Question about Buyers Products BOSS Snowplow Heavy-Duty Plow Center Shoe Assy. 1304712

Open Question

How to put back together the boss plow motor - Buyers Products BOSS Snowplow Heavy-Duty Plow Center Shoe Assy. 1304712

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My straight blade Boss snow plow is stuck in the angle right position. I hear a solenoid click but no movement. Plow goes up and down with no issue.

seized cylinder?
When you go to angle the Blade can you see the Hydro Hoses jump a bit as though they are trying to flow fluid?

Dec 10, 2017 | Garden

1 Answer

Boss v plow won't lift. Replaced motor and valve control. Lifted twice and quit. Now what do I do?

Check electrical connections to the Lift Pump. I'm not impressed with Boss's wiring

Jan 13, 2016 | Boss V-XT Poly Snow Plow

1 Answer

The smart cylinders don't hold while pushing snow. Can they be adjusted?

Is this is forward or just Back Blading? I think BOSS has an option for Holding while back blading that perhaps you didn't purchase

Aug 13, 2015 | Boss V-XT Poly Snow Plow

1 Answer

On my boos plow lights the shield over the low eam light comes loose and breaks the bulb. this has happened three times on the right side and once on the left

try putting them back with a dot of silicone caulk in the corners (dont seal the entire thing) i had a snowmachine that was allways loosing its headlamp and i did this , never came out again

Feb 25, 2015 | Boss V-XT Poly Snow Plow

1 Answer

My plow won`t go up or back forth

hope it help!

Feb 13, 2015 | Home Plow by Meyer Snow Removal. 6 ft. 8...

1 Answer

Dash board lights flicker'd truck stalled? moved battery connct's started up,done it twice.

Clean and re-tighten the battery connections.

Best to take off the negative battery connection, when working with those wires.

Nov 12, 2013 | Dodge Ram 2500 Cars & Trucks

1 Answer

I have a 2003 f-250 with a curtis sno-pro 3000 hitch n run plow system. when i go to lift plow or go left or right it kills the truck. the light shut off and every thing else as soon as i hit any of the...

I think you have a problem with the plow motor grounding out. when you raise or turn plow in either direction you have to run the plow motor which is grounded out. ( as in hooking the ground and positive together directly ) the plow is on a gravity drop when you let it down by the weight itself and does not require the motor for the plow to operate. It's your plow motor or the positive feed to selonoids.

Feb 05, 2011 | 2003 Ford F250 Super Duty Crew Cab

2 Answers

NO power wont lift

boss plow will not go up or down, do not have light on main control. Truck lights will go on but when toggle switch is activated, truck lights stay on and plow lights will not go on.

Jan 28, 2011 | 82" TruckSUV Snow Plow

2 Answers

Snow Bear Winch..... Will not pick up plow at times. Motor seems strong drum will not turn,,,slips. Is there a replacement part available without buying an entire winch? Thanks

Hi there, I had the same problem, my winch has a chain to lift the plow.I put oil on the chain to keep from rusting and thats what started my troubles.So I took the mount off that holds the chain on the winch and there's a brass piece that is squeezed behind it.Cleaned and tightened it and works fine now. If you take motor off winch to check gears[ DON'T USE GREASE] when reassembling! When its cold it doesn't want to turn, just use motor oil or spray lube

Jan 19, 2011 | 82" TruckSUV Snow Plow

Not finding what you are looking for?
Buyers Products BOSS Snowplow Heavy-Duty Plow Center Shoe Assy. 1304712 Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buyers Products Boating Experts


Level 3 Expert

696 Answers

ray gallant

Level 3 Expert

51587 Answers

Fabrice Wolters

Level 2 Expert

331 Answers

Are you a Buyers Products Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides