- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Kenmore HE2 Plus Front Load Washer Keeps unlocking ...
www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
flashing prewash and add garment lights My HE2 Plus will fill with water, but when ...Kenmore HE3 2plus wont finish cycle Washer wont finish the last1 minute of cycle. ...We ran a load twice and it still did not unlock. du is the code for cannot ... Why does the door keep unlocking and locking in between the drum rotating?
? 5:51
https://www.youtube.com/watch?v=oBihToN6dxs
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your Admiral Top Load Washer that has these following symptoms: Not Completing all Cycles ...
sounds like the door lock mechanism. if this cannot signal it has engaged, to the board, no other function will work (you don't want the washer going with the door open, trust me :) )
Hi The light is
flashing due to the door lock error. The door lock is activated as the machine
experienced an error or was stopped in middle of a cycle. Or the door was being
pulled while the machine was running a cycle. Try unplugging your washer and
restart the washer to check if you are still getting the same blinking light.
If error is still not resolved then start the rinse/spin cycle & stop
the cycle, now press and hold the cancel button for 5-10 seconds. However,
if you are still not able to get the door open then you'll need to open the
door manually by disassembling the washer. Hope this helps... Please post back
for any further assistance. Daniel
×