Question about 7752V Replacement Transmitter Supercode Remote for 5901 Responder LC3
On my 5701viper remote I can hit the f button 3 times and the unlock lights would flash 9 times.does 7752v have this feature?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this usually means that the remote did not recieve a signal back from the module or the module did not recieve the remote signal
have you tried repeatively to press the unlock button? does the remote starter work or aux( trunk ) ?
also when putting the battery in the remote , be easy because there is a connector plug soldered on the board real close to where the battery is , and if it is hit by the battery hard enough it will cause those solder connections to disconnect and you will get the beeps and or other malfunctions
Posted on Feb 03, 2009
SOURCE: VIPER 5701 remote how tofix?
you have the key pad lock turned on. It protects the keys from unwanted pressing when in your pocket. To unlock you hit the F key then the unlock key, you can now use any command untill you let it set for 60 seconds, then it locks again.
to stop this totally, u hold down the F key for 12 seconds it will beep and top light turns orange, then hold down the unlock key for 2 seconds, it beeps then u hit the lock key to turn off this feature (top green light goes out). then hold F down, and F down again, should b good to go!
Posted on Jul 14, 2009
Did you get help? My problem is similar but not as bad. My viper550ESP no longer remotely unlocks the doors (well very, very occasionally it does). That is the only problem.
Posted on Nov 25, 2009
Tips for a great answer:
Aug 08, 2013 | 7752V Replacement Transmitter Supercode...
Jan 24, 2013 | Remote Start System
Dec 03, 2012 | 7752V Replacement Transmitter Supercode...
Aug 20, 2012 | 7752V Replacement Transmitter Supercode...
Jun 06, 2011 | 7752V Replacement Transmitter Supercode...
Feb 08, 2011 | 7752V Replacement Transmitter Supercode...
Programming the Viper Remote Starter 5101
Unlock the doors before starting
Push and hold f button for 8-10 seconds until amber light is on solid
Push Remote start button for about 4 seconds till amber light flashes 3 times
Put key in IGN to the on position but don
Dec 12, 2010 | 5101 LE 1 Way Car Remote Starter System
Nov 21, 2009 | 5701 VIPER 5701 2-WAY ALARM w/REMOTE START
226 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: