Ge spacemaker wsm2420tazww

Claim on the guarantee as it has happened within the warranty. You need a new Water Inlet Valve. The solenoid isn't closing shut. The other possibility is that your home water pressure is too high. A plumber can test that and fit a pressure reduction diaphragm.

https://www.google.com/search?q=ge+spacemaker+model+gud27essmww+water+inlet+valve

..

GE Washer Not Agitating Repair Guide

www.appliance-repair-it.com/GE-washer.html

If your washer will not agitate or spin take a look at this page GE Washer Not ... If the washer fills up with water then doesn't do anything at all and you do not hear ... if this were the problem, the water would not stop running, over-filling the tub.

GE washer spin cycle not working - ApplianceBlog

www.applianceblog.com/.../217-GE-washer-spin-cycle-not-working

Mar 12, 2005 - 10 posts - ‎3 authors
I have a GE "Spacemaker Laundry" (Stackable) model number ... Today it filled withwater initially then stopped working all together when it ... Bad motor, something jammed/seized up holding the motor back from running?

I am under the understanding that GE and other manufactures have discontinued the 36" microwaves you may have to purchase a trim kit to fill the space from a 30" unit.

still under warranty call the factory,

I think you have the worm gear worn. Even the motter is okay. It comes with all things together, so just replace the moter .
Thanks
Please rate me

Thanks for choosing FixYa and welcome. This sounds like a problem with the water level switch in the washer. It controls the amount of water entering the tub. It is probably defective. You may want tomake sure the switch is getting power first by testing the wires with a voltage meter.

GE Will replace the magnetron for 9 years! Mine is a 2004 model with a one year warrently according to manual. HOWEVER they did say the magnatron was covered for nine years: call 888-239-6832. When I called they said thats all they get calls for and would send out in 3-5 days. NO CHARGE. I had to ask if there was coverage longer than a year on major parts and that's when they offered the info and I eventually was transferred to the right office. Saved $120 bucks on parts alone.

try replacing your water selenoid coming in. remember it isnt a mechanical timer it is a computerized timer, so if the selenoid isnt the problem, it might be the computerized timer. computers are very finicky, pain in the a- -!

i was using a defective extension cord, the machine should trip when start it . and beep with no other message on the screen

Make sure the drain hose is not kinked