Question about Icon Epic T60 Treadmill

Open Question

How to check miles on epic t60 treadmill - Icon Epic T60 Treadmill

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: Epic treadmill t60 is stuck in max incline how do

Usually when stuck at the max up position it indicates that you may need a new incline motor. It is not the sensor. I have been repairing treadmills for 15 years and incline sensors seldom if ever go bad. If can isolate the incline motor using a 110 volt power cord, this may un-jam the motor and get it back down to 0%.
I use www.treadmillpartszone.com for parts.

Posted on Jul 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motor starts and shuts down within 2-3 seconds and will not operate belt.


If you wish to get some details; check the site linked here. Pull up older posts for treadmill . Surf the site with patience.
http://electro-medical.blogspot.com/

Jan 10, 2016 | Icon Epic T60 Treadmill

1 Answer

Motor starts and shuts down within 2 seconds. About 12 years old


If you wish to get some details; check the site linked here. Pull up older posts treadmill . Surf the site with patience.
http://electro-medical.blogspot.com/

Jan 10, 2016 | Icon Epic T60 Treadmill

1 Answer

Treadmill- Epic T60. Immediately starts of at full speed and causes circuit breaker to trip


Hi There,

This problem could be a faulty speed sensor . Especially with optical speed sensors. The other reason could be a faulty LCB ( MCB)

Apr 15, 2013 | Icon Epic T60 Folding Treadmill EPTL81804...

1 Answer

Belt is stopping when i begin to walk on it.


On my Epic you can adjust the belt tension by using an allen wrench in the holes on the end of rails. Tighten 1/4 turn on each side and see how the tension is. Repeat another 1/4 turn if necessary.

Feb 02, 2011 | Epic Overstock T60 Treadmill Treadmills

1 Answer

I have an Epic t60. The incline stopped working. I was in the midst of going from flat incline to full and then back down again when it stopped. The incline numbers now register on the display, but it...


Try to recalibrate the incline. Start the machine running, press the incline up button, then pull the safety key off. Release the incline up button and replace the safety key. The treadmill should go to maximum incline then minimum. after calibration is completed, retry the treadmill operation.

Jan 11, 2011 | Epic Overstock T60 Treadmill Treadmills

1 Answer

Tread skips or stops when running


On my Epic you can adjust the belt tension by using an allen wrench in the holes on the end of rails. Tighten 1/4 turn on each side and see how the tension is. Repeat another 1/4 turn if necessary.

Nov 29, 2010 | Epic Overstock T60 Treadmill Treadmills

1 Answer

Epic treadmill t60 is stuck in max incline how do


Usually when stuck at the max up position it indicates that you may need a new incline motor. It is not the sensor. I have been repairing treadmills for 15 years and incline sensors seldom if ever go bad. If can isolate the incline motor using a 110 volt power cord, this may un-jam the motor and get it back down to 0%.
I use www.treadmillpartszone.com for parts.

Jul 25, 2010 | Icon Epic T60 Treadmill

1 Answer

My epic T60 will go great for 10-15 minutes and then


These treadmills have what is called a thermal switch. It is designed to shut the machine off if it gets too hot. To help this problem you can purchase some treadmill lubrication. It is a waxy based substance that you put on the underside of the walking belt. That is the most inexpensive alternative. You may need to purchase a new walking belt. How you can tell if yours needs to be replaced is to put your hand on the underside of the walking belt. You should feel a texture like a screen door if it is in good condition. When you pull your hand out it should feel like you have been eating popcorn, a little greasy. This will prevent the overheating problem and not shut your machine off in the middle of workouts.

Apr 05, 2010 | Epic Overstock T60 Treadmill Treadmills

Not finding what you are looking for?
Icon Epic T60 Treadmill Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Icon Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Alienware X51
Alienware X51

Level 1 Expert

15 Answers

Are you an Icon Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...