Question about Nikon D60 Digital Camera

Open Question

Shooting movement in poor light! Settings? - Nikon D60 Digital Camera

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Poor picture quality have tried resetting factory settings also have taken photo of picture so you can see what I mean but don't know how to send this to you.


Poor picture quality can mean different things - could you be a little more specific, please ? For example is it over or under exposed ? Out of focus ? Suffering from camera shake or subject movement ? Electronic noise degrading the image definition ?

Jul 17, 2016 | Cameras

1 Answer

On screen after turning on camera have a brachet around a hand - what does that mean - canon powershot sx 600 hs


It's a warning that any vibration or harsh movement on the camera will prevent you from shooting a clear picture. You can still take a picture sure but it might come out blurry or out of focus, not enough light for the camera to lock on proper focusing. It also means it's better if you use a tripod to prevent camera shake or movement.

Mar 02, 2015 | Canon Cameras

1 Answer

Why are my photos blurry?


There are only three reasons photos look blurry: poor focus, shaking the cameral during the shot, or trying to take a photo of a fast-moving subject with a slow-speed camera.

You can usually see focus problems on the display before you take the picture, so that doesn't appear to be your issue. On the other hand, movement of camera or subject happens during the shot, so you'll only see that in the completed photo.

Camera movement first. Many cameras today have built-in "anti-shake" circuits that sense when you're the problem -- you're moving the camera during the shot. The best ones are very good at eliminating shakiness, but even they can't overcome large movement, as when you mash down the button to take the picture. If yours doesn't have anti-shake, or it isn't very well implemented, you'll just have to practice pushing gently on the button and holding the camera very still until it finishes the shot.

As for subject movement -- well, more sophisticated cameras offer ways to capture kids bouncing on a trampoline with a minimum of blurriness, but it's always going to be a problem.

If you don't want to switch to one of the more sophisticated cameras from a major brand, practice holding the camera steady during every shot and avoid shooting fast-moving subjects.

Jun 19, 2014 | Polaroid m737t Digital Camera

1 Answer

My sony DSC H10 cameras flash isnt working what could it be?


Hi,

If the flash is not functioning, then the Camera flash may be turned off or ot is set to Auto and will only flash when the taking pictures in poorly lit environments. To turn on the flash so it works regardless of the lighting conditions, press the flash button on the Camera until the Forced Flash icon appears on the LCD screen. The flash button on the Camera has a lightning bolt symbol on it.
If the Forced Flash setting is already enabled and the flash is still not working, then the issue may be due to another camera setting. Even if the Forced flash setting it enabled, the flash will still not work in the following settings.
When shooting movies.
When shooting in the Twilight or Handheld Twilight mode.
When shooting with the Burst or Multi Burst mode.
Shooting with the Fireworks or high sensitivity mode. (ISO)
Following the above steps should resolve the issue. However, if the issue persists try resetting the Camera back to factory settings and specifications.
Try power resetting the Camera to check if it resolves the issue. To power reset the Camera, turn off the Camera and remove the battery pack. Press and hold the power button for 30 seconds. Remain the Camera without power for 60 seconds and reinsert the battery.
This should resolve the issue.

Thanks for using FixYa.

Jan 27, 2011 | Cameras

1 Answer

My camera flashes lightnot working how can i fix it?


Hi,

If the built in flash does not function, then the Camera flash may be turned off or ot is set to Auto and will only flash when the taking pictures in poorly lit environments. To turn on the flash so it works regardless of the lighting conditions, press the flash button on the Camera until the Forced Flash icon appears on the LCD screen. The flash button on the Camera has a lightning bolt symbol on it.
If the Forced Flash setting is already enabled and the flash is still not working, then the issue may be due to another camera setting. Even if the Forced flash setting it enabled, the flash will still not work in the following settings.
When shooting movies.
When shooting in the Twilight or Handheld Twilight mode.
When shooting with the Burst or Multi Burst mode.
Shooting with the Fireworks or high sensitivity mode. (ISO)
Following the above steps should resolve the issue. However, if the issue persists try resetting the Camera back to factory settings and specifications.
Try power resetting the Camera to check if it resolves the issue. To power reset the Camera, turn off the Camera and remove the battery pack. Press and hold the power button for 30 seconds. Remain the Camera without power for 60 seconds and reinsert the battery.
This should resolve the issue.

Thanks for using FixYa.

Jan 16, 2011 | Sony Cyber-shot DSC-H10 Digital Camera

1 Answer

Sony Cyber-shot takes lots of blurry pictures in


first thing you can do is to try reverting cam back to factory settings.to do that initialize the camera.it's under menu>setup settings>main settings1>initialize. after initializing,set cam to auto adjustment mode (green camera icon in mode dial). what to avoid when taking pictures:
1.subject too close (use macro if needed)
2.insufficient light
3.subject movement
4.camera movement (that's caused by you)
5.incorrect camera setting
5.incorrect camera operation
btw, before you take a picture,press the shutter button halfway down first to give the cam ample time to focus.you'll see a flashing green indicator on the screen that means cam is focusing.when the indicator stops blinking cam is ready for the shot.press shutter button all the way.review your picture.if still blurry, you may try changing iso (for dark or fast moving subject, note:the greater value the noisier the picture gets), metering mode and focus settings by going to the shooting menu (press menu when your in P or program mode). hope this helps.tnx:)

Apr 16, 2010 | Sony Cyber-shot DSC-S980 Digital Camera

1 Answer

I have a red light indicating that I have a shake in my camera and the pictures are all blurry when I take them...how do I correct this?


You're shooting in too dark lighting for your settings. Do you have the flash on? If not, that should fix your problem. If not, your camera may just be super sensitive to movement even at reasonable shutter speeds. That's its problem, but you can correct for it by getting a small tripod, or by resting it on something sold like a table or book while you shoot.

Nov 09, 2009 | Nikon COOLPIX S6 Digital Camera

1 Answer

Poor quality pictures when taken inside of school gymnasium


The problem you face is that shooting good photos "inside a school" is a very difficult situation due to the low light. Your eyes can adjust to the low light, but there is only so much a camera can do to get good photos in a low light situation. The IXUS doesn't have a very fast lens or high ISO, so when you get into low light it has to use a slow shutter, which often means blurry images.

First, make sure the camera is shooting with the highest ISO settings. You will find the instructions on page 64 of your manual, and can also read them online here.

Second, use a tripod to stabalize the camera to minimize blur from camera shake.

Finally, if neither of these work then you will need to use a camera with better low-light capabilities, such as the Canon Powershot SX10 IS.

Dec 12, 2008 | Canon PowerShot SD630 Digital ELPH / IXUS...

1 Answer

Poor picture quality fs11


Please check the details.. How was it taken? (esp the lighting.).. In low light, or in indoor shooting in evening, or using flash when the subject is a bit too far away can result in totally disappointing pics. Try outdoor when the lighting is proper with the correct settings... If you are not sure about the settings, put it in auto mode... This is not a bad camera. Just try it out...

Aug 25, 2008 | Cameras

1 Answer

Not happy with my CD300


The problem is in your ISO. The camera has a terrible noise problem at anything over 100 ISO. I set my camera to 100 even when shooting in auto, and never use any other ISO setting - the results are just not worth it. Hang in there. The camera is awesome and you will make friends with it. The settings are really not that complicated once you get used to them. Just decrease your shutter speed and increase your aperature (lowest number) when in low light conditions and watch the LCD until it looks good (you might have to half press the shutter to get a preview), until you get a bettter grasp of what those adjustments are doing for you. Good luck, Cindy

Sep 12, 2005 | Sony Mavica MVC-CD300 Digital Camera

Not finding what you are looking for?
Nikon D60 Digital Camera Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...