- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
at the top of the control box there under a sticker or in a small hole there should be a 7/16th nut you can use to lower the lift manually. but could be a power issue trace the line from the battery source. If the power checks out and you are getting 12 volts to the control box it could be the switch or the motor to rule out on of these you can disconnect the motor cable and apply direct power to it if it moves up or down then you know its not the motor which could only mean it is the switch. (when applying direct power to motor if it does not move when you put red on red and black on black then reverse them red on black and black on red.)
Did you ever figure out how to replace the wheels on your Harmar stair lift? I think I got the same problem, but can't find where I can buy the replacement wheels? Can you help? email@example.com
Hallo, mayby late but I had last month the same problem. When you open the electric board wirh the rubber cover. It's on the side of the lift. When opend by the 4 screws you see the board. On the left side there is a red block with I think 6 or 8 white mini switches. First take a picture of the standing of these switches. After this you switch every switch a few times. After this your rotation will work again. It's ocydation of the switches. Succes. John from Holland.
Did you install the wire harness for the lift? It goes from your battery to the lift With out that harness you cant plug in the lifts 2way the 4 wire is for the lifts lic. plate light,is your escape a new car and lift was used on your old car if so you need to get a new lift harness