Question about Dell Optiplex 790 Desktop G620 4 Gb 250 Gb Win 7 X32
When i press the power button it start by orange color. then it display the orange color on the power button not start at all.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It sounds to me like you motherboard has failed and will not allow the hard drive or any other drive to engage. Just in case you find it helpful, I have included a link to the Dell support site for the optiplex CX270.
You may want to consider getting another system if that computer is any more than a few years old. The system boards are fairly expensive to replace. I would have an experienced technician do some testing to be certain. I want to remind you that this is only an educated guess based on your problem description.
I hope that you find this information helpful. If you do, please leave positive feedback for me.
Posted on Jan 25, 2010
When you plug in the power cord is there any lightswhatsoever on the laptop, where the plug goes in or on the AC Adapter of thepower cord?
When you press the power button do you hear fans running, hard drive spinning,lights on the computer, hear any beeps or lights constantly blinking, hear theDvD/CD drive click and the light on the drawer of the DvD/CD turn on for asecond or two? If so the laptop is trying to boot or may have booted, butthe screen is not showing for some reason.
Beep tones and blinking lights tells the technicians what is going on with thelaptop and why it is not booting. Most times it's a motherboard issuewhen you hear beeps or blinking lights continuous. Most times the problemis with the memory or Video Card. Count the Blinking Lights or Beeps and takenote of their pattern (1 Long or 1 Long followed by 2 Short).
Maybe your power cord is bad if you don't get anything to happen whatsoeverwhen you press the power button. And if that's true maybe you wasoperating off the battery the last time you had it on and since the power cordis bad, it was not charging the battery so the battery is drained and the powercord is bad.
Maybe you have a Static Charge Buildup. Remove the Power Cord, Remove theBattery, then Press and Hold the power button for 30seconds. After 30 seconds plug the power cord back in (leave the batteryout) and hit the power button to see if it boots. If it does, you can putthe battery back in and let it charge.Maybe your DC Power Jack which is where the power cord plugsinto the computer is bad. Take an ink pen and push the tip inside thejack and see if the little pin wiggles, if so the jack is bad. You'll have totake the laptop apart to fix it. Most times it is soldered onto themotherboard, so you will have to desolder the old and solder a new one.Maybe your memory is bad or the memory slot is bad.Remove the Power Cord, Open the Case and remove one of thememory chips. Set the chip aside then try rebooting the computer. If it boots, then you know the memory chip you set aside is bad so mark an x onit with an ink pen. If it fails to boot then move the chip to the nextmemory slot and try rebooting. If it fails take the chip out and set itaside, then put the other chip in and try booting it in both slots. If itboots, just to verify that the chip set aside is bad, mark an x on it and putit into the open memory chip slot and try booting.
Posted on May 25, 2012
Tips for a great answer:
Waste ink full reset
These are the instructions which worked for me on my Canon pixma mp470:
1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.
4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)
5) Press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)
6) Power off then back on and test.
Mar 27, 2011 | Office Equipment & Supplies
Feb 28, 2011 | Canon PIXMA All-In-One Photo Printer with...
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Feb 19, 2011 | Canon i850 InkJet Photo Printer
Nov 17, 2010 | Canon PIXMA MP150 All-In-One InkJet...
Jul 06, 2010 | Canon PIXMA MX320 Color USB InkJet Printer
Apr 17, 2010 | Canon PIXMA MP160 All-In-One InkJet...
Jan 26, 2010 | Canon PIXMA MP160 All-In-One InkJet...
May 20, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
Mar 13, 2009 | Canon PIXMA iP4600 Color InkJet Photo...
Dec 06, 2008 | Canon PIXMA MP150 All-In-One InkJet...
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: