Question about Juki DDL-8700

1 Answer

I have a juki 8700-7 and error 007 can you help me

I have juki 8700-7 and error 007 can you help me

Posted by on

  • carlos espinosa
    carlos espinosa Feb 11, 2014

    Hi carlos espinosa, I want to help you with your problem, but I need more information from you. Can yo
    u please add details in the comment box?
    i have the SC-910-A

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Juki Expert
  • 176 Answers

HI THERE
PLEASE SEE NEXT;
Overload of motor • When the machine head is locked. • Check whether the thread has been
entangled in the motor pulley.
• When sewing extra-heavy material beyond • Check the motor output connector (4P)
the guarantee of the machine head. for loose connection and disconnection.
• When the motor does not run.
• Motor or driver is broken. • Check whether there is any holdup when
turning the motor by hand.
BEST REGARDS
ASHRAF ABOZID
CAIRO - EGYPT
aabozid@hotmail,com

Posted on Feb 13, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: I have an error code

hi there
may i know control model ? any way E811 means :
1- over voltage when voltage higher than guaranteed one is inputted ( please check wheter the applied power voltage is higher than te rated voltag ( plus ) 10% or more.

2 - Check whether 110V/220V changeover switch is improperly set.

3 - if 400 volt is input means POWER P.C.B is broken maybe repair or need to change.

best regards

ashraf abozid

aaboid@hotmail.com

Posted on Dec 03, 2010

SOURCE: my Juki 8700-7 top thread

hi there
please check timing cam for thread trimmer, need to re adjust again - check tension disk is open during trim or still close ( if closed always please check some parts missing from tension ) - check wire between tension and solenoid trimmer correct or no movement.
best regards
ASHRAF ABOZID
CAIRO - EGYPT

Posted on Apr 24, 2011

SOURCE: how solve Juki DDL 8700 automatic single needle

achraf_.ijouiher@hotmail.com

Posted on Jun 15, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a juki ddl 8700 machine all of a sudden it stop working. Every thing is locked and is not moving at all. What should I do? Please help.


Answer to 8700 locked up. I had a Juki 8700 do this. I was the needle bar it overheated and expanded. About 25 for new needle bar. Also increase the oil to the needle bar.

Jul 04, 2015 | Juki Sewing Machines

1 Answer

Hi, i've an error on my Juki DDL-8700-7 trhat read Err-11.


Dear Maciej
good day to you
regarding error E11 please see attached photo.
best regards
ASHRAF ABOZID
CAIRO - EGYPT
aabozid@hotmail.com

25188417-uue1p1sj3v0yjji4ot02kw11-4-0.jpg

Oct 06, 2014 | Juki DDL-8700-7 Industrial Straight Stitch...

1 Answer

Stitching loose


hi i have a juki 8700-7 whit computer CS-910-a and it showing
error 007 as sun i turn the machine on tarth bepeng like bip bip bip
can you please help me

Dec 31, 2013 | Juki DDL-8700

1 Answer

How to set up DDL8700 for free motion stitching i.e. Tension, stitch length etc.


i need help with my juki 8700-7 computer cs 910a
error 007

Dec 29, 2013 | Juki DDL-8700

2 Answers

My Prolem .DDL 9000a Err-71 & Err-007 I went Solutions


hello there
first please tell me the model of control box? is that error appear emmdiatlty when turn power ON? please email me at ( aabozid@hotmail.com ) i will try to do the best to resolve this problem.
best regards
ashraf abozid

Oct 20, 2011 | Juki DDL-8700

2 Answers

SC-810 ERROR E071


hi there
concern ERROR ( E071 ) means Disconnection o motor output connector.
please check the motor output connector for loose connection and disconnection. otherways means IPM module is defective.
if you need more help please contact me.
BEST REGARDS
ASHRAF ABOZID
aabozid@hotmail.com

Dec 24, 2010 | Juki DDL-8700

Not finding what you are looking for?
Juki DDL-8700 Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Pete Alaniz

Level 1 Expert

13 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...