Question about GE Profile 30" Self-Cleaning Slide-In Electric Range - Black-on-Black

1 Answer

How to get bugs out of lighted temperature display in GE profile slide in Range

When I start cooking bugs appear under glass that displays temperature and controls for oven. How do we access this area? Also the panel stops working occasionally until we unplug and re plug the appliance. Might be the bugs causing this?

Posted by Anonymous on

  • paul89211
    paul89211 Jun 02, 2015

    I have this same problem! It's so unappetizing. Did you ever find a solution?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GE Master
  • 10,875 Answers

Pull the knobs off,there are nuts under the knobs,unscrew them and slide the panel off,underneath you should be able to get to it,remember,you heat food there and unplug it,dont spray bugspray on it,figure out where they are getting in and put boric acid in the way so they will drag it to their den and kill them,boric acid is better known as cockroach powder,but,it works on all bugs

Posted on Jun 02, 2015

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1891 Answers

SOURCE: GE spectra JBP66 electric oven that displays the F2

f 2 code states that oven has exccded 590 deg w/door in unlocked position or 990 f in locked . either the themp prop is bad or the relay in the EOC ( clock ) is welded closed . I would replace the prob first ( less expensive ) then the clock if needed .. **** ..

Posted on Dec 23, 2009

  • 61 Answers

SOURCE: ge profile full gas convection

when you determine the part i reccomend checking out www.appliancepartssolutions.com cheep parts!
Good luck

Posted on Jan 21, 2010

  • 61 Answers

SOURCE: Electric range displays bake probe

if you need a parts check out appliance parts solutions

Posted on Feb 10, 2010

wentlanv
  • 710 Answers

SOURCE: I have a GE Profile

Hi youngen007,

First, did you unplug the stove or turn off the circuit breaker at the panelboard in your home?

Slide the range out and take the screws out of the upper rear panel at the back of the stove. Then you should be able to remove it.

Hope this helps. If you still can't get it off, please reply back.

Thanks,

Handie Andie

Posted on Jun 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the specs (size, height, width etc) for the GE Spacemaker XL Model#JVM1631WB 004


Specs are:


Capacity

Oven Capacity (cu. ft.): 1.6

Features

Wattage (IEC-705 Test Procedure): 1000

Cooking System: CircuWave™ Plus

Power Levels: 10

Style: Over-The-Range

Clock: Plus AM/PM pad

Electronic Scrolling Digital Display: Yes

Electronic Touch Controls: Yes

Kitchen Timer/Timer (On/Off): No/Yes

Variable Scroll Speed: 5 speeds (sub-pad w/ AM/PM)

SmartControl System - Concurrent Programming: Yes

SmartControl System - Help Pad: Yes

Beverage (Convenience): Yes

Cook (Convenience): 9 Codes

Popcorn (Convenience): Yes

Reheat (Convenience): 6 codes

Add 30 Seconds: Instant-On

Child Lock: Yes

Cooking Complete Reminder: Yes

Defrost Type: Auto & Time

Delay Start: Yes

Display On/Off: sub-pad w/ zero

Express Cook: Instant-on 1-6

Reminder (24 hr): Yes

Time Cook: I & II

Time Preference: Control Enhancement (1/9)

Turntable: Glass

Turntable On/Off: Yes

Turntable Size (in.): 13-1/2

Cooktop Lighting: Bright/Night/Off

Night Light: Auto

Rack Type: Wire Oven Rack

Sound Volume Control: 4 levels

Easy Mount Installation: Yes

Exhaust Fan: 2-Speed

Appearance

Case Color: Black

Color Appearance: Stainless Steel

Door Color: Black/Stainless Steel

Handle: Designer-Style

Weight And Dimensions

Approximate Shipping Weight: 63 lb

Overall Depth: 15 5/8"

Overall Height: 16 3/16"

Overall Width: 29 7/8"

Cavity (W x H x D): 20 31/32" x 9 3/8" x 14 3/16"

Power/Ratings

Electrical Input - 120V Amperage: 15

Electrical Input - 120V Watts: 1480

Frequency (MHz): 2450

May 04, 2011 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

We have the ge profile xl44 spectra and the F2 message has appeared on the display and need to know what this means


An F2 error code means your Electronic Range Control (ERC) board is going out or has already gone oit.

We are GE factory authorized parts and service so please contact us at:
http://www.fixya.com/repair/d499389-accurate_appliance_repair_service
frm 7 AM until 9 PM CST Monday through Saturday for this part. We ship next day air to our customers and would love to get you cooking again asap.

We look forward to hearing back from you soon. Thanks, Ella

Nov 22, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Electronic control touch pad not working


This is your electronic control board that needs to be repalced on this unit. GE Profile is a great brand and it is easy to repair, also.

We provide part removal/installation instructions for our customers when you purchase your parts from us.We also ship parts overnight to assure that you get your oven repaired right away.

Please contact us at:
http://www.fixya.com/repair/d499389-accurate_appliance_repair_service
from 7 AM until 9 PM CST. We look forward to getting you cooking again soon.

Thanks, Ella

Nov 17, 2009 | GE Profile JGS968 Gas Kitchen Range

1 Answer

How do I set the oven to self clean


The oven door must be closed and all controls set correctly for the cycle to work properly. After a Clean Cycle You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap- filled scouring pad and rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle.
You cannot set the oven for cooking until
the oven is cool enough for the door to unlock.
While the oven is self-cleaning, you can
touch the TIMER/CLOCK pad to display the time of day.
To return to the clean
countdown, touch the COOKING TIME pad.
If the shelves become hard to slide,
apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Using the self-cleaning oven.

How to Delay the Start of Cleaning

Make sure the clock shows the correct time of day. If your model has a latch, latch the door. Touch the SELF CLEAN pad. Using the + or or the number pads, enter the desired clean time. Touch the DELAY START pad. The earliest start time you can set will appear in the display. Using the + or or the number pads, enter the time of day you want the clean cycle to start. Touch the START pad. On models without a door latch, the door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off. The oven shuts off automatically when the clean cycle is complete. When the LOCKED DOOR light is off, slide the latch handle to the left as far as it will go and open the door. If your range does not have a latch, the door will unlock automatically. n The words LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door or forget to latch the door on models with a latch. n To stop a clean cycle, touch the CLEAR/OFF pad. When the LOCKED DOOR light goes off indicating the oven has cooled below the locking temperature, unlatch the door (on models with a latch) and open the door.

Oct 17, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

I have a GE Spacemaker x1800 (jvm1870sf02) and I need to take the front display off (as there is a bug in it). How can I do this?


At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

If you have any trouble getting the grille off once the screws are removed, slide the hood vent grille to the left about 1/4", then then pull it forward.

On some models there are L-shaped clips that fit into a slot to hold bottom of the vent.


Then you can disconnect the keypad, shown in the attached photo.

40716d4.jpg

Then carefully remove the circuit board (the display is glass) and you can clean it.

Dampen a soft cloth (not a paper towel) with a non-ammonia cleaner and gently wipe off the back of the display window and the front of the display glass.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Aug 19, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

GE XL44 gas range, oven dial doesn't have "lite"?


Set the oven for the desired temperature. It will cycle on and off at that temperature.
It will lite automatically.

Feb 27, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Temperature control


sounds like a bad bake ignitor(uneven heat,long cook times, long preheat times, perhaps even gas smell while cooking)

Sep 29, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Preheating


Hi,
If your electric2_bing.gif oven is not heating then you probably have a bad heating element in your oven. This is not that hard to fix yourself...
Check out this tip that I wrote about the Oven not heating problem..

Oven Problems Electric2_bing.gif Oven is Heating Slowly or Poorly
http://www.fixya.com/support/r4511800-oven_problems_electric_oven_heating

heatman101

Jan 13, 2008 | GE Profile J2S968 Dual Fuel (Electric and...

1 Answer

GE monogram ZET3038 locked on Sabbath mode


How to Exit the Sabbath Feature
Touch the Clear/Off pad.
If the oven is cooking, wait for a random
delay period of approximately 30
seconds to 1 minute, until only ⊃ is
in the display.
Press and hold both the Bake and Broil
Hi/Lo pads, at the same time, until the
display shows SF.
Tap the Delay Start pad until
12 shdn or no shdn appears in the
display. 12 shdn indicates that the oven
will automatically turn off after 12
hours. no shdn indicates that the oven
will not automatically turn off.
Touch the Start pad.
NOTE: If a power outage occurred while
the oven was in Sabbath, the oven will
automatically turn off and stay off even when
the power returns. The oven control must
be reset.

Dec 02, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

F3 code--oven doesn't heat


Deirdre, F3 is a bad temperature sensor. This is the probe that is in the oven that monitors the temp. This is not a hard fix. Depending on who you call hopefully you can get it repaired for under a hundred dollars. If you do it yourself probably under 50.00 for the part...Catriver..post back.

Sep 29, 2006 | GE Profile J2B915 Dual Fuel (Electric and...

Not finding what you are looking for?
GE Profile 30" Self-Cleaning Slide-In Electric Range - Black-on-Black Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...