Question about D-Link AirPlus DI-524 Wireless Router

1 Answer

Connect to wireless D-Link and Westell6100

Unable to connect to internet with wireless D-link and Westell 6100.  Tried to reset.  Computer unable to connect to continue.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 20 Answers

I am assuming that you have a functional LAN cable connecting the Westell and the DI 524, right? If you are unsure, replace it with a cable you know is good.

If the 524 is turned on downstream of the Westell modem, it should find what it wants. You may try rebooting the Westell and seeing if the 524 finds it, and you maybe should reboot the 524.

Sometimes, when the world gets jiggered up I have to work pretty hard to get my DI-524 resync'd to my DSL modem.

Posted on Oct 27, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The web configuration website for my dlink 615 is not available. ive tried over and over again to connect to it but keep saying that internet explorer is unable to load this page

If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-

Jun 03, 2011 | D-Link DIR-615 Wireless Router

1 Answer

Westell 6100 connected to a wireless router; wireless internet connection works but ethernet cable connections for desktop and PS3 will not work, even tho the desktop says its connected. This started after...

You have to make sure that in PS3 you select Automatic Configuration under Network Settings.

In Westell 6100, you have to make sure that there is "DHCP" configured on it. You have to access it via web interface and check under IP configuration or so.

Let me know if you want the detailed process for this.

Mar 12, 2011 | Westell Wirespeed ProLine 6100 Router...

1 Answer

I recently reset my Westell modem (6100 series) when putting a password on my wireless network, and now I can't get the modem to connect to the internet again. The ethernet light is on, but without the...

It probably isn't connect to the outside world. It doesn't know what IP to use on the outside. Call your ISP and see what your IP or if you should just keep in on dynamic and have it autopick up a IP.

Feb 28, 2011 | Westell Wirespeed LiteLine 6100...

1 Answer

I have another computer i want to install in the up i need another dsl router to connect to it????.

If you have a Westell 6100, it's just a modem meant to connect a single computer to the Internet. It has the jack where you plug in the cord to your DSL phone line, and an Ethernet jack so you can plug in your computer. You can't have more than one of these connected to the phone line because of address conflicts that would result.

What you need is a wireless router so your Internet connection can be shared by several computers. Most service providers are installing Westell models that combine the modem and a 4-port wired/wireless router for new customers now. Since you have the modem only, you'll need to supply the router. The wireless function lets you use the upstairs computer without having to run a network cable to connect it. That's much cleaner and simpler. There will be four connectors on the back of the router for wired computers or other things (such as a network printer) you might want to connect. You still have only one connection to your DSL line, but now you can hook up several computers at once.

There are several companies making wireless routers and they all do pretty much the same thing. Netgear, Linksys and D-Link are the most common, and you can buy a wireless router at almost any retailer that sells computers. You can also find them online from companies like TigerDirect or Newegg. Other than staying with one of the major brands (it's easier to find support for those if you need it), there's not much to recommend one kind over another.

It's pretty easy to install a wireless router and set up your wireless network. They all come with a CD containing setup software that will guide you through the process. You'll have that upstairs machine on line in no time.

Dec 05, 2010 | Westell Wirespeed LiteLine 6100...

1 Answer

How do i connect my verizon dsl westell 6100 to my belkin g rtr?

Wellll....since it seemed an impossible task, I tried the next best thing.
I bought a wireless adapter for the other pc and voila! they are on the internet, and I am returning the router.

Westell modem + Verizon DSL w/usb = No connection to router.

Dec 28, 2009 | Belkin Wireless G Plus MIMO (F5D9010)

2 Answers

I have a dlink router and I want to connect my usb modem to it

is this an additional router?

Verizon are issuing modem with built in wired and wireless modem.

Try this;
How do I properly set up a D-Link Router with a Westell Modem? (#7125)
This FAQ is for setting up a BellSouth supplied Westell 2100/2200/6100 modem (Models A90-210030-04, B90-220030-04 and B90-610030-06/C90-610030-06, respectively) with a D-Link DSL router. Although actual screen shots vary throughout the DLink line, the instructions below are applicable to all models. Important Note: These procedures and pictures are based on the most recent firmware for the Westell. Other Westell firmware menus and screenshots are slightly different but the bridge options and functions are still available. It is highly recommended that you click here and update your Westell firmware.

This FAQ has 3 Major sections:
Section 1 - Overview
Section 2 - Westell modem configuration
Section 3 - D-Link router configuration information
Section 4 - Connections and power up

Section 1 - Overview
bred.gifImportant Note: Due to some known operational issues it is VERY important that you have the latest firmware on your D-Link router. Please go to the D-Link Support Site for firmware updates.
bred.gif The best configuration for networking a router with the Westell is to set the Westell to "Bridged Ethernet" mode and allow the router to do the routing and DHCP functions. The Westell is also a router with full DHCP functions and may not function correctly when connected directly to another router. Not changing the modem to Bridged Ethernet will result in double NAT'ing, increased latency, possible IP conflicts, or possibly a network that doesn't work at all.
bred.gif Before proceeding both the modem and router should be set to default. Despite what the help desk tech tells you, resetting the Westell does not put it into Bridged Mode.
bred.gif The BellSouth Installation CD and Connection Manager are not required to use this configuration.
bred.gif Since BellSouth assigns static WAN IPs via your username the configurations shown are applicable to both dynamic and single static IP customers. Select dynamic PPPoE regardless of your setup.
bred.gif You must connect the Westell directly to the computer's NIC to make the necessary changes before you connect the router, because you will be unable to access the modem interface after you connect the router. The reason is that the modem interface is which is a local IP. By default, most routers do not have the capability to route a local IP out of their WAN port (where your Westell is connected). Additionally, they may be on completely different subnets. After you have made the changes to the Westell you can then connect the router and configure it for use with FastAccess. There are several alternatives around this problem. One method involves extra equipment (second NIC and a hub) and major configuration changes. The second method requires you to utilize the router as a simple switch and use the Westell's PPPoE and DHCP functions. Click here for more information.
bred.gif If you encounter any problems simply reset the Westell, connect it directly to your NIC, restart your computer, log into the Westell interface, and start over again.
bred.gif More information about the Westell is available here.

Section 2 - Westell Configuration
bred.gifStep 1
Verify that your NIC card is set to "Obtain IP Address Automatically". Completely power down the Westell and the computer(s). Power up the modem and press the reset button on the back of the modem. After the modem has fully initialized connect the Westell to the NIC and then power up the computer.

bred.gifStep 2
Open a browser session and enter in the URL address field to access the Westell interface. If you are unable to access the interface make sure your NIC is set to "Obtain an IP address automatically". This may require you to reboot the computer (or release/renew) to obtain a proper IP.

bred.gifStep 3
Click on Broadband DSL Line from the top menu. Click on Configure Connection from the right menu. Select "Bridged Ethernet" from the Protocol pull down. Click on Save and restart the connection at the bottom. This will automatically restart the modem and the interface will return after the changes are saved. Note: functions like NAT, DHCP, IP Passthrough, and username and password will be disabled or irrelevant and can not be selected. After the modem has restarted, power down both the computer and the modem then physically disconnect the Westell.

Section 3 - D-Link Router Information
bred.gifStep 4
After the PC is powered down connect one of the router LAN ports to the computer NIC and power up the router and then the computer.

bred.gifStep 5
Use the following steps to configure your D-Link DI-604 Router. Important Note: You must use the format for your username. If you do not add "" after your username you will be unable to connect to the internet.

Section 4 - Connections and Power Up
bred.gifStep 6
Power everything down and physically connect the Westell, the router, and any computer(s).

Westell 2100 shown. Pictures by Andy Houtz

bred.gifStep 7
Power up the network equipment in this order:
•Westell Modem (wait till the Ready light is a steady green)
•D-Link Router
Open a browser session and go surfing!

bred.gifAdditional Imformation
•You should check your tweak settings to optimize your new network. Reminder: If you are required to change your MTU, make sure that it is identical on all equipment (PCs and routers) in the network. For more information about changing MTU on a D-Link please click here.
•The 6100 has an "Internet" light that is green whenever there is an active PPPoE session initiated by the Westell. Since you are using the DLink to establish the PPPoE session the light will stay off. This is normal.

Mar 13, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Verizon Westell 327w modem cannot connect to internet

hi. i work for verizon tv, internet and phone. and the tech was wrong. it is the unit it self how old is it?

Aug 07, 2008 | Westell Wirespeed VersaLink...

2 Answers

Setup DIR-655 w/ Westell 6100 USB DSL Modem

First check if your computer can get on the modem with an Ethernet ( This is to find out if your router will work with your modem) If you cannot get on give your ISP a call to have them configure the modem for Ethernet connection. If you do get on then connect the router to the modem and your computer to the router. You can run the CD for the router or do the connection manually.

Jul 27, 2008 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

Internet conection

Modem buying tips Introduction Standards Interface Connection Internet availability .... price if card is a combo card (modem / NIC) or if the card is a ( wireless solution).

Good Luck, Please dont for get to Vote/Thank You.

Dec 17, 2007 | Westell Wirespeed LiteLine 6100...

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18417 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides