Question about DISH Network IR Remote Control

Open Question

Prgramming a rca soundbar to an echostar 20.0 IR remote for dish network

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 51 Answers

SOURCE: Echostar IR remote (Dish)

to set remote to tv
1)hold down tv button next to sat button in top left corner
2) when all buttons illuminate press 500 into remote
3)press pound sign
4)Hello, please help..
5)hold town tv button again.
6)when all buttons illuminate press big red power button
7)press up arrow once a second until tv shuts off
8)press # pound sign
9)try to turn tv back on w/ big red power button
10)if tv doesnt turn back on try again from step 2 but use down arrow instead

to set remote to receiver you need to access system info, if there is no sys info button on your receiver turn power off and press the up arrow, then press record 2 times on the remote,

Posted on Aug 06, 2008

  • 374 Answers

SOURCE: Programing the DISH NETWORK IR REMOTE CONTROL to

Since there are little specifics given please go to the following site and match your equpment to discover the answer.This is our Tech Portal site. Just match your remote to the remotes listed under the remote link and go to program codes for your TV model.If you need help programming remote go to the receiver link and match your receiver then go to the manual or user guide to the section regarding this issue. Thanks for using Fix Ya.
http://tech.dishnetwork.com/departmental_content/TechPortal/index.shtml

Posted on Dec 21, 2009

NickF DISH
  • 36 Answers

SOURCE: Dish Network IR Remote's SAT Mode Not Working ____

Hello, this is Nick Franta with DISH.

If you are trying to get the remote programmed to the receiver you can remove the smartcard from the receiver and that will prompt the system info screen. This will allow you to program the remote to the receiver.

If you need the process for programming the remote, here it is:

  1. Go to System Info screen (in this case -- obtain by removing smartcard from receiver)
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button
  5. Once the SAT button blinks three times, press record.
Hope this helps!

Posted on Jan 03, 2011

BeckiB_DISH
  • 286 Answers

SOURCE: EchoStar dish network remote control #132577 will

This is hopefully resolved by now, but I do have some simple steps to give you if you have any questions. Follow the link below, it will walk you through getting the remote set up. The post is not too detailed on exactly what is going on, but to me, it sounds like you want to get the remote reprogrammed, and the link below will help. I do apologize if I interpreted it wrong and if I did so, please post back.

http://www.dishnetwork.com/SupportSection/remote-setup


Becki Barned
DISH Network Customer Service

Posted on Jan 19, 2011

TommyF DISH
  • 263 Answers

Delivering video anywhere, anytime.

    Verified Fixya Pro

    SOURCE: Need Dish remote code (6.4 IR/UHF) for Vizio VSB200 Soundbar...

    There are no codes available for a 6.4 remote on a Vizio Soundbar. Below are the steps to Power Scan the remote control. This will search all codes 1 by 1 until it finds a code that works, or exhausts all available codes.


    Power Scan:

    1.) With the Soundbar on, press and hold the AUX mode button (about six seconds) on top of the remote until all mode button backlights come on, then release.

    2.) Press 2 then press STAR (*)

    3.) Press the Up arrow button once a second while pointing the remote at the Soundbar. If the code for the Soundbar comes up, it will power off.

    4.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

    Tommy Faust
    DISH Social Media Representative

    Posted on Feb 15, 2012

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Need a remote code for a Magnavox MWC13D6 TV conected to Dish network 311 receiver and a EchoStar 3.1 IR remote


    Check these codes. 506, 520, 525, 536, 564, 565, 566, 567,
    568, 569, 573, 575, 610, 710, 712. If you wish to get more details and setup codes, check this link.

    Feb 10, 2013 | DISH Network IR Remote Control

    1 Answer

    EchoStar IR Remote 103781 where to purchase in Toronto, Ontario


    Gordon ****,

    You can definitely order a remote through an agent by calling in. To pick one up locally, I would recommend going to a authorized retailer. Use the link below to lookup local retailers in your area! If you have any other questions or need any assistance, just let me know!

    Link: http://www.dish.com/support/tools-apps/locate-retailer/

    Tommy Faust
    DISH Social Media Representative

    Aug 17, 2012 | DISH Network IR Remote Control

    1 Answer

    Need Dish remote code (6.4 IR/UHF) for Vizio VSB200 Soundbar...


    There are no codes available for a 6.4 remote on a Vizio Soundbar. Below are the steps to Power Scan the remote control. This will search all codes 1 by 1 until it finds a code that works, or exhausts all available codes.


    Power Scan:

    1.) With the Soundbar on, press and hold the AUX mode button (about six seconds) on top of the remote until all mode button backlights come on, then release.

    2.) Press 2 then press STAR (*)

    3.) Press the Up arrow button once a second while pointing the remote at the Soundbar. If the code for the Soundbar comes up, it will power off.

    4.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

    Tommy Faust
    DISH Social Media Representative

    Feb 12, 2012 | DISH Network IR Remote Control

    1 Answer

    Yamaha stario codes for echostar tecnologies ir remote 103781


    Hey Hiall Hollingsworth,

    I would need the remote model to provide more specific codes, but a few for Yamaha Stereo are 663, and 733. You can view the link below to get model specific codes!

    Link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx

    Let me know if you have any other questions!

    Tommy Faust
    DISH Network

    Nov 19, 2011 | DISH Network IR Remote Control

    1 Answer

    I have an 20.0 IR EchoStar Technologies L.L.C 155681. For some reason the input button is not working. Whenever I press the TV button and press input it doesn't work. Does anyone know what the problem is?


    Our remotes may not carry all of the normal functions your factory remote would. The remote you have is capable of learning additional functions, the link below will open a tutorial guide for this: www.dishnetwork.com/SupportSection/FileStream.ashx?ID=678

    Daniel Busa
    DISH Network
    Customer Service

    Apr 01, 2011 | DISH Network IR Remote Control

    1 Answer

    Dish Network IR Remote's SAT Mode Not Working ________________________________________ I programmed my Dish Network Remote (IR 1.5 Blue Button Remote Control ) for my Sharp 27F543 and now the remote would...


    Hello, this is Nick Franta with DISH.

    If you are trying to get the remote programmed to the receiver you can remove the smartcard from the receiver and that will prompt the system info screen. This will allow you to program the remote to the receiver.

    If you need the process for programming the remote, here it is:
    1. Go to System Info screen (in this case -- obtain by removing smartcard from receiver)
    2. Hold down the SAT button until all mode lights light up.
    3. Enter a number between 1 and 15 using the numeric keypad on the remote.
    4. Press the pound (#) button
    5. Once the SAT button blinks three times, press record.
    Hope this helps!

    Jan 01, 2011 | DISH Network IR Remote Control

    1 Answer

    Echostar technologies 20.0 ir 155681 it won't stop changing Chandler on it's own running batters down


    yild43

    Normally when your channels change on its own, you may have a neighbor who also has DISH Network with both remotes (yours and theirs) having the same remote addresses. We would readdress the remote to the receiver giving your remote a new address. Since the remote is also draining batteries, this indicates the remote is not functioning correctly. Please call 1-800-333-3474, talk with Technical Support; we need to replace your remote. I hope this helps.

    Ray Calo
    DISH Network

    Nov 18, 2010 | DISH Network IR Remote Control

    1 Answer

    5.0 ir / 118575 remote 1 will not work on sat. functions but will on tv functions..Ive changed the Batteries Echostar Technologies Corp


    lt911

    I have provided instructions on how to readdress the remote to your receiver. If this doesn't work, we may need to replace the remote. I hope this helps.

    Readdress remote to receiver, step 5:
    http://www.dishnetwork.com/SupportSection/remote-setup

    Ray Calo
    DISH Network

    Aug 29, 2010 | DISH Network IR Remote Control

    1 Answer

    Want to use my remote for a Echostar 4100 on my other box which is a 3100 i have remote IR remote 103781


    me1969

    The remote you mentioned is not compatible between the different receivers. Some remotes can be used with different receivers. You would need a new remote if you are having problems with the other remote. I hope this helps.

    Ray Calo
    DISH Network

    Apr 03, 2010 | DISH Network IR Remote Control

    1 Answer

    I want to use my Echostar Tech. IR remote model 103781 to operate my JVC PCX-101 portable stereo, but I have no instructions or code. Can you help? Thanks .... Doug .... dgplcy@yahoo.ca


    http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotes/8.0.shtml This is the site that will help you with your issue.

    Thanks for using Fix Ya.

    Feb 12, 2010 | DISH Network IR Remote Control

    Not finding what you are looking for?
    DISH Network IR Remote Control Logo

    Related Topics:

    15 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top DISH Network Televison & Video Experts

    brian soufane

    Level 3 Expert

    693 Answers

    john milligan

    Level 3 Expert

    512 Answers

    Jaime Hernandez

    Level 3 Expert

    2315 Answers

    Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...