Question about KLH Audio Players & Recorders
It could be just a lead, check your lead heads and inserts are clean.
Check along your leads and wires for any obvious kinks / tight bends / cuts / nicks / something sitting down on it or any damage to the wires.
It could be there is another electrical device nearby interfering at a electromagnetic level.
It could be just the dials / knobs need taking off and cleaning in behind. the pickups, you may not need to remove them just spray with electronic cleaner this stuff is great for lots of different electrical cleaning problems.
Posted on Feb 10, 2014
Testimonial: "I didn't even think of the electromagnetic interference...I will definitely check that next time I'm home in about a month. Thanks for the suggestions!"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: surrond sound
For Stereo Mode (Front L & R Speaker), you must plug RCA cables (match up red and white) from Output on DVD player to DVD Input on the back of the receiver. Then with speaker wire, run from receiver speaker output (Front Speakers) to designated speaker (make sure + and - match up to both input and output). As for hooking up surround sound, I'm currently trying to figure that one out with just using the L, R and Center. I don' t want wire running all over the place just for rears. Hope this helps
Posted on Sep 06, 2007
SOURCE: klh model 52 audio receiver
Open the receiver and locate the potentiometer for the volume. There should be small openings in which you can spray electrical contact cleaner. The spray can be found at any electronic supply store (Radio Shack). Make sure the product says no or zero residue. I use a product called "Electrosolve". After spraying, immediately rotate the pot back and forth a few times. You may need to repeat this process two or three times. You might as well hit the other controls while you're at it. If several attempts don't eliminate the problem, the pot will need to be replaced.
Posted on Oct 11, 2007
SOURCE: connect R5100 to DVR/Monitor
use component audio to the HDTV and optical audio to your KLH reciever. The component and optical are always active at the same time. I work for TWC if you have more questions.
Posted on Aug 08, 2008
could be 2 things....
1) The receiver could be set to feed the right speaker with more volume. Check the volume setting for each individual speaker on the receiver.
2) The cable connecting the left input from your dvd player is not connected properly or is bad. Try swapping the left and right audio input cables to see if this moves the problem to the other side. If it does - get a new cable.
Posted on May 12, 2009
Tips for a great answer:
Dec 20, 2011 | KLH R5100 Receiver
Nov 07, 2011 | KLH R5100 Receiver
Nov 01, 2011 | KLH R5100 Receiver
Nov 01, 2011 | KLH R5100 Receiver
Sep 08, 2011 | KLH R5100 Receiver
Jul 21, 2010 | KLH R5100 Receiver
May 12, 2009 | KLH R5100 Receiver
Dec 05, 2007 | KLH R5100 Receiver
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: