Question about Kenneth Cole Watches

Open Question

I need a battery and a strap for my kc1471 - Kenneth Cole Watches

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ebel 1911 stainless steel 18 k bezel strap broken, battery needs replaceing


Any jewelry store can replace the battery.
They can also sell you a new strap.
Anything else wrong with the watch??

Aug 29, 2011 | Watches

1 Answer

Can you change the battery in the chest strap for polar f6


There are two types of straps for Polar:

1) hard rubber/ solid - These can not have the battery changed.

2) soft strap with connector in middle - these you can change the battery.

If you have the soft strap, it will have a small hard around 3 inch long block that "snaps" onto the strap to connect it. These have a battery compartment. Turn it around and you will see the outline for the battery compartment. These are not always easy to open, and the batteries are a little harder to find. Take it into any watch repair and they should be able to pop a new battery in for you pretty easy.

There is a link on my tips and tricks page to get manuals for Polar products, the T-31 wearlink is the product we are talking about, it has the how to change the battery and battery type.

Jan 12, 2011 | Polar F6 Wrist Watch

2 Answers

Is it worth trying to replace battery of my heart rate monitor


You certainly have had good service out of the battery. It is best left to a watch repairer to replace the battery.

Feb 10, 2010 | Polar F4 Heart Rate Monitor Watch

1 Answer

What type of tool is need to replace the battery on a WR 50M sports watch? Also, can you use a DL 1616 battery in place of the CR 1616 battery? I'm not sure of the maker, but the watch has four buttons...


Just need a small phillips head screwdriver and a CR1616 battery.

Do you know how to toggle between am/pm and military time? If you do, please email me at fischermh at netzero.com

Jan 19, 2010 | Watches

1 Answer

New battery needed and fitted to a Polar heart rate monitor


This is really easy to do yourself. Get a CR1632 battery, unscrew the four screws on the back (dont tip the watch as there is a small spring in the watch), unclip the metal band holding in the old battery noting the way 'round the battery is in (minus side up), pop in new battery and push clip back down, when re-fitting the back make sure the spring mentioned earlier lines up with the white sticker with a hole in it on the inside of the watch back, screw down the back. After you have re done all your settings you may need to re-aquaint the watch with the strap, to do this put on the watch and strap, set the heart monitoring going, bring the watch up close to the 'Polar' logo on the chest strap until the time is displayed, should now be all set up.

Andy

Oct 28, 2009 | Polar F4 Heart Rate Monitor Watch

1 Answer

I changed the battery in my fossil watch and the cell strap got slightly bent and now the watch isnt working. Is there a certain part on the strap that needs to be touching either the battery or some other...


Generally if the watch has a cell strap then yes, it should be contacting the plate of the movement. Are you sure that you put it back the way it was? You should also be careful that the negative contact remains in a position to contact the bottom of the battery.

There are a few things that can go wrong with this battery change including the contacts and strap. You may have also scratched the coil and that would stop it from running. You will also not be able to reseal this watch and you chance it not being water resistant anymore and voiding your 12 year warranty. I suggest going to a watch maker/technician and asking them to take a look at your battery installation. Then ask them to change the rear seal and pressure test the watch to the water resistant rating on the watch. This particular model is rated to be a dive watch.

Sep 19, 2009 | Fossil AM3733 Wrist Watch

3 Answers

Polar CE0537


you need CR2032 lithium batteries. They can be found on amazon (pretty cheap). here Finally charging for our multi device world
click on the link and chose some (by price or vendor...) I hope this was helpful. cheers

Aug 20, 2009 | Polar A5 Wrist Watch

1 Answer

How to change battery in Casio wave ceptor4305


If there is no any screws holding that 'metal strap' then carefully check both ends of it. You will notice that the ends (or one end) are snaped over the little plastic hooks. Take pointed tweezers and push that end outwards (away from battery) and the contact (metal strap) will pop out.
After battery replacement, just push the contact back into place till it fixes.
If there are screws holding the contact, just undo them.
Be quick when replacing battery- you have 2 or 3 minutes to do that, otherwise all data will be lost and you will need to reset watch completely.

Dec 19, 2008 | Casio PRG-40T-7 Pathfinder

1 Answer

Fossil watch service centers in India


Need to change leather strap

Dec 12, 2007 | Watches

3 Answers

Triax CV10


Nike Triax CV10 - Successful HRM reset 7 November 2008
 
I had real problems too. Even after repeatedly following the known reset steps everyone else is posting up. Here’s how I got mine going, please forgive the mind bogglingly tedious detail…
 
First make sure you’re using new good quality batteries. I used Maxell’s, bought in 10’s from Hong Kong on ebay – no problem.
 
Second, and this is the ESSENTIAL bit…move right away from the computer and any other electromagnetic sources before carrying out the known reset…
 
Third, follow the known reset steps below, adjusted to what worked for me…
 
If you press all four buttons of your Nike HRM it will reset. Next time you go to "RUN" mode, it will show "HRM LINK" error. You will now need to "hard reset" the unit.
 
Nike made a late change to add a "hard reset" to the chest strap. To re-link (re-initialise) the watch you'll need to open the battery door on the chest strap, and use a paper clip (or the equivalent) to push the small gold button in the battery area. There should be a small sticker in the battery compartment that points to the reset button.
 
The re-initialisation steps for the Nike C10 and CV10 digital HRM's is:
 
(1) reset the watch
(2) open the battery door on the chest strap
(3) move the watch to RUN mode
(4) press the reset button in the chest strap battery area without removing the battery
 
Tip - I agree with the suggestion to use a pin or needle and definitely do it with the battery in the hrm.
Tip – Thumb holds battery to stop it from pinging out, other hand performs jiggle with pin until the link is made (it links straightaway if you jiggle it just right!)
 
(5) replace chest strap battery cover…and smile!

Nov 30, 2006 | Nike Triax CV10 Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenneth Cole Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

Are you a Kenneth Cole Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...