Question about Epson Stylus CX6600 All-In-One InkJet Printer

1 Answer

Epson Stylus CX6600 wont power up/scan light turns on then goes off.

Our work printer; an Epson Stylus CX6600; will not power up. When the power button is pressed the scan button may, or may not light up then go off after a few random moments when it does. The front digital display stays blank and no sound comes from the printer, not even the pulleys for the ink cartages come to life. We have tried unplugging/replugging it in, moving it to a new outlet, and doing a full re-install of the drivers to no luck. Any help would be appreciated.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 161 Answers

This may help...
Check that all the access doors and compartments are closed correctly.
Check paper isn't jammed.
Take out the all the ink cartilages and reset them in correctly
Make sure the rollers are set in place correctly, (if there removable)
Hope this helps a bit

Posted on Feb 09, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Epson stylus 880 printer

"Turn the printer on while holding down both the ink and paper buttons. When the paper light flashes release both buttons", then hold down the ink button for approx. half a minute until the printer lights flash again then release it. That resets the printer.”

Posted on Jun 03, 2008

  • 235 Answers

SOURCE: EPSON Stylus NX110 - 1st Ink Cartridge Replacement

you better have your printer check by a qualified printer tech thus avoiding any further damage to the printer the printer head is the most likely problem to

Posted on Nov 21, 2009

  • 1 Answer

SOURCE: Epson Stylus C62 Error Red light wont go off

Had a paper jam. Cleared it and the red light will not go off. Have turned C62 off and the back on. Problem continues.

Posted on Mar 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have lost my installation cd for a Epson Stylus CX6600 can I download this? Please advise


yes you can download the software that was on the cd from
http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-CX6600/Drivers-Support

Mar 07, 2010 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

I want to scan a document to my computer


have you installed all the scanning software that came with the scanner, Install them and go through these steps to scan a document using Twain;

Overview of the Basic Procedure
This section outlines the basic scanning procedure using a TWAIN-compliant application. For detailed procedure, see the Scanning an Image.
Make sure the CX6600's power cord is plugged in.
Place your materials on the document table.
Start a TWAIN-compliant application.
In the application, open EPSON Scan.
Full Auto Mode:
EPSON Scan automatically previews the images and recognizes the document source and type. images are automatically optimized and scanned.
Home Mode or Professional Mode:
Make settings to optimize images and click Scan.
The scanned images are sent to the application.
Save the scanned images in the application.

Scanning / How to Scan
Scanning an Image
Turning on the CX6600
Placing your materials on the document table
Starting the software and scanning an image
EPSON Scan provides three modes for you to make any scanning settings; Full Auto Mode, Home Mode, and Professional Mode. This section describes how to scan an image in the Full Auto Mode. The Full Auto Mode lets you scan images using automatically-adjusted settings. For more details, see Choosing a Scanning Mode.
Note:

You cannot scan an image with a size that exceeds the available memory or disk space. If you try to scan the image, an alert appears on the screen.
Note for Macintosh users:

Most illustrations shown in this section are for Windows, so they may vary in appearance from what actually appears on your screen. The instructions are the same, except as noted.
Caution:

Before starting the following steps, make sure that all the necessary software including EPSON Scan has been installed. For details about how to install the software, see the Start Here sheet.
Turning on the CX6600
Before turning on the CX6600, make sure it is connected to your computer.
Press the On button to turn on the CX6600. All mode lights flash, then the mode button for the mode you used last lights, meaning it has completed its initialization.

Placing your materials on the document table
You can scan reflective documents (like photos or paper). See Placing Photos and Documents on the Document Table.

Starting the software and scanning an image
You can start EPSON Scan in the following ways.
* Start EPSON Scan directly as a stand alone application
* Start EPSON Scan from a TWAIN-compliant application
This section provides information on how to start EPSON Scan from ArcSoft PhotoImpression. For details on starting EPSON Scan as a stand-alone application, see Starting EPSON Scan.
Note; if you are using Windows 98:

ArcSoft PhotoImpression 5 supports Windows 98 Second Edition or later. For version earlier than Windows 98 Second Edition, use EPSON Scan or other TWAIN compliant applications. See Starting EPSON Scan for details.
Start ArcSoft PhotoImpression.
For Windows users:
Click Start, point to All Programs (for Windows XP users) or Programs (for Windows 98, Me, or 2000 users), and select ArcSoft PhotoImpression 5. Click PhotoImpression 5.
For Macintosh users:
Double-click the Applications folder on your Macintosh HD, then double-click the PhotoImpression folder. Finally, double-click the PhotoImpression 5 icon.
Click the Camera/Scanner button.
Select a file format, location, and file name, then click Epson Stylus CX6600. EPSON Scan starts. See File formats for information on file formats.
Note for Windows XP users:

Do not choose WIA-Epson Stylus CX6600 from the menu to select the CX6600. If you select it, you cannot use the Epson scanner function fully.
EPSON Scan automatically previews the image, and recognizes the document source and type.
If you want to select more settings, click Pause, then click Options to open the Options dialog box. For more details on settings, click the Help button in the Option dialog box.
After EPSON Scan has previewed and recognized the document type, the following window appears. You can see the document type in the window.
EPSON Scan automatically locates the target images, modifies their skew, and starts scanning.
Caution:

Do not open the scanner unit during scanning or copying; otherwise, you may damage the CX6600.
Note:

Be aware that clicking Cancel on this screen closes EPSON Scan.
The scanned image is sent to ArcSoft PhotoImpression.
Note:

* Depending on the image you want to scan, you may not get the expected scanned image. In this case, scan the image in the Home Mode or Professional Mode.

* When you scan in the Full Auto Mode, black and white documents might be recognized as a color document. In this case, scan the image in the Home Mode or Professional Mode.
If you still experience problem scanning, un-install the entire software and re-install them all over. Install all the packages in the CD. Cheers!

May 19, 2009 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Unable to use Memory Card with PC VISTA


The scanning software for your printer must be installed separately from the printer software on Vista systems. The following link will take you to the page to download the scanning software....just find your model number and select it:
http://www.epson.ca/cgi-bin/ceStore/support/supAdvice.jsp?BV_UseBVCookie=yes&noteoid=86150&type=highlights

May 03, 2009 | Office Equipment & Supplies

1 Answer

PRINTER WONT PRINT


Follow step by step directions on the inside of the cover.

Feb 05, 2009 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Card reader not working


I think 1 MB is the limit. Get a cheapy multi USB card reader.

Oct 23, 2008 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

CX6600 SCANNER


Download the Reference guide for your machine from th eEpson web site. It will inform you what you need to do to complete the scanning options. you can also download the Epson Scan utility to help with scanning to email etc.

Jun 02, 2008 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Epson stylus cx6600


hi-
are you using an intel based mac or power pc mac?

download the driver from this link

EPSON

and inform me if you have issues still

May 15, 2008 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Will not turn on, have tried various outlets


1 of 2 things.
Either you have an inline fuse on the power supply that has failed.
If there is not a fuse, then the power supply itself has failed.

Mar 14, 2008 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Film viewing and scanning


Sorry, but you won't be able to do that with a CX6600. In order to scan film negatives, you need a printer that includes a transparency unit in the lid, that is, a panel that lights the film from behind. Also, the CX6600's scan resolution wasn't designed for detailed film scans. Try the online Epson Store at www.epsonstore.com where you can often find good deals on refurbished stand-alone scanners with transparency units.

Jan 21, 2008 | Epson Stylus CX6600 All-In-One InkJet...

Not finding what you are looking for?
Epson Stylus CX6600 All-In-One InkJet Printer Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...