I've done an exhaustive search of your data base and haven't found this problem with this model. At the end of the cycle the washer gets stuck in the slow tumble phase. The door stays locked and I have to manualy stop the Washer then wait for the door to unlock. If it makes any differance I've also had to replace the resitor that burns out for the spin cycle to work
It sounds like your timer needs to be replaced. The timer runs the washing machine in a pre-determined pattern. It provides the electricity to all of the washing machine components at the correct time and for the correct length of time.
Was this helpful?
Yes
No
1 person thought this was helpful
Popular Solutions for Maytag Neptune Front Loading
We have a Maytag front loading washer purchased in 2005. We have a problem with black flakes about...
(More)
We have a Maytag front loading washer purchased in 2005. We have a problem with black flakes about 1/16 to 1/8", coming out with the clothes when removed from washer. We shake the clothes and have to vacuum floor after each load. We use he detergent as recommended. What can we do?
Is it normal for a "Quick" cycle on the Maytag Neptune to take 53 minutes? "Normal...
(More)
Is it normal for a "Quick" cycle on the Maytag Neptune to take 53 minutes? "Normal Soil" is 78 minutes? My old machine did a great job in 25 minutes.
hand wash is the only load selection light that comes on, seems to be working fine otherwise
maytag...
(More)
hand wash is the only load selection light that comes on, seems to be working fine otherwise
maytag neptune washer
model number MAH 5500B, purchased 2001
My Maytag Neptune dryer makes a buzzing sound when I turn it on. Does that mean the motor is about...
(More)
My Maytag Neptune dryer makes a buzzing sound when I turn it on. Does that mean the motor is about to go out?
Put a load of pants and sweatshirts in the washer, hit start and it started for a brief minute then...
(More)
Put a load of pants and sweatshirts in the washer, hit start and it started for a brief minute then it went into pause mode and on the display it read do then about a minute later the display read fl but the door will not unlatch at all. What do I do?