Planar PR3010 turns on (steady orange Ready LED & steady green Power LED), but there is no light coming from the bulb

There is a sensor in those that can tell if you are using an original bulb or another one, IF you just changed the bulb and not the module then it may not see the new bulb.

Planar PL LCD Monitor Fix - MarsBox.com

marsbox.com > Blog > Howtos

Nov 3, 2008 - Planar PL LCD monitor has flashing power led with no image. ... You will know it worked if the monitor diplays "No Signal" message when ...

What is the method to reset the Planar 1910m monitor?

superuser.com/.../what-is-the-method-to-reset-the-planar-1910m-monitor

Apr 6, 2010 - My monitor (a Planar, apparently model number PL1910M) is not working. (It is flashing a green / orange sequence which I believe to be an error code. The sequence, in ... I wasn't even seeing a "no signal" message and I couldn't turn it off using the power button. ... Computer resets when put under load.

ViewSonic VX922 monitor - black screen - green power light flashes ...

www.tomshardware.com > Forum > Displays

Tom's Hardware Guide
Feb 1, 2008 - 50 posts - ‎27 authors
Repair ViewSonic VX924 LCD Monitor Blinking Green power Button ... cant switch back & forth to desktop out of some games without the monitor going .... Nothing else on the board looks bad, the power supply board is dark brown ... to this madness we are unfortunantly dealing with daily with our monitors.Missing: planar ‎pl1700

Use the remote to switch problem,if it's not works,I am sure the power board problem


https://www.Abctay.com is an online shop ,
We sell television and electrical accessories,all kinds of TV power supply board, logic board, TV LED screen,
TV LCD screen, mobile phone screen, as well as various types of electronic tools,tv parts power supply,LCD,ccfl ,
LED,OLED,lcd panels,HMI,Inverter,LCD screen,lg screen,display screen,lcd monitor,lg lcd, lg monitor ,flat screen ,
touch screen,hmi,bulb,samsung, innolux ,Mitsubishi,philips, hitachi,auo,innolux,Planar, toshiba, siemens,chi mei,Weinview,
Infineon,industrial LCD,industrial control, sharp monitor,vigor plc,delta, mitsubishi lcd,omron plc,etc.

try reseting the lamp timer and then replace the lamp if it works

reset the lamp timer. unplug it and plug it back in. hold down the enter, down, and menu buttons, then press the power button.

ballast is not striking the lamp and needs replacing

Can I ask where you got the capacitor kit from?

who changed the caps and what caps did they change, also there are two switches on the board one should be normal and the other on 30v

try pressing and holding the enter button on the projector for about 30 seconds - this resets it. It worked for me!!