Question about Office Equipment & Supplies

Open Question

Optoma hd25 green light blink

No light power off then power on

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: optoma ep719

There is a stuffed 10v 3300uf capacitor on the power board. You need to replace it.
Bellow you can check in the picture where the capacitor is located.
0f5b76c.jpg
Notice that in this picture I have already took the bad capacitor out and replaced with two small cords to reach the bottom and test the new capacitor.
To reach this place is not fast, several layers of plastic and metal must be removed, but is not a hard task to take the capacitor out and replace it for another.
It works just great! Now it is back on track with awesome image.

Posted on Oct 03, 2009

projdoc
  • 2236 Answers

SOURCE: optoma projector

i'd say power supply issue, but the led is blinking green. this means that it thinks it's in warmup/standby mode. but if nothing's running, the main board might be bad and needs to be replaced.

Posted on Dec 02, 2009

  • 1 Answer

SOURCE: Optoma EP719 lamp does not come on

I have the same problem. The 10V 3200uf capacitor is bulged. Can't find one on the web. Where did you get yours?

Posted on Apr 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

An Optoma GT750-XL ,


GREEN BLINKING LIGHT stand for power on warming or power off cooling.

Dec 13, 2014 | Optoma GT750-XL - DLP projector - 3D 60403...

2 Answers

Why would my projector refuse to start with a seemingly intact light bulb?


If you only have 300 hours on it it should still be under warranty. Before doing something to void that I would check with Optoma techs.

Jul 23, 2014 | Optoma HD20 DLP Projector

1 Answer

Optoma 25hd air filter issues


Hi Cathy,

The replacement of the filter is something that needs to be done at a service center by a trained technician. If you are interested, feel free to send us a message: Projector Repair Bulb Replacement

Jan 16, 2014 | Optoma HD25-LV - HD 1080p 3D Home Theater...

1 Answer

Optoma gt750


Just use a different power supply cord fixed mine hope this helps

Aug 26, 2012 | Optoma Office Equipment & Supplies

1 Answer

Optoma HD66 replaced lamp, LAMP WARNING light keeps flashing, still won't turn on?


i just had the same problem i took the top of the projector off and cleaned the color wheel and sensor seemed to have fixed the problem that is for now. seems to happen to me once a year on the dot but last time it was warranty. good luck hope it helps.

Mar 17, 2012 | Optoma Office Equipment & Supplies

1 Answer

Optoma H30 -- When turning on projector the green light on power button blinks and the projector sounds like it is going through a cycle....after the cycle the lamp light comes on and nothing comes on the...


If the lamp light is orange then the lamp ballast circuit or power to it is no good.

I presume the lamp is not on at all, and it's not the hide function that is stopping the light coming out.

Mar 10, 2011 | Optoma H30 Multimedia Projector

1 Answer

Hello. I have optoma ep716 with problem: 1. When I power it on the green blinking for 20-30 seconds and after this stays green. Due to manual it's meaning that projector on however lamp does not provide...


hi,
Do one one thing. check the lamp of your projector. For removing the lamp see the bellow picture.
also check the lamp colling fan. If it is faulty this fault can occur.

ajin_g_34.gif

1. Use a screwdriver to remove the screw from the cover.(1)
2.Push up and remove the cover.(2)
3. Remove the 2 screws from the lamp module.(3)
4.Pull out the lamp module. (4)
ok

Feb 16, 2011 | Optoma (BL-FU180A) Projector Lamp for...

1 Answer

Optoma Projector power LED is blinking green,funs are not working, lamp not function, how can i solve this problem


i'd say power supply issue, but the led is blinking green. this means that it thinks it's in warmup/standby mode. but if nothing's running, the main board might be bad and needs to be replaced.

Dec 02, 2009 | Optoma HD65 DLP Projector

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...