Question about Whirlpool AWOE8748 Front Load Washer
Not starting, only click sounds coming with F18 error code
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Modle AWO 9561 In the second
Hi from retired Englishman in SW France,
Whirlpool's 'FH' stands for 'no water inlet'. Presumably the second cycle is rinsing (?) and that requires cold water as opposed to hot for the first (wash) cycle.
If you have checked that the hot and cold water taps are turned on fully and the hoses are not kinked or squashed at the back, it is worth while checking both the hot and cold water inlet filters. Turn the taps off and remove both hoses at the washer end. Inside each inlet port there is normally a little filter which should just slide out. Clean if necessary and replace each one and the hoses. If after turning the taps back on there is no improvement, the problem is symptomatic of a malfunctioning hot or cold water control valve. Sorry but it needs a service call and a check that it isn't the control PCB ;-0(
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck,
Posted on Aug 17, 2011
The warning light comes on because the machine "thinks" that something is wrong. Since it stops on and off something is wrong.
Why not phone the Whirlpool service in your area and tell him aboout this and ask what you can do??
give it a try
Posted on Feb 22, 2012
Tips for a great answer:
Jan 28, 2016 | Whirlpool Washing Machines
Feb 22, 2012 | Whirlpool Washing Machines
Nov 11, 2011 | Washing Machines
Aug 17, 2011 | Whirlpool Washing Machines
Dec 29, 2010 | Washing Machines
Dec 09, 2010 | Washing Machines
Mar 21, 2010 | Hotpoint Washing Machines
30 people viewed this question
Usually answered in minutes!