Question about Washing Machines
Pls contact me on firstname.lastname@example.org
Posted by Anonymous on
Be aware that most washing powders have filler in them, mostly sodium sulphate. Only the really expensive brands do not. This will not dissolve as readily. Try using liquid wash detergent instead.
It is not a good idea to post your personal email on this public forum.
Posted on Feb 10, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You said these particles stick to the clothes, do they come off and then leave a stain? It may be grease or oil coming from a leaking drum bearing seal.
If it is, This is a major repair and not one for DIY.
Posted on Sep 28, 2007
Inside the dispenser drawer, at the bottom there is a tab that you can push down to remove the dispenser drawer. Remove the drawer and check if the dispenser holes are clogged, this is a common cause.
Posted on Mar 22, 2008
Caustic soda. Be careful to wear gloves. Fill tub with water, cold will do, put in about 100gms of soda and turn on a extra large wash cycle only. Don't let the water drain, allow to stand over night, then complete wash cycle. You will find that hugh amounths of lint come loose. Repeat if necessary. I now do this about once every two months. Another thing to remember is to always leave lid open when machine is not in use, this prevents musty smells.
I have become obbsessive in sorting out the problems discussed and am now looking for a service manual for a WF-T7014PP as i want to remove the pulsators to ensure ther is no lint stuck in there. If anyone can assist please mail to email@example.com
Posted on Jun 25, 2008
* General tips
* Balance the load
* Level the machine
* Inspect the water pump for a blockage
* Inspect the coupling
* Inspect the transmission
* Adjust the drive belt tension
* Check the motor bearings
* Check the drum brakes
The above are possibly the general remedies for this problem.But possible if the problem still persists after this, possibly the drum bearings might have been damaged during the previous heavy vibrations.Please do post comments.Will be glad to help you out.Good luck.
Posted on Jan 16, 2009
Tips for a great answer:
Mar 21, 2015 | Ariston Technologies Washing Machines
Feb 24, 2015 | Poulan Pro 16-Inch 38 cc Anti-Vibration...
Dec 31, 2014 | Samsung SW62ASP Top Load Washer
Nov 22, 2013 | LG Washing Machines
Feb 01, 2012 | Samsung Washing Machines
Oct 19, 2010 | Samsung SW62ASP Top Load Washer
May 06, 2010 | Whirlpool LSQ8000 Top Load Washer
Nov 12, 2009 | LG WM-2277HW Front Load Washer
Dec 14, 2008 | Maytag Atlantis MAV6000 Top Load Washer
64 people viewed this question
Usually answered in minutes!