I was able to remove the screw from inside the chuck,but could not remove chuck...is it screwed on??? is it LH thread??? please help...george
Inside the chuck is a left-handed screw. torx (star) T20. When you get it out, take an allen wrench and (if you can tighten it up at all, tighten the **** out of it). If not, find an allen wrench, a tiny bit smaller than the space allowed. Now, get a nice big hammer. The chuck is right handed thread. And knock it, spinning the chuck off the spindle. May take a few whacks. Use the edge of a workbench to keep it stationery if need be. Please rate me
Testimonial: "Thank you very much. solved my problem last year or so...George"
1,468 views
Usually answered in minutes!
×