Farberware Microwave Oven

Good afternoon Chris.

To set the clock:

1. Push the [Clock] Button
2. Enter the time with the keypad. For 8:37, type 8 3 7 for example.
3. Touch [Start/Enter]
4. Press [1] for AM, [2] for PM.
5. Press [Start/Enter] again to finish.

You can download the manual on this page at the LG website:


http://www.lg.com/us/support-product/lg-LMVM2085ST
Hope that helps, and good luck!

calvin,
If you have access to where your microwave is plugged in, unplug it for a few minutes and then plug it back in. This will reset your contol panel. Then follow your book directions to reset the time on the clock. Hope this helps!

The computer died. Not much you can do with it. After ten years it doesn't owe you anything.

Of course you could bypass the whole timer with a toggle switch if you were MacGyver.

Push the CLOCK button.
Then enter the current time with the number keypad.
Then push CLOCK again.
Done.

Ya those are a classic, really made tasty baking with convection heat but think it is old machine. Could be just a bad chord as unit runs about 12 amps. Like space heater, if they loose some connection start to make chord not good. I would look for another. I've seen a China one for around $100, and built-in ovens at Habitate for Humanity retail store with that feature for reasonable. Good to fix but when dealing with high amp points, they will wear out as they do with space heaters often.

Hello ebrunsw. Generally to set the time you push clock and then set the time AND then push clock a second time. Joe
Thanks for choosing Fixya!

hello there:
to set the time on you're micro wave you will need to push the clock button and use you're number pad to enter the time and once you have got the time set properly you will need to press the clock button again.... hope this helps you out sincerely D.Jones

Good Morning,
Unplug the oven and wait 3 minutes then plugit back in and check to see that it operates normally. Do not run the oven empty - place a cup of water in it. Let me know if this helps and thank you for using FixYa!

In case your owner's manual is missing, you can download it here.

If you're still having trouble after consulting the manual, please reply back.

The ceramic turntable (actually ceramic coated metal) will be fine as long as it doesn't have chips or cracks where arcs can occur.

Also, for even heating and longer turntable life, don't place your food in the center, but slightly off-center instead.

If you need to order a new turntable, enter your full model number JES1290SK here http://tinyurl.com/gv383

We're happy to help and we appreciate your thoughtful rating of our answer.

I have this model. Press clear then press Auto/Clock. Enter in the time eg 700 then press Auto/Clock again. The time should now be set