Question about Siemens Washing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My old Bosch only had a filter in the machine (where the hose attaches. My Exxcel has a filter IN THE HOSE at the tap end too. I removed that one and it made a big difference !
Posted on May 07, 2010
It is your pump that is failing / bolked with hair and treds behind the impeller. The pump is not the best design as ther can enter smal treds and hair behind the impeller into the paking ring (seal). There is only one sollution that help - change the pump. Can be don from the fron of the mashine. Only one screw on the right side has to be removed to remove the plastig cover and the one screw to losen the pump.
Posted on Aug 22, 2010
F17- covers the following problems supply hose kinked/jammed, clean filter, water pressure too low
Posted on Nov 28, 2010
Testimonial: "Thank u for your advice I think the pipe is frozen."
SOURCE: f17 comes up on my
F17 indicates that water is not getting to the machine. Ensure:
The supply line is not kinked/jammed
Water valve is not shut off
Pipes are not frozen
If you have a basin sink adjacent to the washer you can also use that to test that the water pressure isn't too low.
You can also clean the water filter in the machine (Refer to your specific model's manual for instructions)
Posted on Feb 28, 2011
Tips for a great answer:
Nov 06, 2017 | Siemens Washing Machines
Oct 05, 2014 | Siemens Washing Machines
Mar 27, 2013 | Washing Machines
Jan 06, 2013 | Washing Machines
F17 indicates no water coming into the condensing chamber during drying.
Unplug the appliance.
Take the top off.
Check to see if the condensing chamber below the heating chamber is blocked.
Oct 15, 2012 | Siemens Washing Machines
Sep 13, 2011 | Siemens Washing Machines
May 29, 2011 | Siemens WIQ1633 Front Load Washer
Jan 25, 2011 | Siemens Washing Machines
Jan 14, 2011 | Siemens Dryers
126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: