt ,bugs,etc and other materials get logged on the lenses also make sure you dont spray directly any cleaning product on the lens make sure you spray a rag or some sort of cleaning towel.
after you finished doing this clean the front panel as well were screen is also clean the silver board thats in there as well.after you finish all of this replace all of the screws and boards back on and give it little while to dry off .turn it on see if u still have the lines if you do then your problem lies in the lenses they might be cracked.
if there not you might have bad electrode or power diode going bad.

Posted on Jan 09, 2010

  • 8617 Answers

SOURCE: My Panasonic cinema vision projection tv has lost

You can get the Convergence repair kit for your model at the kit contains the IC, Resistors and the CD with step by step repair instructions.

Posted on Jul 18, 2010

  • 8617 Answers

SOURCE: my panasonic cinema vision hdtv model # pt-47wx49

Does the power indicator blink? If so how many times does it blink?

Posted on Jul 29, 2010

SD Tech
  • 14553 Answers

SOURCE: My Panasonic cinema vision tv

Problem is called convergence; see attached photos.

This set uses 2 of the STK-392-110 convergence chips, both will have to be replaced and total parts cost on EBAY will be under 25 dollars.

The good news is I have start to finish step by step instructions for this repair in this set. They tell you everything you will need and exactly how to do it.

They are based on my experience doing this repair in hundreds of sets just like yours.

I will enclose also a photo of what the chips look like.

If you want the instructions let me know and we will find a way to get them to you for free.

If this information told you something you did not know, rate this solution as I do this here for free.




32facb4.jpgThis is a JVC board but it uses the exact same chips (black) that are in your set.

Posted on Aug 31, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Panasonic HDTV 10801 BBE TAU

Unplug it for a few seconds and
plug it back in if this doesn't
do it the call in a technician
may be HV or PWR Sply problem

Nov 29, 2007 | Panasonic CT-32HXC14 32" TV

1 Answer

Panasonic rear projection 52inch cinema vision 1080i hdtv looks 3D with double vision red, blue and green how do I fix

Replace the convergence chips--should be stk-392-110's in the Panasonic.

I have start to finish free instructions for this repair based on the model number----a email address will get them for free.

Jun 06, 2012 | Panasonic Televison & Video

1 Answer

Panasonic cinema vision tv picture is shadowed

thats a classic convergence issue. You can get the panasonic convergence repair kit for your model from which has the parts and the CD with repair instructions.

Oct 29, 2011 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

My Panasonic cinema vision projection tv has lost it's focus. It has "double vision". How can it be fixed?

You can get the Convergence repair kit for your model at the kit contains the IC, Resistors and the CD with step by step repair instructions.

Jul 18, 2010 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Panasonic cinema vision model pt47wxc43g has double image on bottom of the screen.

Sounds like Convergence Ic's are defective. The best advice would be to contact a Svc. Co.

Feb 24, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Help with my double vision

What model is your tv? Panasonics have a 'self-alignment' system in the menu, or a manual alignment that the menu will actually walk you through. Other System's will be able to do that also, such as Hitachi.

Aug 24, 2007 | Mitsubishi WD-52327 52" Rear Projection...

Not finding what you are looking for?
Panasonic PT-47WX49 47" Rear Projection Television Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts


Level 3 Expert

5484 Answers


Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75571 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides