Question about Washing Machines

Open Question

Error code E05 on candy tumble dryer - Washing Machines

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
sodeep
  • 3267 Answers

SOURCE: Hi i have candy go washing machine it shows error

E05 indicates that the pressure switch is stuck on full, this may be that your pump is jammed or blocked. Remove the filter and clean it out, also try to fish around in the tube that leads up to the drum. If this doe snot remedy the fault have it repaired by an engineer or someone whom has a rudimentary understanding of the mechanics of a washing machine.

Posted on Jan 08, 2011

Ad
  • 6277 Answers

SOURCE: I keep getting an error

Hi from retired Englishman in SW France,

In general Whirlpool's Error 05 points to an NTC failure.
'NTC' stands for 'Negative Temperature Co-efficient' or water temperature thermostat in real terms!
One way of hopefully getting around the problem is first to ensure the washer is empty then pour the contents of a boiling kettle into it. That can sometimes kick the device into correct action. It's worth a try anyway before having to call in the repair man ;-0)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Posted on Apr 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My candy condenser dryer isn't heating up. I have cleaned it and emptied the water canister. The drum is turning ok . just will not heat and all six lights flash after around 15 min.


What To Do If Your Tumble Dryer Is Not Heating Up - YouTube

? 2:33
https://www.youtube.com/watch?v=uWtRXie82oY
Nov 17, 2011 - Uploaded by BuySpares
For all your tumble dryer spare parts and accessories, visit: http://bit.ly/1K45iyb If your tumble dryer isn't ...

How to repair tumble dryer when is not heating or drying ...

? 8:52
https://www.youtube.com/watch?v=75l_AtpGkks
Dec 6, 2009 - Uploaded by how-2-repair.com
http://www.how-to-repair.com/help/repair-guides/tumble-dryers/ This usually means ... Up next. Whirlpool ...

Tumble dryer not heating - White Goods Help




Nov 28, 2015 | Candy Dryers

1 Answer

How can I get access to a Candy Grand tumble dryer to change the element?


Google search Candy Grando Tumble Dryer service manual. If one is available, you can download it and find the information you seek.

Apr 30, 2015 | Candy Dryers

1 Answer

Candy error code e05


The error code E05 means the temperature sensor has gone bad.

Aug 24, 2014 | Candy Washing Machines

1 Answer

Error code e61


Identification
  • GE dryers use three-character codes that display on LCD screens. Every code starts with "E" and is followed by a two-digit number.
Power Failure
  • When your home loses power, the "E01" error flashes on the screen. Reset the dryer memory by unplugging the device, waiting 30 seconds and plugging it back in. The error code will disappear.
Thermistor Errors
  • Errors "E02," "E03," "E04" and "E05" are thermistor errors. The thermistor, when operating properly, reads the temperature of the dryer. Errors E02 through E05 indicate the thermistor must be replaced.
Effects
  • When there is an error with the door switch and sensor, the "E60" error code will appear. An unbalanced door will produce the E60 code. Try to close the door gently and listen for the click. If the error remains, the door switch may need to be replaced.
Control Board Errors The control board sends signals from the controls to the dryer. When this fails, errors "E61," "E80" and "E81" appear. Contact GE service or install a new control board for the dryer

Jan 15, 2013 | Electrolux Dryers

1 Answer

Hoover washing machine showing H05 error


Error code: h05 coming up when i switch on the tumble - Fixya

www.fixya.com/support/t8443068-error_code_h05_coming
Feb 24, 2011 - Question about Washing Machines. Open Question ... SOURCE:Hoover washer/dryer VHW854D SHOWS ERROR. I have exactly the same ...

I have a 3 month old Hoover washing machine [DYN10146P ...

www.fixya.com > Forum > Washing Machines
Aug 11, 2011 - I have a 3 month old Hoover washing machine [DYN10146P] with aH05 fault. ... Have just looked in the service manual, it reads: Error 9 - Cancel the programme by returning the selector to the OFF .... show e-60 on screen.

Hoover and Candy Washing Machine Error Codes - YouTube

? 5:00
https://www.youtube.com/watch?v=kzhlvB2LjXg
Sep 1, 2014 - Uploaded by eSpares
Does your Hoover or Candy washing machine stops before .... I have a question: My Hoover displays the error code E08. what can I do to fix it?

Nov 18, 2012 | Washing Machines

1 Answer

Hi i have candy go washing machine it shows error cond e05 What to do?


E05 indicates that the pressure switch is stuck on full, this may be that your pump is jammed or blocked. Remove the filter and clean it out, also try to fish around in the tube that leads up to the drum. If this doe snot remedy the fault have it repaired by an engineer or someone whom has a rudimentary understanding of the mechanics of a washing machine.

Jan 08, 2011 | Candy GOY105 Front Load Washer

1 Answer

Error code E1 for a Candy cdi454-s dishwasher....any ideas ?


Error code E05 for a Candy CO 5100d dishwasher....any ideas ?

Oct 18, 2009 | Dishwashers

1 Answer

CANDY TUMBLE BRYER BELT


i changed the belt on my candy civ 100 but it wont turn on yet all the wires seem to be connected and the fuse in the plug is ok

Apr 25, 2009 | Candy Dryers

1 Answer

Dryer not tumbling


A broken belt is very common. If you hear the motor running, that's probably it. The dryer must be taken all apart to replace the belt. Hopefully instructions will come with the new belt. Routing the belt over the motor shaft and around the tensioner is always a challenge.

Apr 22, 2009 | Candy CDV262 Dryer

1 Answer

Candy CIC60 01 Tumble drier


Hi you need a new heating unit which is behind the back casing. Price approx £42 plus labour

Jun 01, 2008 | Candy CDC266 Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

75842 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...