Question about Fujitsu SCALEOVIEW Computers & Internet
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
josexcruz, While you were busy replacing all the electrolytic filter capacitors did you think to closely examine all the other "LEADS" of the surface mount and through-hole components to make sure they ALL look bright and "mirror finished" ??? Try looking for solder joints that have thinner than hair circular thermal fractures around the solderd leads. May need inspection microscope (10x 15x) to see them. Also check the semiconductors package (body) for cracks or swelling due to thermal overstress. Let me know what you find!!! 12fixlouie
Posted on Mar 19, 2010
If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on: Basic LCD monitor and TV troubleshooting guide: Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Basic LCD monitor and TV troubleshooting guide:
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Posted on Dec 13, 2010
SOURCE: i have a fujitsu siemens
yes there is a solution... i have repaired nearly 10 monitors in my site .. the only problem is D 920 diode (S1b) and 3 capacitors behind were shorted ... replace them and the monitor works ..
Posted on Jan 08, 2013
Tips for a great answer:
Oct 13, 2012 | Fujitsu Siemens Premium Line P19-1 19" LCD...
Oct 05, 2010 | Fujitsu Siemens Premium Line P19-1 19" LCD...
Aug 10, 2010 | Fujitsu Siemens Premium Line P19-1 19" LCD...
Nov 23, 2009 | Fujitsu Siemens SCENIC P300 PC Desktop
Jul 07, 2009 | Fujitsu Siemens Computers & Internet
Jun 16, 2008 | Siemens Computers & Internet
Mar 21, 2008 | Computers & Internet
270 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: