Question about Mitsubishi WD-73736 Television

Open Question

Mitsubishi WD75-736 DLP TV HDMI/DVI PC/DVI SOund issues

I have a DVI/HDMI adapter that is allowing me to use the DVI Output from my PC to connect to HMDI-1 to the TV. Video works fine. I am taking output from sound card in PC using RCA cable to connect to Input 10 (DVI-PC Audio) on TV. When I have HDMI Cable plugged into TV, there is no sound, the moment I unplug HDMI cable there is sound from PC. If I plug HDMI into HDMI-2 withOUT deleting HDMI-1 setup, so there is two active HDMI "inputs" (as in what you select what you want to watch, Cable, DVD, PC, etc), whichever one has the HDMI plugged in has no sound, sound comes through the other HDMI Input. Sound comes through both if there is no HDMI cable plugged in. What is going on here? Is there a setting I am missing. Please help!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

premtech
  • 934 Answers

SOURCE: dvd plays fine sound/picture...No sound or picture with cable input

John,
To answer your question no, there are no fuses associated with the tuner input - through the "F" connector jack.
You have there a V26 chassis which has, among other things, standard digital and analog signal inputs. If one works but not the other - and you've verified it's not the cable then the only alternative is the signal board, Mitsubishi p/n# 930b923002...
But don't rush out and buy this puppy, it's a fairly expensive board and there are alternatives to replacing it new or used - PTS Electronics can rebuild this board for half the cost of a new one and most techs use PTS for that reason.
My best advice is to have a qualified shop estimate the repair and if they decide that the signal board needs to be replaced and quotes you a price ask them then about having it rebuilt.
Also take the unit to them to save the pickup/delivery charges and ask for your estimate in writing...
Hope this helps!
Bill

Posted on Dec 06, 2007

  • 1 Answer

SOURCE: Mitsubishi HDMI connection trouble

I have the same issue with my 73". Rather then going over all of my connections and equipment I'll just say htat I feel your frustration. I have been on the phone with Mitsubishi directly and it appears as though they have a free software upgrade that should address this problem. If you call 1-800-332-2119 and press 4 in the menu you will get someone to help you. Be patient. They will make you go through all of the fixes that you have already tried. They will mail you a flash drive that goes right into the front USB port of your TV. I hope this is of help. Good luck.

ret4good

Posted on Jan 05, 2009

diths_kri
  • 67 Answers

SOURCE: No Picture from Component Input #1 or #2 but do have audio via Surrond Sound

Simplest thing would be that your component cables are not HU'd correctly. Having them reversed would do this.

Posted on Jan 07, 2009

Drew_1
  • 10 Answers

SOURCE: Screen flicker when selecting Blu-Ray player w/ HDMI-1 selected.

Something to remember is that most HDMI setups on TV's have what is called a DVI/HDMI port, I would suggest not using anything on that port that isnot converted from DVI to HDMI. I bet if you look, that HDMI 1 on yours....

Posted on Feb 10, 2009

Drew_1
  • 10 Answers

SOURCE: I have a model WD-60735

either your cable or your dvd player. Have you tried it on another tv to make sure its working?

Posted on Mar 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i connect my tv thru a dell optiplex745


Does your TV have a VGA port? If not it most likely has an HDMI port. Does your PC have an HDMI out on the video card? If not then you will need a VGA to HDMI adapter, OR a DVI-D to HDMI adapter, depending on if your GPU output is VGA or DVI-D. Then you will need an HDMI cable to go from the TV to the adapter.

Oct 17, 2013 | Dell OPTIPLEX 745 PC Desktop

2 Answers

I have a 2002 Mitsubishi Medallion TV. The only input for HD is DTV (no DVI or HDMI inputs). Is there a converter box from HDMI to DTV that will allow for 1080i resolution?


From looking at the back panel of the TV, the DTV input can be configured as a component video. The M-Link/DVI-HD port is also a DVI with HDCP port and maximum signal handled is 1080i. The M-Link should work with an HDMI to DVI cable or adapter. For this to work, the source must not be a computer or another device using the default computer video output (computers give RGB output). The DTV port would need an HDMI to Component video converter. See this page for some examples: http://www.hdtvsupply.com/hdtocoad.html . The first one in the list (for Netflix and Boxee among others) will give 1080i out if the source is set correctly.

Most DVI-HDMI cables are single link. I've seen some examples where DVI-I (single link) and DVI-D (dual link) cables are not interchangeable. If you have video problems, check your cable. An HDMI to DVI adapters will let you run an HDMI cable up to the TV and then converter at the TV as a separate connection.

I hope this helps.

Cindy Wells

Nov 17, 2010 | Mitsubishi WS-65613 65" Rear Projection...

1 Answer

What kind of cable if any can i use to make my wd52526 proj tv my pc comp monitor


Your projection TV has HDMI input so you would need to either run an HDMI-HDMI cable from an HDMI output on your computer or, more likely, a DVI-HDMI cable from the DVI output on teh computer to the HDMI input on the TV. If ycou can'T find a DVI-HDMI cable note that you can also buy DVI/HDMI adapters for one end of an HDMI-HDMI cable.

Note that DVI is HDMI minus the sound so if you do run DMI to HDMI you'll also need to route the sound to your TV or other amplifier.

If you only have a VGA output on your computer then you will not be able to easily run this to your TV as VGA is an anologue signal while DVI and HDMI are digital. To do this you'd need a converter.

Hope this helps. If so then please rate my advice.

Thanks

Sep 03, 2010 | Computers & Internet

1 Answer

How can I connect Panasonic TH-37PX60U Flat panel plasma tv to my computer?


It will depend on your video output options on the computer. If you have HDMI output, just use an HDMI cable and an audio cable (this will need to be a 3.5 mm to RCA audio cable). If you have a DVI output, use a DVI to HDMI cable and the audio cable (or a DVI to HDMI adapter and either a DVI or HDMI cable depending on which side you want to put the adapter). If you only have VGA out from the computer, use a VGA to DVI adapter and the DVI to HDMI connection and the audio connection. (Theoretically this should work but each adapter will have some signal loss issues.)

Some graphics cards have a video output, S-video or Component video, which would also connect to your TV with the audio cable. (Read your cards manual for more information)

I hope this helps.

Cindy Wells
(For DVI to HDMI cables, you will need to check if you have a single link or dual link DVI output. The wrong cable may not work.)

Feb 20, 2010 | Panasonic TH-42PX60U Television

1 Answer

How can i watch movies from computer to my tv


You probably need to get a composite video output card for your computer. Actually, I've seen many cards that have both a composite video output AND a DVI output port on 1 card. The DVI output will give you a noticeably sharper picture than composite video, but you need to check if your TV has a DVI or HDMI input. (If it was manufactured after 2000, it probably does.) If you TV was manufactured after 2006, it probably has 1 or more HDMI inputs instead of DVI. You can buy a DVI to HDMI converter cable. That takes care of the picture; to get sound to the TV, you will need to connect separate sound cables to your TV. Your computer needs to have a line-level output jack on it's sound card, and you will need to get an adapter cable (from Radio Shack) to convert the stereo mini-plug to 2 RCA type plugs to plug into your TV. And that should do it!

Dec 17, 2009 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

How do i connect my compaq pc to tv


Without the model number comptuer, I cannot verify what outputs your comptuer has. Without this, I will provide the various ways a PC can be connected to a TV.

1. Use a VGA to DVI adapter (HD-15 pin to DVI). Use either a standard VGA montor extension cable (cheaper) or a DVI extension cable (more expensive) to make the connection

2. If you computer has a DVI output, use a DVI extension cable only

3. If your computer has HDMI output - use a HDMI to DVI adapter and either a HDMI or DVI extension cable.

In all 3 cases, you will probably need to go to the comptuer's Display Properties and adjust the screen size so it looks OK on your TV (go to the Control Panel - find Display) and adjust the screen resolution to match the format of your TV.

One note - when purchasing DVI cables, understand that there are 3 types - DVI-D (digital), DVI-A (analog) and DVI-I (digital and analog) and that the pin outs are different. Be sure to check your the owners manual of your TV to find which connection it needs.

Here is a good reference for DVI types

http://www.interfacebus.com/Design_Connector_Digital_Visual_Interface_DVI_Bus.html

Dec 02, 2009 | Compaq Computers & Internet

4 Answers

Can i connect a dvid cable from the monitor to my flat screen tv hdmi to watch videos from my computer? Thank you Martin


the Flat Screen TV if has, a HDMI input, also has VGA Input.

You must choose :HDMI or VGA, if HDMI The VGA board must Have HDMI Connector, and you connect a HDMI cable to the TV.

The HDMI is a digital signal input/output, VGA is Analog Signal. You must have Signal Converter if you Use the 2 signals

Oct 31, 2009 | LG Flatron F700P 17" CRT Monitor

1 Answer

What do I need to hook it up to an hdtv...what type of cables..DVI-D to HDMI?


Your laptop will need a HDMI output or a DVI output for HD video. If your laptop only has a VGA out the your tv will need a VGA or DVI input. You could use a vga to dvi adapter if your tv does not have a vga connector. They do have a DVI to HDMI adapter but there are a couple of problems with that. One you will not get the sound and the TV will only obtain sound from HDMI cable when connected that way and Two the TV will have problems processing the signal from the computer due to the HDMI will only process the HD signals at certain formats and the computer video can send out many different signals. I tried and I could not get my tv to process the signal so I got a video card that has a HDMI out and my blu-ray player works great.

Sep 24, 2009 | Acer Aspire 3680 Laptop

1 Answer

I can not connect my pc to my samsung dlp


Not all TVs have video inputs to directly connect the computer output. Some computers have video cards that have separate outputs(usually S-Video) which you can use. Or you can purchase a video card that has the proper outputs.

If your computer has a DVI output, and your TV has an HDMI imput, there are cheap adapters that you can buy, as HDMI can process the DVI signal directly, just the cable is different.

If you need more assistance, we would need to know the models/outputs/inputs of both the computer and the TV.

Best Regards

Nov 11, 2008 | Samsung Televison & Video

1 Answer

Connecting an LCD TV to a computer to use as TV and Comp. Monitor.


Im no expert on the subject, but I use my L37 for a monitor, and use just the vga adapter. It works good as a monitor, and both dvds and my hdtv wonder tuner card look great through the vga connection. They do make adapters for dvi to hdmi. Although, hdmi also carries sound, but you wont get that out of your dvi output from your card. So you might not have sound when using that connection, as your tv may not look to the headphone type jack used for sound imput from your computer when you select the hdmi source on it. If you have speakers already connected to your computer you may not care. Also if you have a 720 p Vizio, 1366x768 is the highest resolution you are going to get out of it anyway, if I'm not mistaken. I'm Not sure why you would need 2 connectios to the same monitor either. I posted 1 link below because they had several dvi to hdmi adapters. Hope that helps.

http://www.bizrate.com/computercables_adapters/products__keyword--hdmi+dvi+d+dual+link.html

Jul 18, 2008 | Vizio L37 Television

Not finding what you are looking for?
Mitsubishi WD-73736 Television Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...