Kitchenaid KFIS20XVMS control pad

How to Reset a KitchenAid KUD101FLSS6 Dishwasher Control Lock

1. Place your finger on the "Energy Saver Dry" touch-sensitive pad on your KitchenAid KUDI01FLSS6 Dishwasher's control panel.
2. Hold your finger in place for at least four seconds until the Control Lock light turns off.

Try unplugging ribbon from control board to touchpad. If that doesn’t help, touch pad is probably bad.

Bad cold control sounds like. Try unplugging from a while n plugging it back in

Press and hold the Start pad for 5 seconds until "Control Lock" appears on the display. Repeat to unlock, and "Control Lock" will disappear from the display.

dsd Sorry to read about your problem, I hope this helps you out.
you have a keypad issue

1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

Hello and sorry to hear about your problem. The code you have given, will have this problem. I suggest you contact a service person.
F2-E5 - Cancel Key Line Open - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the 'cancel' function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

I have tried to help you. Please help me by Vote/Rate the response. Thanks and good luck

F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!@@

F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!@#$