Question about Radio Communications
Pairs with cell but not connecting
Depending on the cell phone, you will need to connect to the headset AFTER pairing. Pairing just lets the phone know that the headset exists. Connecting to the headset will allow actual use. What phone are you trying to connect it to?
Posted on Feb 12, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Turn headset off (panel 5).
2. Hold down the headset’s MFB until the red and blue lights
flash and you hear 2 rising tones, followed by 4 more tones.
Important: Wait for all tones and for both lights to flash. This
may take up to 15 sec. Release the MFB.
3. Follow the manufacturer’s instructions for putting your
cellular phone into Bluetooth discovery mode.
4. Wait 5-15 sec. while the devices discover each other.
When the phone discovers the headset, select “Pair” and
enter a passcode of 0000 when instructed. When pairing
is complete the headset’s blue light will stop flashing and
the phone will prompt you to ‘connect’ to the headset.
Enter “Yes” on the phone to connect to the headset. When
connected, the blue light will flash indicating that the
headset is in standby mode ready to receive a call.
Posted on Jan 03, 2010
try this: have both on but not in use,plug the charger in for 10 secs only then unplug, watch lites go from red to blue then flashing just blue at a rate of 1x per second. that resets it. worked for me.i called the company
Posted on Aug 15, 2010
SOURCE: lost the instructions to my
A trip over to VXI's website and you'll find instructions on setting up the headset.
Posted on Jul 06, 2011
Clear your headset out of your phone then repair it to your phone. You do thieving by clearing it from your phone then turn your phone off for about 30 sec then turn it back on and then clear your hradset by holding down both the volume up &down bottoms on the headset for 5-6 seconds you will heat a double beep. Them you are ready to repair it.
Posted on Oct 31, 2011
Tips for a great answer:
Aug 01, 2012 | Parrot Blue B250xt Bluetooth Wireless...
Jan 08, 2012 | VXI Corporation Blueparrott B250-XT...
Aug 28, 2011 | VXI Corporation Blueparrott B250-XT...
Aug 27, 2011 | VXI Corporation Blueparrott B250-XT...
Aug 07, 2011 | VXI Corporation Blueparrott B250-XT...
Jul 06, 2011 | VXI Corporation Blueparrott B250-XT...
Jul 01, 2011 | VXI Corporation Blueparrott B250-XT...
Jan 03, 2010 | VXI Corporation Blueparrott B250-XT...
204 people viewed this question
Usually answered in minutes!