Question about Toshiba Office Equipment & Supplies

1 Answer

Firmware version 370

Whin i Firmware Update my toshiba e-studio350 it all so update only 1 mode. 2-6 it no displayed how can i doing *2. UI Update UI1 Version xxxx *3. System Firmware Update SYS Version xxxx *4. NIC Firmware Update NIC Version xxxx *5. Scanner Firmware Update SCN Version xxxx *6. Machine Firmware Update total please answer me.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 783 Answers

I have searched all over Toshiba and different websites and it is not there. However it does look there they did release one some time ago. I think you will have to call Toshiba Tech Support Directly and ask them to either send you the disk with the Firmware or Upgrade It for you or maybe they could ever e-mail you the firmware. Here is there number.
Toshiba:- 1-855-383-7237

Posted on Feb 11, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fixxerss
  • 61 Answers

SOURCE: firmware update

refer to the cd or service manual maybe theres a link the can help you on updating firmware!

Posted on Feb 10, 2009

  • 10 Answers

SOURCE: Toshiba e studio 351c need firmaware

It depends what the copier is doing, is it giving error codes
one of the main faults on the copier is it dumps colour toner and that causes problems
need more info

Posted on Jul 02, 2009

  • 3 Answers

SOURCE: HP Color Laserjet 2600n Color Alignment

I own a HP 2600n and I had the same problem the way I fixed it was hold both arrow buttons in the turned off the power for 10 seconds while holding the buttons in then turned it back on then released after 3seconds the reset my defaults this cured my problems

Posted on Nov 12, 2009

MacD7
  • 67 Answers

SOURCE: firmware update

Unfortunately, Oki does not make their firmware available on the web -- except to Oki authorized dealer/service centers. You will have to either pay for it (I would not), or find a dealer who will do it for you. Of course, you could always sell it on ebay, and buy an hp. All of their firmware updates are free and open to anyone. They even come with instructions on how to do it!

Posted on Apr 25, 2010

  • 567 Answers

SOURCE: Dell 3130cn gone down with repeating 016-370 Error...

This type of error code implies that you need to restart the printer again. However, do check to see if toner cartridges are seated in the proper position. Also ensure that they have been locked in. This is an error commonly associated with the Dell 3100cn laser printer. Please let me know the results.

Posted on Jun 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi tv led zn32z6000 firmware please ???


Most smart TV update their firmware online when on the internet.
There is no file as such to download and apply from outside.

On my LG smart TV it is
Settings > ? > Software Update > Check Update Version
It displays if there is an update available or
it displays the current version and
I can also checkmark Automatic update mode
UPDATING YOUR FIRMWARE

Sep 08, 2016 | Televison & Video

1 Answer

Toshiba estudio 282 code F100


After replace new hdd, u need to performs following:

Update of HDD program data and UI data.

1) Create partitions. (In case of using the download jig, this is not necessary.)
While pressing [3] and [CLEAR] button, turn the power ON.
When "Firmware Version Up Mode" appears on the LCD, key in [3] and press the [START]
button.

2) Format the HDD. (Setting Mode (08-690: 2))

3) Update with the download jig or USB storage.

4) Format the HDD. (Setting Mode (08-690: 2))
* When the FAX unit (GD-1150) is installed.
Start up with the FAX Clearing Mode (1*)
Perform the 1*-100 (FAX Set Up), 1*-102 (Clearing the image data) of the FAX Clearing Mode.

Feb 25, 2013 | Toshiba e-STUDIO 282 Black and White...

1 Answer

Canon IPF8000..... i need to override the "ink


Before removing the used print head, be sure to update the printer?s firmware version with the included CD-ROM. An error message will be displayed on the printer?s display when the new print head is installed without updating the version. In this case, re-install the used print head and update the firmware version.

Updating the firmware

1. Turn on the power of the printer. Check that the printer is online.

2. Run the file setup.exe in the FirmUpdate folder in the CD-ROM. [GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from Programs in the Start menu.

4. By following the instructions, update the firmware version.



1. Turn on the power of the printer. Check that the printer is online.

2. Select the OS89 folder in the FirmUpdate folder in the CD-ROM, and run [GARO FirmUpdate]. [GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from [Applications] - [GARO Firmware Update Tool] folder.

4. By following the instructions, update the firmware version.



1. Turn on the power of the printer. Check that the printer is online.

2. Select the OSX folder in the FirmUpdate folder in the CD-ROM, and run [GARO FirmUpdate].

[GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from [Applications] - [GARO Firmware Update Tool] folder.
4. By following the instructions, update the firmware version.
Precautions when updating the firmware version
- Use [GARO Firmware Update Tool] after checking that the printer is online.
- Do not turn off the power of the printer while firmware data is being transferred.
- If the printer?s firmware is already the most recent version, the Status of the target printer will be displayed as ?Update Finished? when using [GARO Firmware Update Tool].

Techbelkin

Dec 13, 2010 | Canon imagePROGRAF iPF8000 Printer

1 Answer

Tried to print using my MFC-685CW. Was told that my ink cartridge was empty. Put in a new cartridge (LC51BK). Was told that the cartridge container was now empty. What to do?


STEP 1: Verify the firmware version of your Brother machine:

 

a. Press the OK key 2 times.

 

b. Press the UP ARROW (+) key 5 times.

 

c. Press the OK key 2 times.

 

The firmware version will be displayed on the LCD.

 

- If the firmware version is 1.01 or 1.02, go to STEP 2: Update the firmware of your Brother machine.

 

- If the firmware version is 1.08 or above, go to STEP 4: Toner usage and yields.

 

 

STEP 2: Update the firmware of your Brother machine:

 

A firmware update tool is available that will allow you to update your Brother machine with the most recent version firmware by downloading updates over the Internet. The updated firmware will assist in optimizing toner usage.

 

The Brother printer driver must be installed and working properly prior to the update of the Brother machine. The firmware update tool also requires that you have Java installed on your computer. The firmware update tool will not work if Java is not installed. If you do not have Java installed or are not sure if it is installed on your computer, you may download Java from http://www.java.com.

 

To update the firmware, follow the instructions listed below:

 

DO NOT interrupt the process or turn off the machine once the update has begun. Doing so may corrupt the memory on the machine and may require the machine to be serviced in order to correct the issue.

 

1. Open an Internet web browser and go to http://welcome.solutions.brother.com

 

2. Select your country and language.

 

3. Type in the model of your machine or select it from the appropriate section (Ex: HL3070CW in the Color Printer section).

 

4. Select Downloads.

 

5. Select your OS and language for step 1 and 2 on the web site. Click the Search button.

 

6. The Firmware Update Tool will be listed at the bottom of the web page. Click Information & Download.

 

7. Click the Download button and I Accept if you accept the license agreement.

 

8. A dialog box appears with options for Run, Save, or Cancel. Select Run. You may also download the firmware update tool for later use by selecting Save.

 

Nov 01, 2010 | Brother MFC-685cw InkJet Printer

1 Answer

How can i install my blue tooth on the system


In the user guide about KDC-MP242 - Owners Manual (page 12) check the ICON to procedure (compatibility list):

Checking the Firmware Version
1 Select the STANDBY
Press the [SRC] button.
Select the "STANDBY" display.

2 Enter Menu mode
C-1:Press the [FNC] button.Turn the Control knob to select "MENU", and then press the Control knob.
C-2:Press the [MENU] button for at least 1 second.
"MENU" is displayed.

3 Select Bluetooth Firmware update
C-1: Turn the Control knob to select "BT F/W Update", and then press the Control knob for at least 1 second.
C-2: Press the [FM+] or [AM-] button to select "BT FW UP", and then press the [AUD] knob for at least 1 second.
The firmware version appears.

4 Exit Bluetooth Firmware update mode
C-1:Press the [FNC] button.
C-2:Press the [MENU] button.


Hope this helps.

Sep 30, 2010 | Kenwood KDC-MP242

1 Answer

Help !!!! Firmware updates scx 4521f


FLASH UPGRADE There are methods to update the Flash. (1) Local Machine • RCP (Remote Control Panel) mode This method is for Parallel Port or USB Port. Connect the PC and activate the RCP (Remote Control Panel) to upgrade the Firmware. < Method > How to Update Firmware using RCP 1. Connect PC and Printer with a Parallel Cable or a USB Cable. 2. Run the RCP utility and select Firmware Update. 3. Search for the Firmware file to be used to update the set using the Browse Icon. 4. Click the Update icon. The firmware file is transmitted to the Printer automatically and the printer is initialized when the download completes. 5. Click the Refresh icon and check that the updated version numbers are displayed.

Aug 19, 2010 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

NO LCD DISPLAY


1- Remove the battery from the Harmony Remote for 10 seconds and insert it back in, and test the remote to see if the screen is displayed properly. If this does not fix the issue, please proceed with the following steps.

2- Make sure you have the latest Logitech Harmony Software (version 7.6.0) installed on your computer.

3- Connect your Harmony Remote to the computer. Run the Logitech Harmony Remote software on the computer and Login to your account.

4- Click on the "Downloads" button at the top and select "Firmware"

5- Remote will go through the firmware update, which will put the Harmony Remote back to Factory Default with the most updated firmware. Then software will ask you to select "Yes" to update the remote and click on "Next" to do a remote update, which will take the information on your account with your Devices and Activities and bring them into the Harmony Remote.

6- If this Firmware Update process does not fix the LCD screen issue, try doing a Firmware Update in "Safe Mode". To do this; remove the battery from the remote, press and hold the "Off" button on the top of the Harmony Remote and insert the battery back in to the Harmony Remote. Screen will display "Safe Mode" and then please follow the steps 3 through 5 again.

Jan 09, 2010 | Logitech Harmony 670 LCD Remote Control

2 Answers

No USB mode in Settings menu c250


Updating firmware video
http://www.youtube.com/watch?v=kVLoG4FWEjc

Jan 22, 2009 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

What steps to take after installing a hard drive on a toshiba 350


After replace new hdd, u need to performs following:

Update of HDD program data and UI data.

1) Create partitions. (In case of using the download jig, this is not necessary.)
While pressing [3] and [CLEAR] button, turn the power ON.
When "Firmware Version Up Mode" appears on the LCD, key in [3] and press the [START]
button.

2) Format the HDD. (Setting Mode (08-690: 2))

3) Update with the download jig or USB storage.

4) Format the HDD. (Setting Mode (08-690: 2))
* When the FAX unit (GD-1150) is installed.
Start up with the FAX Clearing Mode (1*)
Perform the 1*-100 (FAX Set Up), 1*-102 (Clearing the image data) of the FAX Clearing Mode.

Nov 26, 2008 | Toshiba e-Studio 350 Copier

1 Answer

Harmony


1- Remove the battery from the Harmony Remote for 10 seconds and insert it back in, and test the remote to see if the screen is displayed properly. If this does not fix the issue, please proceed with the following steps.
2- Make sure you have the latest Logitech Harmony Software (version 7.6.0) installed on your computer.
3- Connect your Harmony Remote to the computer. Run the Logitech Harmony Remote software on the computer and Login to your account.
4- Click on the "Downloads" button at the top and select "Firmware"
5- Remote will go through the firmware update, which will put the Harmony Remote back to Factory Default with the most updated firmware. Then software will ask you to select "Yes" to update the remote and click on "Next" to do a remote update, which will take the information on your account with your Devices and Activities and bring them into the Harmony Remote.
6- If this Firmware Update process does not fix the LCD screen issue, try doing a Firmware Update in "Safe Mode". To do this; remove the battery from the remote, press and hold the "Off" button on the top of the Harmony Remote and insert the battery back in to the Harmony Remote. Screen will display "Safe Mode" and then please follow the steps 3 through 5 again.

Jan 05, 2008 | Logitech Harmony 1000 LCD Touchscreen...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

628 Answers

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

102 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...