HP OfficeJet 6110 All-In-One InkJet Printer Logo

Related Topics:

A
Anonymous Posted on Feb 10, 2014

My HP Officejet 4500 says alignment failed. It will still print but makes a loud banging noise as the cartrdges move before printing.

5 Related Answers

myob247

Georgia B

  • 1342 Answers
  • Posted on Jun 07, 2008

SOURCE: makes noise

Click HERE for HP troubleshooting for your printer.

Ad

Anonymous

  • 121 Answers
  • Posted on Apr 03, 2009

SOURCE: hp officejet 6110

If machine does not print the colors it cannot align. Try changing the color and try again

Anonymous

  • 1 Answer
  • Posted on Jun 11, 2009

SOURCE: black ink not coming through

I had the same problem. Ended up replacing the black/yellow "printhead" and that corrected the problem.

Anonymous

  • 103 Answers
  • Posted on Jul 26, 2010

SOURCE: hp 4280 gear noise - loud clattering sound for a

Hardware failure,Go for a new unit.

Anonymous

  • 78 Answers
  • Posted on Sep 30, 2010

SOURCE: My HP Officejet 4500 keeps

Try removing the cartridges, closing the printer, and disconnect the power. Let sit for at least 10 minutes, then hook up the power, wait until it stops making noises, the reinstall the cartridges, black first, then color, and if the alignment comes up again, press cancel. This should remove the error.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to set print alignment in hp officejet K7100

Hi,
During cartridge alignment, the error message 'Print cartridge alignment failed' displays on the printer control panel....
More Info visit this links...
Print cartridge alignment failed Error Message Displays on the All in...
Alignment Page Does Not Print

Thanks,
HP Printer Support
0helpful
1answer

Officejet 4500 desktop printing slow

This page provides some solutions for slow printing for that Officejet Printer.

Slow Printing HP Officejet 4500 Desktop All in One Printer G510a HP...

I am an HP employee.
0helpful
1answer

Loud clicking noise on my hp printer 4500

hi, your priner complaint i 2 chance 1 is the carrage cable is damaged or 2 is printer mechanism complaint please verifing
0helpful
1answer

My officejet 4500 is making a horrible noise when it warms up

Where was the pen stuck? All the gears in that printer are plastic and therefore are subject to shearing off or stripping.
0helpful
2answers

I have HP laserjet 1018 printer and it makes noisy sound when it prints. But it prints fine though. What causes making this noise?

The noise is probably due to the print heads aligning and clicking. To try to make this noise a little quieter, clean and align the print heads.
Good luck!
3helpful
1answer

How do I change the ink in hp officejet 5510

Replacing the print cartridges
  1. Turn on the HP Officejet, and lift open the print-carriage access door. The print carriage will move into the access area. Figure 1: Opening the print-carriage access doorc00034766.jpg
  2. After the carriage stops moving, push down on the top of the print cartridge to release it, and then pull it toward you out of the slot. Figure 2: Removing the print cartridgec00034767.jpg NOTE: It is normal to see ink buildup in the print cartridge slots.
  3. Remove the new print cartridge from the packaging and gently remove the plastic tape by using the pink pull tab. CAUTION: Do not touch the copper contacts or ink nozzles. Install the cartridge immediately upon removing the tape to prevent ink from drying in the nozzles. Figure 3: Removing the plastic tapec00034768.jpg
  4. Push the new print cartridge into the appropriate slot at a slight angle, until it clicks into place. CAUTION: Do not attempt to push the cartridge straight into the slot. It must slide in at a slight angle. Figure 4: Inserting the print cartridgec00034769.jpg
  5. Close the print-carriage access door.
Back to top Aligning the print cartridges The HP Officejet will prompt you to align the print cartridges every time you install a new print cartridge to assure high-quality output.
  1. When the message displays, press OK . The HP Officejet will print an alignment page.
  2. Place the alignment page face down on the left front corner of the glass with the top of the page facing the left side.
  3. Press OK . The HP Officejet will align the print cartridges and display Alignment Complete .
3helpful
2answers

Black ink not coming through

I had the same problem. Ended up replacing the black/yellow "printhead" and that corrected the problem.
0helpful
1answer

Makes noise

Click HERE for HP troubleshooting for your printer.
6helpful
1answer

HP Officejet 5510 - Replacing Ink Cartridge

this should work for all 5500 hp printers i hope this helps you out richard from chicago i just noticed you have the wrong cartage you need hp 57 color that will make all the difference :-) HP Officejet 5500 series All-in-One model Black cartridge Color cartridge HP Officejet 5505 HP 56 HP 57 HP Officejet 5508 HP 56 HP 57 HP Officejet 5515 HP 56 HP 57 HP Officejet 5510, HP Officejet 5510xi, HP Officejet 5510v HP 56 HP 57 HP Officejet 5600 series Replacing the print cartridges
  1. Turn on the HP Officejet, and lift open the print-carriage access door. The print carriage will move into the access area. Figure 1: Opening the print-carriage access door c00034766.jpg
  2. After the carriage stops moving, push down on the top of the print cartridge to release it, and then pull it toward you out of the slot. Figure 2: Removing the print cartridge c00034767.jpg NOTE: It is normal to see ink buildup in the print cartridge slots.
  3. Remove the new print cartridge from the packaging and gently remove the plastic tape by using the pink pull tab. CAUTION: Do not touch the copper contacts or ink nozzles. Install the cartridge immediately upon removing the tape to prevent ink from drying in the nozzles. Figure 3: Removing the plastic tape c00034768.jpg
  4. Push the new print cartridge into the appropriate slot at a slight angle, until it clicks into place. CAUTION: Do not attempt to push the cartridge straight into the slot. It must slide in at a slight angle. Figure 4: Inserting the print cartridge c00034769.jpg
  5. Close the print-carriage access door.
Aligning the print cartridges The HP Officejet will prompt you to align the print cartridges every time you install a new print cartridge to assure high-quality output.
  1. When the message displays, press OK . The HP Officejet will print an alignment page.
  2. Place the alignment page face down on the left front corner of the glass with the top of the page facing the left side.
  3. Press OK . The HP Officejet will align the print cartridges and display Alignment Complete .
Not finding what you are looking for?

43 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...