Question about Canon FS400 Camcorder
Camera Cord was pulled out of the wall and now will not charge or turn on, I have ordered a new cord and new battery but the camera will not turn on or charge.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This incident happens often and damages the camcorder's power board. Replacing power board and some adjustment should resolved the problem. Your cost may run from $175-$225 in US for this model. Whenever you are transfering and connecting to pc, it is recommended to connect AC adapter power for this. Do not rely on a charged battery. Good luck.
Posted on Mar 18, 2007
SOURCE: Camera will not charge
If you know someone who has electrical testing equipment, they can test the charger to see if it is still putting out a charge. I doubt it is the battery because you said the charge light doesn't light when the unit is plugged in. Other than that, sounds like a bad component inside. Get it checked by a pro because you can get zapped or ruin something by poking around inside if you don't know what you are doing.
Posted on Jun 19, 2007
SOURCE: my canon zr400 wont turn on
ITs most likely a fuse, unfortunately you can change it or its a son of a gun to change. You can check by removing the motherboard, locate the fuse, they are micro fuses, it either has the letter H or K etched on it, there could be anywhere from 1-5 of those fuses. Check for continuity if that s the problem than replace it, if you cant find a replacement micro fuse than solder over the fuse for continuity...that should make the camcorder power on, but beware once you solder over the fuse- there will be no more current protection for the camcorder. If the fuse is not the problem than it could be a loose circuit...
Posted on Apr 02, 2008
SOURCE: unable to load video to imac
Most cases, with apple product, I did not have much problem compare to PC computers. I'm not a Mac user but we do have hookup at the shp and simply we use iMovie program to edit and test equipment. Here is how we do it. 1. Set the camcorder at VCR mode and play short portion for a few time for operation. 2. open iMovie program, 3. hook up the firewire cable. If this procedure did not produce the connection, you may have a hardware problem. -James
Posted on Mar 28, 2009
Tips for a great answer:
Jul 20, 2011 | Canon PowerShot A3100 IS Digital Camera
Mar 06, 2011 | LG Ally Cell Phone
Jan 15, 2011 | Mission Spy Net Secret Mission Video Watch...
Dec 22, 2010 | Sony Cybershot DSCW80 7.2MP Digital Camera...
Jan 28, 2010 | Kodak EasyShare M320 Digital Camera
Jan 05, 2010 | Nikon Coolpix S210 Digital Camera
Sep 21, 2009 | HP Pavilion zd8000 Notebook
Aug 26, 2009 | HP OfficeJet 6110 All-In-One InkJet...
67 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: