Question about Proview PL 566s 15" Flat Panel LCD Monitor

1 Answer

Proview The screen goes black after you turn on the tv but the sound stays

Posted by on

1 Answer

Re: proview

One or more of the Cold Cathode tubes that illuminate the lcd backlight may be bad. i have the 19" and it has 4 - 2mm X 400mm tubes (two at the top and two at the bottom). One of them quit so to test it out i temporarily replaced it with one from my pc and it started up fine. You can order from:
But ONLY if you have knowledge of electronics, patience, a steady hand, and fine screw driver set. (oh and latex gloves in a dust free environment.) You don't want to get the screen layers back together only to find some hairs or dust specks light up when you turn the lcd on!
btw: The tubes are as small as the ink tubes in a ball point pen and can snap very easily...

Posted on Oct 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My ProView 19" flat panel lcd monitor goes black 30 seconds after boot. If I turn it off and on it comes on and then goes off after 30 to 50 seconds? Can I fix this?

I askedd this last time but you did not answer. Is the monitor located in a well vented area? Sounds like the monitor has been in a area of poor circulation and has reached a point where it overheats very easily. Try putting a small fan behind it to see if it causes it to stay on longer.

Jan 01, 2010 | Proview PL926WBi 19" LCD Monitor

1 Answer

Proview Monitor PL926 Wbi The power indicator

Repair estimate will be according to problem.

Nov 13, 2009 | Proview PL926WBi 19" LCD Monitor

1 Answer

MY screen will stay on for 30 seconds, then goes black.

you Screen has a Soildation problem take it to near by electrition he will resolidate your screen and it will then work fine..

Aug 27, 2009 | Proview PL 566s 15" Flat Panel LCD Monitor

3 Answers

I have Monitor Proview PL916S 900P It turns on

spc12b, Have you tried the flashlight test yet? How old is this monitor? Your monitor has a 2 types of power supplys in it. A switch-mode-power-supply and an "INVERTER" supply. One or both of them could be having a problem. The inverter needs DC from the smps to change it into AC to light up the cold-cathode-fluorescent-tubes that are hung in back of the lcd panel. Let me know results of flashlight test. After screen goes black, hold light 1-2" from screen at different angles. Let me know if you still can see the win-desktop screen even though it is still dark.. Bye for now. louie12fix on fixya or lmistyrel

Aug 12, 2009 | Proview PL916S2 Monitor

2 Answers

Proview monitor won't keep the screen on

bzinbby1, Hi, I think I know what's wrong. In fact I already know what's wrong! But I want you to do one test to let me know how bad it really is! Here is the test. I want you to reconnect your Proview to an already fully booted "KNOWN GOOD" pc with WIN DESKTOP showing. Then and only then power up the Proview and hold a good, bright flashlight 2 inches from the lcd screen after the screen goes to BLACK! Even though the screen appears BLACK, can you still see the WIN Desktop if you hold the flashlight at different angles???? Get back to me with results of test. I will then tell you what options are open to you as a consumer whose screen is now dark and lifeless. I'm louie12fix on fixya or lmistyrel@

Apr 16, 2009 | Proview PL913B 19" Flat Panel LCD Monitor

2 Answers

Screen goes black

The video adapter board is what controls the monitor. If you are going to replace a board that would be the one.

Dec 27, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Proview 900T

hope this helped you , if you need more help just ask and i will assist you as best as possible


Oct 30, 2008 | Proview PL926WBi 19" LCD Monitor

3 Answers

LCD display Proview

If the screen is pinkish chances are the panel is defective.Should follow-up with Company Proview and do some correspondence.

May 23, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Proview 3200 HD TV

as you are using the ch3 , have you previously scanned and locked in all the channels for cable,

Apr 25, 2008 | Proview PL913S 19" Flat Panel LCD Monitor

Not finding what you are looking for?
Proview PL 566s 15" Flat Panel LCD Monitor Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Computer Monitors Experts

 Mike M
Mike M

Level 3 Expert

3320 Answers

Diego Zenizo
Diego Zenizo

Level 1 Expert

22 Answers

Brad Brown

Level 3 Expert

13362 Answers

Are you a Proview Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides