Question about D-Link RangeBooster G DPR-1260 (DPR1260) Print Server

1 Answer

DPR-1260 with Epson CX6600 & Dymo Duo

Hi, Looking at buying a DPR-1260 (Have a Mac/Dell WiFi network on Netgear). Can anyone tell me if a Dell CX6600 works with the DPR-1260 (including the Front Card Slots - camera memory etc) and if it works with a Dymo LabelWriter Duo?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Contributor
  • 47 Answers
Re: DPR-1260 with Epson CX6600 & Dymo Duo

The DPR-1260 is pretty easy to configure and works well with my HP Laser 1012, HP Photosmart 8250, and HP OfficeJet 5610. The Operating System on the computer is what matters... as long as it's running Windows XP, Vista, or a server edition like Win2003, you should be fine. I can't speak to the Mac environment, as I don't have any experience there. As for the Dymo Duo, I can't tell you how well it'll work in this environment, but based on my experience with it and many other print servers that I've tried, I can't think of a better configuration to try. Personally, I would recommend the DPR-1260 to anyone... just make sure you follow the installation instructions in the users manual carefully, and you can't go wrong. I love mine, hopefully you'll enjoy yours as well.

Posted on Nov 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

D-Link DPR-1260 print server setup problem

Try admin for logon & password.
Sometimes it is user ......

Feb 01, 2010 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer


did you install the software that comes with the print server? if so, did you configure the software to recognize the printer?

Apr 30, 2009 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer

Router and New Print Server Not Talking?

what hardware version and firmware is on might need to update firmware depending on what firmware is on now.

Aug 15, 2008 | D-Link RangeBooster G DPR-1260 (DPR1260)...

3 Answers

Printer eventually loses connection...

Try to upgrade the firmware revision to the last one (1.21).
I had similar problem with the dpr-1260 firmware rev 1.00.
Now after the firmware upgrade the problem seems solved

Nov 06, 2007 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer

DPR 1260 will not work at all

I had the same problem earlier. Forget that I had MAC address filters setup. You might need to add your printer server's MAC. Then it should work. Mine did. Good luck

Nov 04, 2007 | D-Link RangeBooster G DPR-1260 (DPR1260)...

4 Answers

Epson photo 1400

seth, did u figure this out since last month? I am looking for the same, a print server that works with the epson 1400. is it too new on the market for any print server to know whether it works?

Oct 26, 2007 | D-Link RangeBooster G DPR-1260 (DPR1260)...

4 Answers

DPR-1260 ... prints but cannot access web config page

To get into the web configuration you need to know your firmware on the DPR-1260. If it is 1.12, us http://dlinkps-xxxxxx where the X's are the last 6 number of the mac address. If it is 1.20 and up, use http://dlink-xxxxxx, where the x's are the last 6 number of the mac address. If you do set it up as DHCP or static and know the ip address of the print server just type in the ip address of the print server on the address bar.

Oct 21, 2007 | D-Link RangeBooster G DPR-1260 (DPR1260)...

Not finding what you are looking for?
D-Link RangeBooster G  DPR-1260 (DPR1260) Print Server Logo

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Print Servers Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Martin Murray

Level 3 Expert

1614 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Are you a D-Link Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides