Question about Kitchen Ranges

1 Answer

Ge range model #JSP42BK4BB

Oven will not work .F7 appears, I have unplugged it, check elements

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 473 Answers
Re: Ge range model #JSP42BK4BB

F0 - F1 - F7 Stuck keypad may mean relay is turned on. Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.
F0 or F7 Shorted Clear/Off Key due to membrane switch, control or connector Shorted key panel membrane switch; Check Electronic Range Control (ERC)

F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

These are the codes for ge depending on the model.

Posted on Oct 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Getting a PF7 code with beeping on my stove. Reset breaker, didn't fix it. Any help would be appreciated.

GE oven error code "F7" and how to fix it '
Jun 23, 2007 - The error code "F7" will be displayed along with a beeping sound if the ERC (Electronic ... We have a GE Spectra Oven - GAS - we keep getting F7 errorcodes and the oven will not heat. ... In my case it was the keypad.

Why is my GE Range model number JBP80SM2SS making ... > Manage My Life > Questions
Apr 6, 2010 - Get shopping advice from experts, friends and the community! I was boiling water on back burner of ceramic stove top GE range Model ... When anyappliance picks up an error code or starts beeping the problem that caused it ...

Jan 08, 2016 | GE Profile 30" Self-Cleaning Slide-In...

1 Answer

Receiving F7 error code while cooking turkey model # GLEFM397

FIXED GE Profile Oven F7 error messages - ApplianceBlog

Jan 13, 2006 - 10 posts - ‎2 authors
My GE Profile built in convection/thermal wall oven constantly flashes F7 errormessages. ... Three of my neighbors and I have the same GE profile double oven (new home development) and we've all have the same problem as you described-F7. ... GE Oven F7 error message solution. LG Electric oven not heating. F7 error code
2 posts
Jun 9, 2015
FIXED Kenmore Double Oven error code F0 and F7
10 posts
Aug 31, 2010
More results from

Nov 14, 2015 | Frigidaire Kitchen Ranges

1 Answer

F7 error code on GE gas oven model # JGBP90MEA2BC

On this model, code F7 means there is a keypad malfunction, and therefore the range's "computer" isn't getting a valid signal from the keypad. It may be a stuck "touch-key", a bad connection between keypad membrane and the range/computer connector, or more probably a faulty keypad membrane.

In some cases it can be a defective computer module. You can test whether the problem is the keypad or computer unit by disconnecting the keypad entirely. If an error code F7 still shows, then the computer is faulty.
If this was helpful, please rate via the helpful button.

Nov 04, 2014 | Kitchen Ranges

1 Answer

Heating element in the oven appears to burn out, can it be repla

yes but be sure to turn the breaker off or unplug the stove cause the element has power on it on one side all the time and will short out when you take it out. you should see a screw on the plate that the element is attached to in the back of the oven that is how you get it out..

Sep 27, 2009 | GE Spectra JBP78 Electric Kitchen Range

1 Answer


Unplug the range.
Remove the oven racks.
Remove 2 screws holding the element to the back wall.
Slide the element towards you carefully. Remove the wires and install them on the new element.
Reattach the element to the back wall.

Mar 06, 2009 | GE Spectra JBP78 Electric Kitchen Range

1 Answer

GE profile gas stove over does not work....F7 D8 on screen

spectra stove and it is beeping and reading f7 we have unplug it and replug please help me

Nov 20, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE Profile Gas Range oven turns off

I just read that the electronic panel malfunctions due to rear burner use. Now, I know that mine gets REALLY HOT in between the back burners (where the heat exhaust for the oven is) whenever I bake/broil. I am guessing that it can cause the same malfunction fromt he oven, as with the backburners. Whenever I use both back burners, mine shows F7 E6, too. Unplugging it for the night or just waiting til the beeping stops and then clearing it works... until I cook again. I read that the replacement part for the control panel is about $300 and another $200, more or less, to install it! I think this is more like a recall or manufacturer's problem. I have read plenty of complaints and I think GE needs to make a call to fix them!!

May 12, 2008 | GE Profile Spectra JGBP79 Gas Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

1,162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Barrett Palumbo
Barrett Palumbo

Level 2 Expert

1772 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides