Question about Gestetner DSm635 Copier

Open Question

Dsm635 gives error and not open cover is no cover open

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT DO I DO WITH THE ERROR CODE SC405


on that machine check the development charge connect on the development unit or the the in side of the machine

Jun 10, 2014 | Gestetner DSm635 Copier

1 Answer

Canon MP830 printer giving error message "inner


If the inner cover is open when starting normal printing,close it before pressing [OK] on the machine.Do not open or close the inner cover when printing.This may damage the machine.

Jun 02, 2011 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Our Gestetner DSM635 jams every time we try to staple copies. Researching this issue, I saw that we need to initialize the staples by going into the Tools screen. However, when I try to do this, that...


hold the power button for 15 sec. for a system reset. Try to remove each panel that opens and check for broken pieces of paper Recycle the system by reinstalling the software once again. If you getting error codes then follow this We need to clear out these error codes stored in your printer NVRAM or memory! Shut down the printer and pc associated with it. Remove data cable and reinstall the software for this printer, press and hold the power button on the printer for 15 seconds, then reconnect the printer after software installation is successful. This process will clear the error codes that you keep receiving

Jan 26, 2011 | Gestetner DSm635 Copier

1 Answer

I have problem model ricoh aficio 3235 error sc326


you proplem with laser unit sychro2 not detected try to clean mirrors inside laser and be carful if it's not work out change it and go to programmes and put 2-109 and 2-108

Jan 09, 2011 | Gestetner DSm635 Copier

2 Answers

Error Code 7 blinks for awhile then locks on error 7


HERE is the service guide for your printer. the error code you mentioned says to call Kodak support and gives no other info.

Jan 07, 2011 | Kodak i40 Path-Through Scanner

1 Answer

How to install gestetner DSM 635 staples


open finsher and yo will find like knob pull it yo will find wth our languge lokcha this expression refer to stapler

Jan 04, 2011 | Gestetner DSm635 Copier

2 Answers

Error sc 326 in dsm 635


First of all check that the laser **** glass is still there, I've seen a couple of machines where the **** glass has been missing completely and it's been throwing up laser SCs. Remove the laser unit. Clean all the toner and dust out of it. Clean the synch sensor very carefully. If codes continue replace the LD unit. They tend to fail on these machines due to excess dusting

May 04, 2010 | Gestetner DSm635 Copier

2 Answers

How to Network the scan function of a Gestetner DSm635


The only real problem would be finding the software driver for your machine.When your driver for your scan function is loaded it will assign an IP address for the scanner.without the software,your out of luck.I'll look online tonight for it and let you know if I find it.

Mar 10, 2008 | Gestetner DSm635 Copier

1 Answer

Canon iP 3300 printer service error 6502


CANON PIXMA IX IP 4000 - error 5100 and error 6502

While testing the printer the cover must be closed!
So if you have a CISS in your printer you have to close the cover after replacinq cartridge because after that
replacinq the printer is testinq the cartridges also with the blinkinq LEDS which are installed on the ink's!
There is a light LED sensor under the cover which detects the blinking.
So if you have destroyed the LED on chips or if you covered them with glue OR if you will leave the cover opened
and press cover-open detection button with a pen (then the day ambient light will come inside to cover)
you will get an error 6502 or error 5100. I think that the same error will come with all printers which use
CLI8 CLI-8 cartridges.
Remebre that the blinking led have to be clean and blink after installing new cartidge.

Other reason is that you mixed the chips ang give i.e. chip from yellow to blue and blue to i.e.red. and black to yello etc etc. (YOU MIXED THEM :) )
I hope it will help

Nov 24, 2007 | OEM Systems PIXMA iP3300 Photo Printer

Not finding what you are looking for?
Gestetner DSm635 Copier Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gestetner Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1297 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Gestetner Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...