Question about Craig CMP741d Tablet

Open Question

Xtreme generation 2 android tablet just says android on screen when turned on

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
scamper_69
  • 11 Answers

SOURCE: Android tablet stays in Android screen

Try to do a hard reset on the tablet. Since you cannot get to the menu options, you are going to have to do it through external keys. Here is how to do a hard reset using the external keys:


1. Turn tablet off. You may need to use two hands in this process to press and hold buttons properly.
2. Turn on the tablet with power button, wait a full 2 seconds from the time the tablet starts showing the manufacturer logo, then press and hold the down Volume key. (you should not hold down the power button after it turns on and logo appears)
3. "Android Recovery" will appear on top of screen if timing is done correctly. Release volume button. (if you continue to press volume down at that message, the message will cycle through "RSD, Fastboot, and back to Android Recovery. Make sure message states Android Recovery before you go to next step). If stuck at a RSD protocol or Fast boot screen, reboot the tablet by holding power button then pressing the volume up)
4. While screen states "Android Recovery", Press volume up button, the screen will say "Entering Android recovery mode" and a few seconds later an Android robot graphic will appear alone on the screen. Release buttons
5. Hold down power button and then press the volume up key together to see the Android Recovery screen menu selections
6. Use the volume buttons to move up and down through selection in this menu
7. Using the volume down button, scroll down to "Wipe data/factory reset"
8. Tap Power hard key to select option
9. Scroll down to select "Yes, delete all user data"
10. Tap the power button to select. Wiping and formatting data will take a few minutes.
11. You will return back to the Android recovery screen menu.
12. Tap the Power button to "Reboot system now" which will power-cycle tablet and eventually power back on to the Initial Set-up / Welcome screen present when you first turned on your tablet.

Posted on Feb 27, 2013

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How long do the screen turn on after I reset it


Cannot get Wopad to turn on sometimes ' Android Tablet Forum

www.androidtablets.net > ... > Rockchip RK2818 Tablets

Dec 28, 2010 - 11 posts - ‎9 authors
It would do this in seconds. the screen would just turn black, like it does when you tap the .... Hi do you know hw to reset the wopad and how to eliminate this *process ...Now I can always turn it on, even after a long standby.


reset nabi 2 tablet if pattern lock forgotten? - Android Forums at ...

forums.androidcentral.com/...tablets/248800-reset-nabi-2-tablet-if-patter...

Jan 31, 2013 - 9 posts - ‎8 authors
How do you factory reset the nabi tablet 2? My child put ... Turn off your Nabi (To turnoff Press and hold the Power button for 3 seconds) then tap OK 2. Press the ... From your screen press the Volume ? (Low/Down) then the Volume + (Up) button. 5. Press the .... These Before & After Couple Photos Just M..

Dec 25, 2015 | Easy Wopad 7 inch Google Android 2.1...

1 Answer

Get rid of dead robot


try clearing your cache partition, you can get to the android recovery with your buttons.
1. Turn tablet off. You may need to use two hands in this process to press and hold buttons properly.


2. Turn on the tablet with power button, wait a full 2 seconds from the time the tablet starts showing the red Motorola logo, then press and hold the down Volume key. (you should not hold down the power button after it turns on and logo appears)


3. "Android Recovery" will appear on top of screen if timing is done correctly. Release volume button. (if you continue to press volume down at that message, the message will cycle through "RSD, Fastboot, and back to Android Recovery. Make sure message states Android Recovery before you go to next step). If stuck at a RSD protocol or Fast boot screen, reboot the tablet by holding power button then pressing the volume up).


4. While screen states "Android Recovery", Press volume up button, the screen will say "Entering Android recovery mode" and a few seconds later an Android robot graphic will appear alone on the screen. Release buttons.


5. Hold down power button and then press the volume up key together to see the Android Recovery screen menu selections.


6. Use the volume buttons to move up and down through selection in this menu.


7. Using the volume down button, scroll down to "Wipe data/factory reset"


8. Tap Power hard key to select option.


9. Scroll down to select "Yes, delete all user data".


10. Tap the power button to select. Wiping and formatting data will take a few minutes.


11. You will return back to the Android recovery screen menu.


12. Tap the Power button to "Reboot system now" which will power-cycle tablet and eventually power back on to the Initial Set-up / Welcome screen present when you first turned on your tablet.

Jan 21, 2015 | Tablets & eReaders

1 Answer

Xtreme tablet 7c 4.0 froze and will not turn off. What is the solution to this problem?


Remove the battery and leave it out for a while. It will reset when batter is installed again.

Nov 15, 2014 | Tablets & eReaders

1 Answer

I've had several issues but the one now is that all my tablet will do is show a pic of an android laying down with a red triangle on it bearing an exclamation mark. At the bottom of the screen it says NO...


1. Turn tablet off. You may need to use two hands in this process to press and hold buttons properly.


2. Turn on the tablet with power button, wait a full 2 seconds from the time the tablet starts showing the red Motorola logo, then press and hold the down Volume key. (you should not hold down the power button after it turns on and logo appears)


3. "Android Recovery" will appear on top of screen if timing is done correctly. Release volume button. (if you continue to press volume down at that message, the message will cycle through "RSD, Fastboot, and back to Android Recovery. Make sure message states Android Recovery before you go to next step). If stuck at a RSD protocol or Fast boot screen, reboot the tablet by holding power button then pressing the volume up).


4. While screen states "Android Recovery", Press volume up button, the screen will say "Entering Android recovery mode" and a few seconds later an Android robot graphic will appear alone on the screen. Release buttons.


5. Hold down power button and then press the volume up key together to see the Android Recovery screen menu selections.


6. Use the volume buttons to move up and down through selection in this menu.


7. Using the volume down button, scroll down to "Wipe data/factory reset"


8. Tap Power hard key to select option.


9. Scroll down to select "Yes, delete all user data".


10. Tap the power button to select. Wiping and formatting data will take a few minutes.


11. You will return back to the Android recovery screen menu.


12. Tap the Power button to "Reboot system now" which will power-cycle tablet and eventually power back on to the Initial Set-up / Welcome screen present when you first turned on your tablet.

Oct 29, 2014 | Tablets & eReaders

1 Answer

Nabi jr has a green android laying on it's back with red exclamation make, want do anything. How do I fix it?


1. Turn tablet off. You may need to use two hands in this process to press and hold buttons properly.


2. Turn on the tablet with power button, wait a full 2 seconds from the time the tablet starts showing the red Motorola logo, then press and hold the down Volume key. (you should not hold down the power button after it turns on and logo appears)


3. "Android Recovery" will appear on top of screen if timing is done correctly. Release volume button. (if you continue to press volume down at that message, the message will cycle through "RSD, Fastboot, and back to Android Recovery. Make sure message states Android Recovery before you go to next step). If stuck at a RSD protocol or Fast boot screen, reboot the tablet by holding power button then pressing the volume up).


4. While screen states "Android Recovery", Press volume up button, the screen will say "Entering Android recovery mode" and a few seconds later an Android robot graphic will appear alone on the screen. Release buttons.


5. Hold down power button and then press the volume up key together to see the Android Recovery screen menu selections.


6. Use the volume buttons to move up and down through selection in this menu.


7. Using the volume down button, scroll down to "Wipe data/factory reset"


8. Tap Power hard key to select option.


9. Scroll down to select "Yes, delete all user data".


10. Tap the power button to select. Wiping and formatting data will take a few minutes.


11. You will return back to the Android recovery screen menu.


12. Tap the Power button to "Reboot system now" which will power-cycle tablet and eventually power back on to the Initial Set-up / Welcome screen present when you first turned on your tablet

Oct 27, 2014 | Tablets & eReaders

1 Answer

I do not have internet connection on my Xtreme generation 2 tablet.


Hope so u hvnt any cellular data connetion in ur tab.if its da reson dn u hv to use wifi .

Jun 18, 2014 | Tablets & eReaders

1 Answer

I forgot my lock screen password to my xtreme tablet what do i do


If it is running android, you can usually just enter your password 5 times incorrectly and a "Forgot Password?" button should appear. If it's symbian or windows then you probably have to just factory reset the device.

Dec 08, 2013 | Nokia Tablets & eReaders

Not finding what you are looking for?
Craig CMP741d Tablet Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craig Tablets & eReaders Experts

Lawrence Oravetz

Level 3 Expert

9771 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Craig Tablet and eReader Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...