Question about Panasonic TH-42PX600U 42 in. Plasma HDTV

Open Question

When listening to TV thru the stereo, the volume output is reduced dramatically.

The Setup - Currently connecting Panasonic TH-42PX600U 42 in. Plasma HDTV, Pioneer VSX-1020 Receiver, and Cisco ISB7500 IPTV Receiver (cable box) supplied by ATT-Uverse and is part of a bundled TV, phone and internet service (phone line connection). Before switching to ATT I had TV, phone and internet bundled thru coax cable AND THIS PROBLEM DID NOT EXIST! The connection: Cisco cable box to TV via HDMI cable, TV to Receiver via fiber optic. No other components connected. The Problem: When playing stereo, volume is at correct volume output, but when running TV thru stereo, volume output is reduced dramatically. Also, unless TV is unplugged from the wall, the fiber optic light in the cable stays on. Why? When plugging a fiber optic cable into the other port of the stereo receiver, the fiber optic light within the cable does turn off when you turn off the unit. How can I regain the normal volume output when listening to the TV thru the stereo

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Volume Problems: Panasonic TH-42PZ700U

please could you send me tips of what the problem of my plasma keeping stuck pixiel panorama LCD Tv model 42LC68T

Posted on Mar 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service menu tv 42px75u


Sounds like an issue with the remote. Try other functions, too. You may need new batteries.

Nov 30, 2013 | Panasonic TH-42PX600U 42 in. Plasma HDTV

1 Answer

I have a TH-42px600u & there is no power going to it, the power cord is working, but the Tv is getting now power. Is there a fuse I should replace or a reset button? Help PLXX!


Of Course there is a fuse at its main power regulator board. but, you must have sound knowledge in electronics, to replace it, especially to Plasma displays. If you wish to get more details, check the site linked here. If you have confidence, follow. http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Sep 14, 2013 | Panasonic TH-42PX600U 42 in. Plasma HDTV

1 Answer

Panasonic th-42px600u high pitch sound


likely a coil or small transformer in the set is vibrating hard enough to make it squeel, it would have to be located with back off by listening to see where it comes from.

cure would be to replace the entire board it is on or hot glue the part that is causing this to dampen the sound.

If it is coming from the front screen unit that is a more serious issue.

Dec 23, 2012 | Panasonic TH-42PX600U 42 in. Plasma HDTV

1 Answer

I have a Panasonic TH-42PX600U and the RF board displays a red light and the screen says no channel found. Can I change the board myself, does it just snap into place


if you have the right tools then you can do it, make sure unplug the tv unit first while replacing the board. then mark or put a label to the connector that you were disconnect not to interchange that can cause of damage to the other board.

Sep 17, 2012 | Panasonic TH-42PX600U 42 in. Plasma HDTV

1 Answer

How to setup picture in picture function on my tv. panasonic viera 42-px600u


This is controlled by the Split and Swap buttons on the remote; the size of the second picture can be adjusted with the Aspect button. First press split and use the Input button to select the source of the right picture of the split screen (TV channel or video inputs). Then press Swap and use the input button to select the source of the second screen. Swap again if desired or press Aspect to change the size of the main screen window. However, it is not available if you are using the HDMI, PC and SD Card viewing mode. Since the TV doesn't have dual digital tuners, you can't watch two different digital channels on the split screen.

The manual for the Panasonic TH-42PX600U is available from from Panasonic here: http://www2.panasonic.com/consumer-electronics/support/Televisions/Plasma-HDTVs/model.TH-42PX600U . See page 18 of the manual, page 10 of the PDF.

I hope this helps.

Cindy Wells

Mar 14, 2011 | Televison & Video

2 Answers

I need a manual for the panasonic t.v. th 42px600e


user manuals here http://www2.panasonic.com/consumer-electronics/support/Televisions/VIERA-Plasma-HDTVs/model.TH-42PX600U
direct link to the manuals
  • http://service.us.panasonic.com/OPERMANPDF/TH42PX600U-MULTI.PDF
  • http://service.us.panasonic.com/OPERMANPDF/TH42PX600U.PDF
  • If this solutions solves you problem, please do not forget to rate my solution.
  • If not, then please comment back so I can help some more

Apr 03, 2010 | Panasonic TH-42PX600E 42 in. Plasma...

1 Answer

Volume Problems: Panasonic TH-42PZ700U


please could you send me tips of what the problem of my plasma keeping stuck pixiel panorama LCD Tv model 42LC68T

Mar 29, 2009 | Panasonic TH-42PZ700U 42 in. Plasma...

1 Answer

No power


I would guess it's the power unit for the TV itself.

If it's still under guarantee I would have thought you should be able to get it replaced.

Feb 19, 2009 | Panasonic TH-42PD50U 42 in. Plasma EDTV

1 Answer

Does model th-c42hd18 require only a panasocin wall mount bracket. Seems others do not work


I am not familar with your exact model but my Panasonic TH-42PX600U 42 in. Plasma uses a generic brand wall mount. The first mount I bought would not fit so I returned it and bought a different brand which worked well. Start shopping your local stores (even walmart has a couple of different types to choose from), carefully open the packaging in case you need to return it and see if it will fit the mounting holes on the back of your TV. If it fits on the back of the TV then you should be good to go.

Jan 11, 2009 | Panasonic TH-42PX600U 42 in. Plasma HDTV

Not finding what you are looking for?
Panasonic TH-42PX600U 42 in. Plasma HDTV Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5020 Answers

The Knight
The Knight

Level 3 Expert

73698 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...