I need to set additional digits after the decimal point. It is now rounding up.

Ad

Shift (yellow) button and DISP (above close parenthesis).

N button.

Will show FIX _

Input required number of decimal places

That's it!

Posted on Jan 17, 2016

Ad

Hi,

A 6ya expert can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: I lost my decimal point

You need to be in add mode, and have 2 decimal places selected for the result.

To change to add mode, make sure the 'K . A' switch is in the 'A' position. To get 2 decimal places in the answer, move the selector in the 'F 6 3 2 1 0' switch to the '2' position.

You can see the above described at

this Sharp.com page which shows the users manual. The manual shows examples.

Posted on Mar 19, 2008

SOURCE: HP 12C calculator

turn the calc off then turn on holding down the decimal.

Posted on May 08, 2008

SOURCE: Display a decimal point

Turn the calculator off, then press and hold down the .(decimal key) while you press the on button. Doing so again sets the calculator to use the original digit separators in the display

Posted on Jun 27, 2007

SOURCE: I want two decimal points to show

I called Canon customer support. There is a tiny reset button on the lower back area of the calculator. Simply stick a small object in there to reset the calculator and you should be as good as new! Worked for me!

Posted on Sep 18, 2008

SOURCE: MS-80TV AUTOMATICALLY ROUNDS UP TO 1 DECIMAL DIGIT

The [MODE] key can be used to select the modes described below.

Important! The following is a general explanation of Scientific Calculator modes. Note that your calculator may not include all of the modes described here.

1) Calculation Modes

Before performing a calculation, you first need to select the appropriate calculation mode.

COMP: Basic arithmetric calculations

(arithmetic operations, trigonometric functions, etc.)

COMPLEX: Complex number calculations

SD: Single-variable statistical calculations

(sample standard deviation, etc.)

LR or REG: Paired-variable statistical calculations

(linear regression statistical calculations, etc.)

BASE or BASE-n: Binary, octal, decimal, hexadecimal number system calculations

MAT: Matrix calculations (determinants, etc.)

VCT: Vector calculations

EQU: nth degree equations, simultaneous equations

2) Display Settings

Use these settings to control how calculation results are displayed.

Note that changing the Fix and Sci settings does not affect internal calculation results.

Norm: Exponential display format and cancels the currently configured Fix and Sci settings.

Fix: Specifies a fixed number of digits to the right of the decimal place.

Sci: Specifies a fixed number of significant digits.

3) Angle Unit Setting

(90°=?/2 radians=100 grads)

Deg: Degrees

Rad: Radians

Gra: Grads

4) Engineering Mode

Use this mode when you want to input and perform calculations using engineering symbols.

Please rate this response . .

Posted on Sep 08, 2009

I don't know which particular calculator model you have, but for an HP-12C, the manual says the following:

**Digit Separators **

As a number is keyed in, each group of three digits to the left of the decimal point is automatically separated in the display. When the calculator is first turned on after coming from the factory - or after Continuous Memory is reset - the decimal point in displayed numbers is a dot, and the separator between each group of three digits is a comma. If you wish, you can set the calculator to display

a comma for the decimal point and a dot for the three-digit separator. To do so, turn the calculator off, then press and hold down the [.] key while you press [ON]. Doing so again sets the calculator to use the original digit separators in the display.

As a number is keyed in, each group of three digits to the left of the decimal point is automatically separated in the display. When the calculator is first turned on after coming from the factory - or after Continuous Memory is reset - the decimal point in displayed numbers is a dot, and the separator between each group of three digits is a comma. If you wish, you can set the calculator to display

a comma for the decimal point and a dot for the three-digit separator. To do so, turn the calculator off, then press and hold down the [.] key while you press [ON]. Doing so again sets the calculator to use the original digit separators in the display.

Oct 25, 2013 | HP Office Equipment & Supplies

Round to three digits after the decimal point, so this is 2.442 .

The first digit after the decimal point is the tenths, the second the hundredths, and the third the thousandths.

The first digit after the decimal point is the tenths, the second the hundredths, and the third the thousandths.

Apr 06, 2013 | Cars & Trucks

Dropr all decimal digits except the first one. Round if necessary. Here you round down. Result 4.3

Mar 10, 2012 | Office Equipment & Supplies

TI-5045 SV

ii

English.............................................................. 1

Fran?ais ............................................................ 6

Espa?ol ............................................................. 11

Portugu?s ........................................................... 16

Examples, exemples, ejemplos, exemplos .............................. 21

ILLUSTRATIONS Â¦ FIGURES Â¦ ILUSTRACIONESÂ¦ ILUSTRA??ES

Removable tab

Languette

Leng?eta extracci?n

Alavanca usada para o rolo

Ink roller

Rouleau encreur

Tamp?n de tinta

Cartucho de tinta

1

English

Your Texas Instruments calculator has a built-in printer for producing a permanent record printout of

your calculations with negative numbers printed in red. A big, easy-to-read display also enables you to

check entries or perform quick calculations without printing.

GETTING STARTED

OFF ON PRT IC GT

POWER

1. Connect the calculator to a proper power outlet (110-120V or 220-240V

where available).

2. The calculator is turned on by setting the POWER switch to the PRT

position.

Inserting the paper (see illustrations 1, 2, 3, and 4 on page ii).

1. Turn on the calculator.

2. Open the printer compartment cover by pressing down on its front edge and sliding it back in the

direction of the arrow.

3. Fit the roll of paper on the holder so that it unrolls from the bottom, with the loose end toward the

calculator.

4. Cut the end of the paper squarely and insert it firmly into the printer slot on the back of the

calculator.

5. Press & until the paper is in the printing position.

Replacing the ink roller (see illustrations 5 and 6 on page ii)

1. Turn the calculator off and tear off the excess paper.

2. Remove the printer cover by pressing down on both sides of the front edge and sliding back in the

direction of the arrow.

3. Remove the old ink roller by lifting it with the removal tab.

4. Insert the new ink roller into the compartment and press down gently until it snaps into place. Close

the printer compartment.

Note: The old ink rollers should not be refilled. Replacement rollers can be obtained from your local

retailer. The warranty does not cover ink roller replacement.

2

SELECTION SWITCH SETTINGS

OFF ON PRT IC GT

POWER ROUND

: 5/4 9 + F 0 2 3

DECIMAL

4

TAX

SET CALC

Set the POWER, ROUND, DECIMAL and TAX switches as required.

Note: The TAX switch is spring-loaded to return to CALC when it is moved to SET and released.

The switch settings are summarized in the following table:

SWITCH SETTING FUNCTION

POWER ON

PRT

IC

GT

No printout is provided; however, the display can be printed by pressing

4.

The printer provides a printout of your calculations but does not count them.

The printer is on and an item count of additions and subtractions to or from

the register is printed when sub-totaled or totaled.

The GT position controls whether or not the totals from the independent add

register are accumulated in the grand total register.

ROUND Rounds the result of a calculation to the selected number of decimal places.

:

5/4

9

Truncates the result to the selected number of decimal places.

Rounds the result up or down according to its value. For example, when the

DECIMAL switch is set to 2, the result is rounded up if the third decimal

position is 5 or more and rounded down if it is 4 or less.

Rounds the result up to the selected number of decimal places.

Ex. 220 P 6

Setup: PRINTER: PRT, ROUND: :

DECIMAL: 2, TAX: CALC

Ex. 220 P 6

Setup: PRINTER: PRT, ROUND: 5/4

DECIMAL: 2, TAX: CALC

Press Display Printout Press Display Printout

2 0. 0Â¦ C

220 ' 220. 220Â¦ P

6 3 36.66 6Â¦ =

36Â¦66 ?

2 0. 0Â¦ C

220 ' 220. 220Â¦ P

6 3 36.67 6Â¦ =

36Â¦67 ?

DECIMAL + Add mode: All results are given with two decimal places. For addition and

subtraction only, a decimal point is automatically placed to the left of the last

two digits entered, unless the number already includes a decimal point.

F Floating mode: Any results are displayed and printed with the maximum

number of decimal places.

0 2 3 4 Fixed decimal mode: Sets the number of decimals to 0, 2, 3, or 4.

3

TAX SET

CALC

Lets you enter a tax rate to perform tax calculations.

Stores the tax rate. Pressing ! or " after a tax rate has been entered,

adds/subtracts the stored tax rate to/from the value in the display.

Ex. VAT = 17.5 %

100 + VAT

Ex. VAT = 17.5 %

235 - VAT

Setup: PRINTER: PRT, DECIMAL: F, ROUND: 5/4, TAX: CALC

Move and hold the TAX switch to SET. Press 217 L 5 and release the TAX switch. It

automatically returns to CALC. 17.5% is printed.

Press Display Printout Press Display Printout

2 0. 0Â¦ C

100! 117.5 100Â¦

17Â¦5 @

117Â¦5 ?

2 0. 0Â¦ C

235" 200. 235Â¦

N35Â¦ @

200Â¦ ?

Note: The most common setup is POWER: PRT, ROUND: 5/4, DECIMAL: 2, TAX: CALC. Use these

positions for the examples unless other settings are given.

KEY DESCRIPTIONS

Basic keys

I Clear Entry: Clears an entry, enabling you to enter another number in its place. Note

that this key does not clear the add register.

2 Clear Key: Clears the add register, any pending operations, and the display. 0.C is

printed. Does not clear the memory.

( Right Shift: Deletes the right-most digit entered from an entry before an operation key is

pressed. Shifts the remaining digits one place to the right.

L Decimal Point: Enters a decimal point.

4 Date/Non-Add: Prints a date (such as 12Â¦10Â¦96) or a number for reference purposes.

Does not affect calculations. This entry is printed on the left side of the printout, the date

or number preceded by the # sign.

& Paper Advance: Advances the printing paper.

Addition and subtraction keys

9 Add: Adds a number to the add register. Displays the cumulated result.

: Subtotal: Gives the intermediate total from the add register. Using this key does not

affect the contents of the add register.

. Subtract: Subtracts a number from the add register. Displays the cumulated result.

E Total: Gives the total from the add register, and then clears the register.

4

Multiplication, division, percent and margin keys

? Multiply: Multiplies the number in the display by the next value entered.

' Divide: Divides the number in the display by the next value entered.

3 Equals: Completes any pending multiplication or division operation.

> Percent: Calculates percentages, ratios, add-ons (e.g. of VAT), or discounts.

# Gross Profit Margin: Calculates the selling price of an item when its cost and gross

profit (or loss) margin are known; also used to obtain a price excluding VAT.

Ex.

Cost: 594

Profit margin: 40%

Press:2 594 # 40 3

Answer:

Selling price: 990

Gross profit: 396

Ex.

Selling price including VAT: 252

VAT %: 20%

Press: 252 # 20 . 3

Answer:

Selling price excluding VAT: 210

VAT: 42

/ Grand Total: Gives the grand total of the operations previously performed and stored in the

Grand Total register. Every time a total is obtained with E it is cumulated into this register

(printout shows G+) which is only cleared when / is pressed twice. During long

calculations, if / is not used, this re

ii

English.............................................................. 1

Fran?ais ............................................................ 6

Espa?ol ............................................................. 11

Portugu?s ........................................................... 16

Examples, exemples, ejemplos, exemplos .............................. 21

ILLUSTRATIONS Â¦ FIGURES Â¦ ILUSTRACIONESÂ¦ ILUSTRA??ES

Removable tab

Languette

Leng?eta extracci?n

Alavanca usada para o rolo

Ink roller

Rouleau encreur

Tamp?n de tinta

Cartucho de tinta

1

English

Your Texas Instruments calculator has a built-in printer for producing a permanent record printout of

your calculations with negative numbers printed in red. A big, easy-to-read display also enables you to

check entries or perform quick calculations without printing.

GETTING STARTED

OFF ON PRT IC GT

POWER

1. Connect the calculator to a proper power outlet (110-120V or 220-240V

where available).

2. The calculator is turned on by setting the POWER switch to the PRT

position.

Inserting the paper (see illustrations 1, 2, 3, and 4 on page ii).

1. Turn on the calculator.

2. Open the printer compartment cover by pressing down on its front edge and sliding it back in the

direction of the arrow.

3. Fit the roll of paper on the holder so that it unrolls from the bottom, with the loose end toward the

calculator.

4. Cut the end of the paper squarely and insert it firmly into the printer slot on the back of the

calculator.

5. Press & until the paper is in the printing position.

Replacing the ink roller (see illustrations 5 and 6 on page ii)

1. Turn the calculator off and tear off the excess paper.

2. Remove the printer cover by pressing down on both sides of the front edge and sliding back in the

direction of the arrow.

3. Remove the old ink roller by lifting it with the removal tab.

4. Insert the new ink roller into the compartment and press down gently until it snaps into place. Close

the printer compartment.

Note: The old ink rollers should not be refilled. Replacement rollers can be obtained from your local

retailer. The warranty does not cover ink roller replacement.

2

SELECTION SWITCH SETTINGS

OFF ON PRT IC GT

POWER ROUND

: 5/4 9 + F 0 2 3

DECIMAL

4

TAX

SET CALC

Set the POWER, ROUND, DECIMAL and TAX switches as required.

Note: The TAX switch is spring-loaded to return to CALC when it is moved to SET and released.

The switch settings are summarized in the following table:

SWITCH SETTING FUNCTION

POWER ON

PRT

IC

GT

No printout is provided; however, the display can be printed by pressing

4.

The printer provides a printout of your calculations but does not count them.

The printer is on and an item count of additions and subtractions to or from

the register is printed when sub-totaled or totaled.

The GT position controls whether or not the totals from the independent add

register are accumulated in the grand total register.

ROUND Rounds the result of a calculation to the selected number of decimal places.

:

5/4

9

Truncates the result to the selected number of decimal places.

Rounds the result up or down according to its value. For example, when the

DECIMAL switch is set to 2, the result is rounded up if the third decimal

position is 5 or more and rounded down if it is 4 or less.

Rounds the result up to the selected number of decimal places.

Ex. 220 P 6

Setup: PRINTER: PRT, ROUND: :

DECIMAL: 2, TAX: CALC

Ex. 220 P 6

Setup: PRINTER: PRT, ROUND: 5/4

DECIMAL: 2, TAX: CALC

Press Display Printout Press Display Printout

2 0. 0Â¦ C

220 ' 220. 220Â¦ P

6 3 36.66 6Â¦ =

36Â¦66 ?

2 0. 0Â¦ C

220 ' 220. 220Â¦ P

6 3 36.67 6Â¦ =

36Â¦67 ?

DECIMAL + Add mode: All results are given with two decimal places. For addition and

subtraction only, a decimal point is automatically placed to the left of the last

two digits entered, unless the number already includes a decimal point.

F Floating mode: Any results are displayed and printed with the maximum

number of decimal places.

0 2 3 4 Fixed decimal mode: Sets the number of decimals to 0, 2, 3, or 4.

3

TAX SET

CALC

Lets you enter a tax rate to perform tax calculations.

Stores the tax rate. Pressing ! or " after a tax rate has been entered,

adds/subtracts the stored tax rate to/from the value in the display.

Ex. VAT = 17.5 %

100 + VAT

Ex. VAT = 17.5 %

235 - VAT

Setup: PRINTER: PRT, DECIMAL: F, ROUND: 5/4, TAX: CALC

Move and hold the TAX switch to SET. Press 217 L 5 and release the TAX switch. It

automatically returns to CALC. 17.5% is printed.

Press Display Printout Press Display Printout

2 0. 0Â¦ C

100! 117.5 100Â¦

17Â¦5 @

117Â¦5 ?

2 0. 0Â¦ C

235" 200. 235Â¦

N35Â¦ @

200Â¦ ?

Note: The most common setup is POWER: PRT, ROUND: 5/4, DECIMAL: 2, TAX: CALC. Use these

positions for the examples unless other settings are given.

KEY DESCRIPTIONS

Basic keys

I Clear Entry: Clears an entry, enabling you to enter another number in its place. Note

that this key does not clear the add register.

2 Clear Key: Clears the add register, any pending operations, and the display. 0.C is

printed. Does not clear the memory.

( Right Shift: Deletes the right-most digit entered from an entry before an operation key is

pressed. Shifts the remaining digits one place to the right.

L Decimal Point: Enters a decimal point.

4 Date/Non-Add: Prints a date (such as 12Â¦10Â¦96) or a number for reference purposes.

Does not affect calculations. This entry is printed on the left side of the printout, the date

or number preceded by the # sign.

& Paper Advance: Advances the printing paper.

Addition and subtraction keys

9 Add: Adds a number to the add register. Displays the cumulated result.

: Subtotal: Gives the intermediate total from the add register. Using this key does not

affect the contents of the add register.

. Subtract: Subtracts a number from the add register. Displays the cumulated result.

E Total: Gives the total from the add register, and then clears the register.

4

Multiplication, division, percent and margin keys

? Multiply: Multiplies the number in the display by the next value entered.

' Divide: Divides the number in the display by the next value entered.

3 Equals: Completes any pending multiplication or division operation.

> Percent: Calculates percentages, ratios, add-ons (e.g. of VAT), or discounts.

# Gross Profit Margin: Calculates the selling price of an item when its cost and gross

profit (or loss) margin are known; also used to obtain a price excluding VAT.

Ex.

Cost: 594

Profit margin: 40%

Press:2 594 # 40 3

Answer:

Selling price: 990

Gross profit: 396

Ex.

Selling price including VAT: 252

VAT %: 20%

Press: 252 # 20 . 3

Answer:

Selling price excluding VAT: 210

VAT: 42

/ Grand Total: Gives the grand total of the operations previously performed and stored in the

Grand Total register. Every time a total is obtained with E it is cumulated into this register

(printout shows G+) which is only cleared when / is pressed twice. During long

calculations, if / is not used, this re

Jan 16, 2011 | Office Equipment & Supplies

You have the calculator set to round everything in the display to zero digits after the decimal point. To change this, press SHIFT [DISP] and then a digit representing the number of digits you want to the right of the decimal point.

Nov 09, 2010 | HP 10bII Calculator

The function is called ROUND. It has 2 arguments, (1) the original number and (2) the number of decimal digits. Here is the Excel's help:
ROUND(number,num_digits)
The number you want to round.
• None.
num_digits The number of digits to which you want to round number.
• If num_digits is greater than 0 (zero), then number is rounded to the specified number of decimal places.
• If num_digits is 0, then number is rounded to the nearest integer.
• If num_digits is less than 0, then number is rounded to the left of the decimal point.

So for your case use this in a cell "=ROUND(12350*32.75%, 0)" without quotes, where I assume one or both numbers will come from other cells. -Ken

So for your case use this in a cell "=ROUND(12350*32.75%, 0)" without quotes, where I assume one or both numbers will come from other cells. -Ken

Aug 29, 2009 | Microsoft Office Excel 2007

Check this HP FAQ:

Setting a Fixed Decimal Place You can download the manual and user guides for your calculator from here:

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=81575&lang=en&

For more information, Faqs & how-Tosgo the HP support homepage for your calculator:

http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&dlc=en&cc=us&lang=en&product=81575&

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

Setting a Fixed Decimal Place You can download the manual and user guides for your calculator from here:

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=81575&lang=en&

For more information, Faqs & how-Tosgo the HP support homepage for your calculator:

http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&dlc=en&cc=us&lang=en&product=81575&

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

- Press and release .
- Press the number key for the desired number of decimal places to be displayed to the right of the decimal point (0 through 9). The calculator displays a maximum of 10 digits.

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

- Press and release .
- Press the number key for the desired number of decimal places to be displayed to the right of the decimal point (0 through 9). The calculator displays a maximum of 10 digits.

Aug 24, 2009 | HP 12c Calculator

I found this solution on the HP website. Turn it on, and do what it says. Then turn it off and back on again, and the extra decimal places should show.

http://h10025.www1.hp.com/ewfrf/wc/document?dlc=en&lc=en&cc=us&docname=bpia5183

- Press and release the gold PREFIX key (f).
- Press the number key for the desired number of decimal places (0 through 9).

Mar 25, 2009 | HP 12c Calculator

Hello,

Press [SETUP] select FIX then press [EXE]. Enter the number of decimal digits you want (3 or 4). Press [ESC] then press [EXE]

Hope it helps.

Press [SETUP] select FIX then press [EXE]. Enter the number of decimal digits you want (3 or 4). Press [ESC] then press [EXE]

Hope it helps.

Dec 14, 2008 | Casio FC-200V Scientific Calculator

Turn the calculator off, then press and hold down the .(decimal key) while you press the on button. Doing so again sets the calculator to use the original digit separators in the display

May 10, 2007 | HP 12c Calculator

129 people viewed this question

Usually answered in minutes!

×