Question about Uniden BC248CLT Base Scanner

Open Question

What is the freg. number for my scanner

I need the freg number to enter in my scanner

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get any frequencies to program


hi select a bank ,Press Hold. Then enter the channel number where you want to store a frequency, then press Func and Pgm. The channel number appears. 2. Use the number keys and to enter the frequency (including the decimal point) you want to store. 3. Press E to store the frequency into the channel. Notes: • If you entered an invalid frequency in Step 2, Error appears and the scanner beeps three times. Enter a valid frequency. • The scanner automatically rounds the entered number to the nearest valid frequency. For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475. • When you enter a frequency into a channel, the scanner automatically turns on the delay function and DLY appears. When delay is turned on, the scanner automatically pauses scanning

Mar 18, 2011 | Uniden BC72XLT Handheld Scanner

1 Answer

I need the freg to put in it how do I get them


http://www.cityfreq.com/

Go there, and choose your state, city, and organization you wish to monitor.

If this helps, rate me with 4 thumbs up! Thanks!

Feb 23, 2011 | Radio Shack Radio Communications

1 Answer

I have reset my uniden bc scanner and am trying to re porgram frequencies in i press hold, put in frequency number , press func. and then prgm. and it keeps telling me error. What could be wrong?


First, be sure that the frequency that you're trying to enter is withjin the scanner's tuning range. The ERROR message will appear if you enter an invalid frequency.

Second, follow this sequence to program a known frequency:
- Power the scanner ON.
- Press HOLD.
- Enter the number of the channel you wish to program.
- Press the Func and Pgm keys (channel number will display).
- Enter the frequency, including the decimal point.
- Press E to enter your information into the scanner's memory.

Need the owners manual for your scanner? You can download and print it, at no cost, here:
http://www.uniden.com/pdf/BC72XLTom.pdf

For a comprehensive database of active frequencies in your area, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Dec 08, 2010 | Uniden BC72XLT Handheld Scanner

1 Answer

I need to store my freg, how long can I store it


You should be able to store it for many years. I would put a box of baking soda opened inside to absorb any smells. Also maybe put a couple mothballs behind the rear acess cover to prevent mice from getting in thier and chewing up the wiring or insulation. Here is a link for removing the rear cover if needed. http://appliancehelponline.com/referbackpanel.html

Jul 16, 2010 | GE Refrigerators

1 Answer

I cannot figure out how to program my scanner to the fire frequency.


To program any known frequency into your BC72XLT, power the scanner ON, and then:

1. Press Hold. Then enter the channel number where you want to store a frequency, then press Func and Pgm. The channel number appears.
2. Use the number keys and to enter the frequency (including the decimal point) you want to store.
3. Press E to store the frequency into the channel.

Notes:
• If you entered an invalid frequency in Step 2, Error appears and the scanner beeps three times. Enter a valid frequency.
• The scanner automatically rounds the entered number to the nearest valid frequency. For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475.
• When you enter a frequency into a channel, the scanner automatically turns on the delay function and DLY appears. When delay is turned on, the scanner automatically pauses scanning 2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly.
• If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press then enter the correct frequency. To enter the frequency anyway, press E to
accept.

4. To program the next channel in sequence, press E then repeat Steps 2 and 3.

Need the full manual for your scanner? You can download/print it here:

http://uniden.com/pdf/BC72XLTom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning info, visit:

www.RadioReference.com

BillB


Jan 16, 2010 | Uniden BC72XLT Handheld Scanner

1 Answer

How do I program my Uniden BC72XLT race scanner?


1. Press HOLD. Then enter the channel number
where you want to store a frequency, then press
FUNC and PGM. The channel number appears.
2. Use the number keys and to enter the
frequency (including the decimal point) you want
to store.
3. Press E to store the frequency into the channel.
Notes:
• If you entered an invalid frequency in Step 2,
ERROR appears and the scanner beeps three
times. Enter a valid frequency.
• The scanner automatically rounds the entered
number to the nearest valid frequency.
For example, if you enter 151.473 (MHz), your
scanner accepts it as 151.475.

Need the manual for your scanner? You can download/print it here:

http://www.uniden.com/pdf/BC72XLTom.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Nov 02, 2009 | Uniden BC72XLT Handheld Scanner

1 Answer

BC72XLT


Here is the directions to store frequencies in your scanner:


Storing Known Frequencies
Into Channels

1. Press Hold. Then enter the channel number
where you want to store a frequency, then press
Func and Pgm. The channel number appears.
2. Use the number keys and to enter the
frequency (including the decimal point) you want
to store.
3. Press E to store the frequency into the channel.
Notes:
• If you entered an invalid frequency in Step 2,
Error appears and the scanner beeps three
times. Enter a valid frequency.
• The scanner automatically rounds the entered
number to the nearest valid frequency.
For example, if you enter 151.473 (MHz), your
scanner accepts it as 151.475.
• When you enter a frequency into a channel, the
scanner automatically turns on the delay
function and DLY appears. When delay is turned
on, the scanner automatically pauses scanning
Operation 2 seconds after the end of a transmission before
scanning proceeds to the next channel. To turn
the function off or on, press Func + Dly.
• If you enter a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was
duplicated. If you entered the frequency by mistake,
press then enter the correct frequency.
To enter the frequency anyway, press E to
accept.
4. To program the next channel in sequence, press
E then repeat Steps 2 and 3.

Dean
Rollin CBs

Feb 19, 2008 | Uniden BC72XLT Handheld Scanner

1 Answer

Police sanner freg


Radio Shack should be able
to supply frequency manuals

Nov 14, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Uniden BC248CLT Base Scanner Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Jason

Level 2 Expert

211 Answers

John
John

Level 2 Expert

509 Answers

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...